Moshell (Basic Command)

Moshell (Basic command)
1.
momt ( MO Tree )
22. get . ipaddress , get . vid (IP Address VLAN ID )
2.
moshell 169.254.1.10 , lt all (RBS )
23. cabr , caba ( )
3.
cvcu, cvls, cvset, cvrm, cvmk (cv )
24. cabx , lhsh BXP_3_1 fui get vswr ( VSWR )
4.
acc 0 manualrestart (Restart RBS )
25. cabx , lhsh BXP_0_1 warpA read DL_PM_PA0_C0
5.
st mme , st fdd , get mme ipaddress
6.
st cell , bl , deb ( Cell Block, Unblock )
27. pr security ( Security )
7.
pr AntennaUnit , lpr RfBranch, stde , st riport ( RU )
28. get systemc ( System constant : customer )
8.
diff (Compare MO)
29. get . nooftx , noofrx ( ANT )
9.
al , ala , alt ( Alarm Check )
30. pr anr ( ANR )
( MME, cell )
( )
26. get . Power ( )
10. lga , lgx, lg ( alarm log log )
31. license server , get . fingerprint (License )
11. get . tac ( tac )
32. acc IpAccessHostEt ping (ping )
12. get . earfcn ( Center )
33. Statistics DATA
13. get . band
34.
get . inac , set Rcs=1 tInactivityTimer ( Inactivity timer )
35.
get upgr stat, pr upgrade ( Upgrade )
( Bandwidth )
14. get . feature ( Feature )

15. inv
( license State )
16. get sync ( Clock )

17. get . ntp NTP ( )
18. get 1 , readclock
( )
19. ue print -admitted ( call )

20. appsh oper , appsh data <{udp|gtp}> <sid> (bearer )
21. get extemal , get term , get point , get . relation (Handover )
Understand the entire MO Tree

ENB03> momt
110328-16:10:46 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/2764
-------------------------------MO classes under ManagedElement
-------------------------------ENodeBFunction[1] (systemCreated)
AdmissionControl[1] (systemCreated)
AirIfLoadProfile[0-24]
AnrFunction[1] (systemCreated)
AnrFunctionEUtran[1] (systemCreated)
AnrFunctionGeran[1] (systemCreated)
AnrFunctionUtran[1] (systemCreated)
Cdma2000Network[0-1]
Cdma2000FreqBand[0-18]
Cdma2000Freq[0-64]
ExternalCdma2000Cell[0-64]
EUtraNetwork[1] (systemCreated)
EUtranFrequency[0-24]
ExternalENodeBFunction[0-256]
ExternalEUtranCellFDD[0-24]
ExternalEUtranCellTDD[0-24]
TermPointToENB[0-1]
EUtranCellFDD[0-24]
Cdma2000FreqBandRelation[0-32]
Cdma2000CellRelation[0-64]
Cdma2000FreqRelation[0-64]
EUtranFreqRelation[0-8]
EUtranCellRelation[0-64]
GeranFreqGroupRelation[0-16]
GeranCellRelation[0-64]
UeMeasControl[1] (systemCreated)
PmUeMeasControl[0-1]
ReportConfigA1Prim[1] (systemCreated)
ReportConfigA1Sec[1] (systemCreated)
ReportConfigA5[1] (systemCreated)
ReportConfigA5Anr[1] (systemCreated)
ReportConfigB2Cdma2000[1] (systemCreated)
ReportConfigB2Geran[1] (systemCreated)
ReportConfigB2Utra[1] (systemCreated)
ReportConfigEUtraBadCovPrim[1] (systemCreated)
ReportConfigEUtraBadCovSec[1] (systemCreated)
ReportConfigEUtraBestCell[1] (systemCreated)
ReportConfigEUtraBestCellAnr[1] (systemCreated)
ReportConfigEUtraIntraFreqPm[0-2]
UtranFreqRelation[0-16]
UtranCellRelation[0-64]
EUtranCellTDD[0-24]
RU
DU
Connect to RBS
[~]$ moshell 169.254.1.10

####################################################################
#
Welcome to MoShell 8.0r
#
#
Finn Magnusson, Jan Pettersson
#
#
http://utran01.au.ao.ericsson.se/moshell
#
#
Contact: [email protected]
#
#
[email protected]
#
####################################################################
Checking ip contact...OK
HELP MENU
:h
BASIC MO COMMANDS : m
OTHER MO COMMANDS : n
OTHER COMMANDS
:o
PM COMMANDS
:p
QUIT
:q
1. Have laptop setting same as left.

2. Enter moshell 169.254.1.10 for connection.
3. Enter lt all
169.254.1.10> lt all
110323-21:50:44 169.254.1.10 8.0r stopfile=/tmp/2920
Checking MOM version...ERBS_NODE_MODEL_B_1_40
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz .....................................................Done.
Using paramfile /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
Fetching IOR file...Done.
Connecting to 10.0.0.165:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_23, jacoms=R73D19, jacorb=R73D01)
**** Welcome to the Simple Mo Browser (version 3.0)!
Trying file=C:/cygwin/home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110323-215038_1808/ior1808
**** Test Construction OK
****
$mobrowser_pid = 3436
Connected to 169.254.1.10 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB04,ManagedElement=1)
Last MO: 1043. Loaded 1043 MOs. Total: 1044 MOs.
ENB04>
1. The above is a access method when you connect directly to LNB PORT in the station.
2. In case of access through LSM, use (10.0.0.163)
CV
What is CV ?
ENB02> cvcu
Similar to system restoration point of Windows.

It has all Parameter and Version information for rollback
to the previous status promptly in case of failure to
reduce no service time. ( Maximum number of CVs
stored in each station is 50.)
===================================================================================================
110326-10:42
CV Name
Upgrade Package
Release
===================================================================================================
CV type: Manual rollback point (Made by user)
Startable:
selfconfig_autocreated1
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
Loaded:
RU_SW_Change_R25S-alarmc_cdmaHOcell33
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
Installation rollback point (Automatically
Executing:
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
created
during
upgrade)
Last created:
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
System rollback point (Automatically
------------------------------------------------------------------------------------------------------------------Current UpgradePkg:
UpgradePackage=R9AS
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
created by system)
AutoCreatedCV:
Disabled
Countdown status:
Deactivated
Ongoing CV activity: 0 (IDLE)
Startable
: Display CV activated at the time of reset
Rollback status:
Rollback is off
Loaded
:
=================================================================================================
ENB02> cvls
Executing
: Display CV currently in operation
Last created : Display CV created most recently

==================================================================================================
110326-10:42
CV Name
Upgrade Package
Release
==================================================================================================
Startable:
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
Loaded:
RU_SW_Change_R25S-alarmc_cdmaHOcell33
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
Executing:
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
Last created:
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
------------------------------------------------------------------------------------------------------------------Current UpgradePkg:
UpgradePackage=R9AS
CXP102051/12_R9AS
L11B (LSV59.3-4-CPP_8.0.2)
AutoCreatedCV:
Disabled
Countdown status:
Deactivated
Ongoing CV activity: 0 (IDLE)
Rollback status:
Rollback is off
===================================================================================================
UP name
ProductData
CVs LMs PrDate LastCV state
Release
CompatIndex
===================================================================================================
InitialUP
0_0
0 00
IDLE, ONLY_DELETEABLE
Virtual_2_of_CXP102051/10_R5EA CXP102051/10_R5EA
0 0 100906
IDLE, ONLY_DELETEABLE L11A
Virtual_0_of_CXP102051/12_R8AA CXP102051/12_R8AA
1 0 110216 110314 IDLE, ONLY_DELETEABLE L11B
Virtual_1_of_CXP102051/12_R7AK CXP102051/12_R7AK
4 0 110203 110315 IDLE, ONLY_DELETEABLE L11B (LSV59.3-3-CPP_8.0.2)
R9BE%2
CXP102051/10_R9BE/2 29 192 101207 110323 IDLE, UPGRADE_COMPLETED L11A.0.1.0 (EP30-CPP_8.0.0.3) CXP102051%1-R4
R9AS
CXP102051/12_R9AS 16 200 110303 110325 IDLE, UPGRADE_COMPLETED L11B (LSV59.3-4-CPP_8.0.2) CXP102051%1-R4
==================================================================================================
CV Name
Creation Date UpgradePackage
Release Type
Operator
Comment
==================================================================================================
BasicCV_CXP102106%10_R9BE%2
2010-12-07 13:28 CXP102051/10_R9BE/2 L11A.0.1.0 other unknown
none
LTE_Initial
2010-12-07 13:33 CXP102051/10_R9BE/2 L11A.0.1.0 other ProductionTest ProductionTest
L11A-artiza-vlanoff
2011-03-01 02:26 CXP102051/10_R9BE/2 L11A.0.1.0 other cwcho
none
===================================================================================================
>>> Total: 50 CV's, 6 UP's
ENB03>
1.
2.
3.
4.
5.
6.
7.
Current CV check: cvcu

Entire CV check: cvls
CV change: cvset ( Select certain CV among saved
CV creation: cvmk
CV deletion: cvrm
CV creation & startable change: cvms
reset: acc 0 manualrestart <
y <
3 <
0 <
0 <
6.
pol 5 5 <
Restart RBS
ENB03> acc 0 manualrestart
The node has been restarted on a different CV: from OptimizedUDPDL2 to selfconfig_autocreated2.
Rereading MOM and MIB...
Last MO: 835. Loaded 835 MOs. Total: 836 MOs.
Checking MOM version...ERBS_NODE_MODEL_B_1_40
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ....................................................Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ...........................................................................Done.
Call Action manualrestart on following 1 MOs ?
===================================================================================
0 ManagedElement=1
INFO: The RBS node ENB03 will be restarted on CV: selfconfig_autocreated2
===================================================================================
Call action manualrestart on 1 MOs. Are you Sure [y/n] ? y
1.
2.
3.
4.
5.
acc 0 manualrestart
y
3
0
0
pol 5 5
Use it when you want to know
when the signal resumes after
disconnection.
================================================================================================================
Proxy MO
Action
Nr of Params
================================================================================================================
0 ManagedElement=1
manualRestart
3
Parameter 1 of 3, restartRank (enumRef-RestartRank):
Enter one of the following integers: 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST: 3
Parameter 2 of 3, restartReason (enumRef-RestartReason):
Enter one of the following integers: 0:PLANNED_RECONFIGURATION, 1:UNPLANNED_NODE_EXTERNAL_PROBLEMS, 2:UNPLANNED_NODE_UPGRADE_PROBLEMS, 3:UNPL
ANNED_O_AND_M_ISSUE, 4:UNPLANNED_CYCLIC_RECOVERY, 5:UNPLANNED_LOCKED_RESOURCES, 6:UNPLANNED_COLD_WITH_HW_TEST,
7:UNPLANNED_CALL_PROCESSING_DEGRA
DATION, 8:UNPLANNED_LOW_COVERAGE, 30:UPGRADE_BOARD_RESTART: 0
Parameter 3 of 3, restartInfo (string): 0
>>> Return value = null
===============================================================================================================
Total: 1 MOs attempted, 1 MOs actioned
169.254.1.10> polu 5 5
ENB03>
ENB03> pol 5 5
110331-12:35:07 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE

stopfile=/tmp/2168
pol 5: interval 5: wait time

Waiting 5 seconds before starting to poll...
No contact to port 80, retrying in 1 second...
CORBA.OBJECT_NOT_EXIST Polling for 0m41s,
MO service is ready.
ENB03>

No ongoing activity on the UpgradePackage MOs.
169.254.1.10> pol 5 5
MO
MO
MO
MO
service
service
service
service
not
not
not
not
ready,
ready,
ready,
ready,
retrying
retrying
retrying
retrying
in
in
in
in
5
5
5
5
seconds...
seconds...
seconds...
seconds...

stopfile=/tmp/2168
MO service is ready.
169.254.1.10>
MME , CELL Status

eNB3> lst mme
To check MME status
110310-16:38:07 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/4728

===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
536 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,TermPointToMme=LGERMME01
===================================================================================
Total: 1 MOs
eNB3> lst fdd
Check CELL status

Same command lst cell

===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
854 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=33
879 0 (LOCKED) 0 (DISABLED) ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Total: 3 MOs
MME IP modification method (From

station side)
ENB03>
ENB03>
ENB03>
ENB03>
ENB03>
get mme ip
bl mme
set mme ipAddress1 100.100.100.150
deb mme
lst mme
eNB3> st sector
===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
1030 1 (UNLOCKED) 0 (DISABLED) SectorEquipmentFunction=S1
1036 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S3
===================================================================================
Total: 3 MOs
eNB3> get mme ipaddress

=================================================================================================================
MO
Attribute
Value
=================================================================================================================
TermPointToMme=LGERMME01
ipAddress1
4.2.0.132
ipAddress2
0.0.0.0
usedIpAddress
4.2.0.132
=================================================================================================================
Total: 1 MOs
MME Node addition method

cr ENodeBFunction=1,TermPointToMme=LGERMME02
lget ENodeBFunction=1,TermPointToMme=LGERMME02
lset ENodeBFunction=1,TermPointToMme=LGERMME02 ipAddress1 xxx.xxx.xxx.xxx
deb LGERMME02
Block, Unblock
ENB03> st cell
Check Cell status.

===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
147
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
===================================================================================
ENB03> deb 879
Unblock Cell no. 32, currently

blocked.

Deblock following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Deblock 1 MOs. Are you Sure [y/n] ? y
====================================================================================
Id MO
administrativeState Result
====================================================================================
879 EUtranCellFDD=32
1
>>> Set.
====================================================================================
Total: 1 MOs attempted, 1 MOs set
ENB03> bl 879
Block Cell no. 32, currently

unblocked.

Block following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Block 1 MOs. Are you Sure [y/n] ? y
RU Check
ENB03> lk fdd
===============================================================================
Proxy Adm State
Op. State
MOs linked to 476:EUtranCellFDD=31
===============================================================================
476 1 (UNLOCKED) 0 (DISABLED) EUtranCellFDD=31
477
EUtranCellFDD=31,UeMeasControl=1
480
EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBestCell=1
479
EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovSec=1
478
EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovPrim=1
147
AntennaUnitGroup=1,RfBranch=1
149
AntennaUnitGroup=1,RfBranch=2
123
0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_1
131
143
135
126 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=A
130 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=B
138 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=A
141 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=B
127 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXA_IO
125 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXB_IO
140 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXA_IO
142 0 (LOCKED)
0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXB_IO
===============================================================================
Total: 20 MOs
eNB3> st aux
===============================================================================
Proxy Adm State
Op. State
MO
===============================================================================
122 1 (UNLOCKED) 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1
134 1 (UNLOCKED) 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2
===============================================================================
Total: 2 MOs
eNB3> st ru
===============================================================================
Proxy Adm State
Op. State
MO
===============================================================================
63
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,GeneralProcessorUnit=1
122 1 (UNLOCKED)
0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1
124
0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru
134 1 (UNLOCKED)
0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2
136
0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru
===============================================================================
Total: 5 MOs
eNB3> lh ru vii
110331-15:41:29 169.254.1.10 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/
Please enter Node Password:
Checking available boards on node...
...
Created following board-groups: all, allp, mp, bp, tu, coremp, ommp, scb, sxb, scx, sccpmp
, et, etmfg, etmfx, aal2ap, aal2ncc, aal2cpsrc, aal2rh, xp, rax, tx,gcpu.
>>> Type "bp" to view available board-groups and "bp <group>" to view group contents.
============================================================
$ lhsh BXP_0_1 vii
BXP_0_1: Indicated states:
BXP_0_1: Red:
BXP_0_1:
Default
(off)
BXP_0_1: Green:
BXP_0_1:
Default
(steady light)
BXP_0_1: Yellow:
BXP_0_1:
Default
(off)
===========================================================
$ lhsh BXP_3_1 vii
BXP_3_1: Indicated states:
BXP_3_1: Red:
BXP_3_1:
Default
(off)
BXP_3_1: Green:
BXP_3_1:
Default
(steady light)
BXP_3_1: Yellow:
BXP_3_1:
Default
(off)
$
RU Check
ENB03> st de
===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
119
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,DeviceGroup=dul
146
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1
147
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
160
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1
161
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1,RicmDeviceSet=1
211
1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru
213
1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,TrDeviceSet=tr
220
225
231
232
243
246
255
261
266
270
===================================================================================
Total: 17 MOs
ENB03> st riport
===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
126
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=B
127
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=C
136
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=E
139
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
142
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
157
1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=F
209
1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_1
210
0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_2
227
228
238
239
242
250
253
254
265
273
===================================================================================
Total: 18 MOs
RU Check
ENB03> pr AntennaUnit
===================================================================================
Proxy MO
===================================================================================
184 Equipment=1,AntennaUnitGroup=1
187 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1
===================================================================================
Total: 6 Mos
ENB03> pr rfport
===================================================================================
Proxy MO
===================================================================================
212 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXB_IO
215 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=B
216 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=A
217 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXA_IO
===================================================================================
Total: 24 Mos
ENB03> pr branch
===================================================================================
Proxy MO
===================================================================================
185 Equipment=1,AntennaUnitGroup=1,RfBranch=2
===================================================================================
Total: 6 MOs
AntennaUnitGroup MO
Compare MO
ENB03> st fdd
===================================================================================
Proxy Adm State
Op. State
MO
===================================================================================
===================================================================================
Total: 3 MOs
ENB03> diff 854 879

=====================================================================================================
MO
EUtranCellFDD=33
EUtranCellFDD=32
=====================================================================================================
redirectionInfoRefPrio1
Cdma2000Network=1,Cdma2000FreqBand=1,Cdma2000Freq=400
sectorFunctionRef
SectorEquipmentFunction=S3
mappingInfo.mappingInfo SIB8 1 (MAPPED_SI_1)
0 (NOT_MAPPED)
EUtranCellFDDId
33
32
administrativeState
1 (UNLOCKED)
0 (LOCKED)
availabilityStatus
0 (NO_STATUS)
8 (OFF_LINE)
noOfUsedTxAntennas
1
-1
operationalState
1 (ENABLED)
0 (DISABLED)
physicalLayerCellIdGroup 11
10
cellId
33
32
physicalLayerSubCellId
0
2
=====================================================================================================
Check Alarm
ENB02> al
Brief check of Alarm al

Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem
Cause
Mo-Reference
================================================================================================
Maj Disconnected
equipment_malfunction
HwUnit=SCU
Maj ResourceAllocationFailure
configuration_or_customizing_error EUtranCellFDD=21
Maj TU Synch Reference Loss of Signal loss_of_signal
Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault
Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault
Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
>>> Total: 9 Alarms (0 Critical, 5 Major)
ENB02> ala
Detailed check of Alarm ala

Check Alarm by the hour alt

Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem
Cause
Mo-Reference
================================================================================================
Maj Disconnected
HwUnit=SCU
Maj TU Synch Reference Loss of Signal loss_of_signal
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault
Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault
Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
Alarm Id : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB02_4
Event Time : 2011. 3. 10 $ 9:51:13
Perceived Severity : Major
Check log
ENB03> lga
Startdate=19661031.231320, Enddate=20110329.074624
....................Get /c/logfiles/alarm_event/ALARM_LOG.xml /home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110328-161024_2612/alarmLog2
764.xml ... OK
=======================================================================================================
Timestamp (UTC)
S Problem
Cause
MO-reference
=======================================================================================================
2011-03-28 01:53:03 AL m Loss of Synch Reference Redundancy
replaceable_unit_problem
Synchronization=1
2011-03-28 02:42:20 AL * Synch Reference Not Reliable
clock_synchronisation_problem Synchronization=1
2011-03-28 02:42:20 AL * Loss of Synch Reference Redundancy
Synchronization=1
2011-03-28 05:52:58 AL M ServiceUnavailable
underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 05:53:37 AL * ServiceUnavailable
underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 06:23:23 AL M TU Synch Reference Loss of Signal
loss_of_signal
2011-03-28 06:23:47 AL M Synch Reference Not Reliable
clock_synchronisation_problem
Synchronization=1
2011-03-28 06:24:31 AL * Synch Reference Not Reliable
clock_synchronisation_problem
Synchronization=1
2011-03-28 06:27:18 AL M System Clock in Holdover Mode
Synchronization=1
ENB03> lg
***************************************************************************************
lg[acdefghilmnopqrstuvwxyz] [-l <logdirectory|logfile|zipfile>] [-m <minustime>] [-p <plustime>] [-s <startdate>] [-e <enddate>] [-g
<boardgroup
>] [-n <nodefilter>] [|<unixcmds>]
***************************************************************************************
Fetching and processing of node logs
All options can be combined together, except options "d","w","x","f" which can only be combined with the options "r" and "c".
Log Options:
************
- a: Alarm log (ALARM_LOG.xml). History of alarms raising and ceasing.
- x: Active alarms (ALARM_LOG.xml). Snapshot of alarms active on a specific date/time given in -m/-s option.
- e: Event log (EVENT_LOG.xml). History of MO events.
- v: Availability log (CELLO_AVAILABILITY2_LOG.xml). History of node/board/program restarts.
- s: System log (/c/logfiles/systemlog). History of node/board/program restarts.
- p: Post Mortem Dumps (/c/pmd) and LTE ENodeB error files (/c/logfiles/troubleshooting/error). History of board/program crashes. PMD files are
saved permanently in moshell_logfiles/logs_moshell/pmdfiles/<nodeaddress>/pmd .
- u: Upgrade log (Trace.log and Trace.log_old). History of system upgrades.
- d: Downtime log. History of node outages.
- o: MO command log (CORBA_AUDITTRAIL_LOG.xml). History of MO write commands (set/action/create/delete).
- q: MO command log in "trun" format (CORBA_AUDITTRAIL_LOG.xml). Useful for recovering configuration data which was not saved to CV before node
Check Tac
ENB03> get . tac
==========================================================================================================
=======
MO
Attribute
Value
==========================================================================================================
=======
Security=1
targetMonitorPortActive true
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-1 tac
4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-2 tac
4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=Samsung tac
4
EUtraNetwork=1,ExternalENodeBFunction=NSN,ExternalEUtranCellFDD=NSN tac
52
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-21 tac
4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-22 tac
4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=ENB02 tac
4
TAC : Tracking Area Code
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=43 tac
4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=42 tac
4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=4506-4-41 tac
4
EUtranCellFDD=33
dlInterferenceManagementActive true
EUtranCellFDD=33
tac
2
EUtranCellFDD=33
ulInterferenceManagementActive true
EUtranCellFDD=32
EUtranCellFDD=32
tac
2
EUtranCellFDD=32
EUtranCellFDD=31
EUtranCellFDD=31
tac
2
EUtranCellFDD=31
==========================================================================================================
=======
Total: 14 Mos
ENB04> eset1 EUtranCellFDD tac 4

Set following 3 attributes?
============================================================================================================
tac
tac
tac
============================================================================================================
Set 3 attributes. Are you Sure [y/n] ? y
============================================================================================================
=====
Id MO
Attribute
Value
Result
============================================================================================================
=====
tac
3
>>> Set.
tac
3
>>> Set.
Check Center frequency
ENB04> get . earfcn
Check frequency allocation

information
110322-21:48:28 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/2744

=================================================================================================================
LGU+ Center Frequency
MO
Attribute
Value
=================================================================================================================
889.0Mhz(DL) : 2600
EUtranCellFDD=41
earfcndl
2600
844.0Mhz(UL) : 20600
EUtranCellFDD=41
earfcnul
20600
EUtranCellFDD=43
earfcndl
2600
EUtranCellFDD=43
earfcnul
20600
EUtranCellFDD=42
earfcndl
2600
EUtranCellFDD=42
earfcnul
20600
=================================================================================================================
Total: 3 MOs
set EUtranCellFDD earfcnul 21400

set EUtranCellFDD earfcndl 3400
LGU+ Center Freq
889.0Mhz(DL) : 2600
844.0Mhz(UL) : 20600
set EUtranCellFDD earfcnul 20600
set EUtranCellFDD earfcndl 2600
Attribute 1 of 8, earfcndl (long): 3400
Attribute 2 of 8, earfcnul (long): 21400
Check frequency bandwidth

Bandwidth change
ENB02> get . band
Use for frequency Bandwidth

check
=================================================================================================
MO
Attribute
Value
=================================================================================================
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz CapacityChannelBandwidthId 10MHz
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz capacityUnitChannelBandwidth Number of 10000kHz licenses
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz keyIdChannelBandwidth CXC4010718
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseCapacityChannelBandwidth 1
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseStateChannelBandwidth 1 (ENABLED)
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz CapacityChannelBandwidthId 15MHz
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz capacityUnitChannelBandwidth Number of 15000kHz licenses
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz keyIdChannelBandwidth CXC4010719
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseCapacityChannelBandwidth 1
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseStateChannelBandwidth 1 (ENABLED)
Licensing=1,CapacityLicenses=1,UlBasebandCapacity=1
UlBasebandCapacityId 1
ENodeBFunction=1
dlTransNwBandwidth 1000
ENodeBFunction=1
ulTransNwBandwidth 1000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 dlChannelBandwidth 10000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ulChannelBandwidth 10000
Uplink to no. 21 Cell
bandwidth is 10Mhz
EUtranCellFDD=21
dlChannelBandwidth 10000
EUtranCellFDD=21
prsBandwidth
4 (N100)
EUtranCellFDD=21
EUtranCellFDD=22
ulChannelBandwidth 10000
get . dlchannel
get . ulchannel
lst cell
bl 865
set EUtranCellFDD=31 dlChannelBandwidth 5000
set EUtranCellFDD=31 ulChannelBandwidth 5000
get . Channelband
lst cell
deb 865
get 865
EUtranCellFDD=22
prsBandwidth
4 (N100)
Downlink to no. 21 Cell
EUtranCellFDD=22
downlink bandwidth is
EUtranCellFDD=22,EUtranFreqRelation=3
allowedMeasBandwidth 6
10Mhz
Cdma2000Network=1,Cdma2000FreqBand=1
Cdma2000FreqBandId 1
Cdma2000Network=1,Cdma2000FreqBand=1
hrpdBandClass
4 (BAND_CLASS_4)
EUtranCellFDD=23
EUtranCellFDD=23
prsBandwidth
4 (N100)
EUtranCellFDD=23
AdmissionControl=1
dlTransNwBandwidth 1000
AdmissionControl=1
ulTransNwBandwidth 1000
fqBand
0
fqBand
5
fqBand
5
================================================================================================
Total: 24 MOs
Check Feature (Major functions)

ENB02> get . feature
Status check command to see if Feature(major functions) are
ACTIVATED or DEACTIVATED
==========================================================================================
MO
Attribute
Valu e
==========================================================================================
Licensing=1,OptionalFeatures=1
OptionalFeaturesId 1
Licensing=1,OptionalFeatures=1,SharedNetworkSupport=1
featureStateSharedNetworkSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Dl64Qam=1
featureStateDl64Qam 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,MixedMode=1
featureStateMixedMode 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHandover=1
featureStateIntraLTEHandover 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbForLimitedDualRadioUE=1 featureStateCsfbForLimitedDualRadioUE 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AirIfLoadGenerator=1
featureStateAilg 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetSupport=1
featureStateRetSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Anr=1
featureStateAnr 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Aisgv2FwDownload=1
featureStateAisgv2FwDownload 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,InterFrequencyLTEHandover=1 featureStateInterFrequencyLTEHandover 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,Irc=1
featureStateIrc 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,MultiErabsPerUser=1
featureStateMultiErabsPerUser 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,WcdmaSessionContinuity=1
featureStateWcdmaSessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RbsEventStreamer=1
featureStateEventStreaming 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,OtdoaSupl=1
featureStateOtdoaSupl 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RlcUm=1
featureStateRlcUm 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,PmInitiatedUeMeasurements=1 featureStatePmInitiatedUeMeasurements 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1 featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AgpsSupl=1
featureStateAgpsSupl 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,InterFrequencySessionContinuity=1 featureStateInterFrequencySessionContinuity 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,UePosCellId=1
featureStateCellId 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetCascading=1
featureStateRetCascading 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,VswrSupervision=1
featureStateVswrSupervision 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1
featureStateDualAntDlPerfPkg 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHODataFwd=1
featureStateIntraLTEHODataFwd 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,GsmSessionContinuity=1
featureStateGsmSessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,TmaSupport=1
featureStateTmaSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Cdma2000SessionContinuity=1 featureStateCdma2000SessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetConfigurationMgt=1
featureStateRetConfigurationMgt 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,MaximumCellRange=1
featureStateMaximumCellRange 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,QosAwareScheduler=1
featureStateQosAwareScheduler 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbToGsmWcdma=1
featureStateCsfbToGsmWcdma 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Drx=1
featureStateDrx 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,EcsCsfb=1
featureStateEcsCsfb 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Ul16Qam=1
featureStateUl16Qam 1 (ACTIVATED)
IpSec=1
featureState
0 (DEACTIVATED)
=========================================================================================
Total: 37 MOs
For example) Certain function

(ANR : Auto Neighbor
relation) is DEACTIVATED,
thus will not work.
When the function is

DEACTIVATED, SIB5 doesnt go
down.
When the function is
DEACTIVATED, it is impossible to
have MIMO configuration.
Check license State

ENB02> inv
Use for License Status Check
=================================================================================================================
Feature
keyId
licenseState
featureState
serviceState
description
=================================================================================================================
AgpsSupl=1
CXC4010963 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
AirIfLoadGenerator=1
Aisgv2FwDownload=1
Anr=1
Automated Neighbour Relations
Cdma2000SessionContinuity=1
CDMA2000 Session continuity, coverage triggered
CsfbForLimitedDualRadioUE=1
CsfbToGsmWcdma=1
CXC4010956 1 (ENABLED) 0 (DEACTIVATED)
0 (INOPERABLE)
Dl64Qam=1
CXC4010610 1 (ENABLED) 1 (ACTIVATED)
1 (OPERABLE)
64-QAM DL
Drx=1
DualAntDlPerfPkg=1
1 (OPERABLE)
Dual Antenna DL Performance Package
EcsCsfb=1
GsmSessionContinuity=1
0 (INOPERABLE)
GERAN Session continuity, coverage triggered
SharedNetworkSupport=1
CXC4010960 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
TimeAndPhaseSynchWithGPS=1 CXC4010917 0 (DISABLED) 0 (DEACTIVATED)
0 (INOPERABLE)
TmaSupport=1
TMA Support
UePosCellId=1
Ul16Qam=1
1 (OPERABLE)
16-QAM UL
VswrSupervision=1
0 (INOPERABLE)
VSWR
WcdmaSessionContinuity=1
WCDMA Session continuity, coverage triggered
===============================================================================================================
===============================================================================================================
Capacity
keyId
licenseState
licenseCapacity capacityUnit
hardLimit
percentileConf
===============================================================================================================
ChannelBandwidth=10MHz
CXC4010718 1 (ENABLED)
1
Nr of 10000kHz licenses
1
ChannelBandwidth=1p4Mhz
CXC4010721 0 (DISABLED) 0
1
CXC4010722 0 (DISABLED)
0
1
ConnectedUsers=1
500
Nr of Connected Users
20 0
90
DlBasebandCapacity=1
173
Mbit/s
65535
90
DlPrbCapacity=1
65535
Nr of PRBs
65535
90
OutputPower=40Watt
6
Nr of 40 Watt Licenses
OutputPower=60Watt
6
Nr of 60 Watt Licenses
UlBasebandCapacity=1
56
Mbit/s
65535
90
UlPrbCapacity=1
65535
Nr of PRBs
65535
90
================================================================================================================
Check Clock status

LOCK Hold over
No impact on calls
Free Running Loss of tracking

Cell operation stat disable
ENB02> get sync
UNKNOWN_MODE
STARTUP_MODE

2
LOCKED_MODE
=================================================================================================================
39
SystemFunctions=1,Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1
3
HOLD_OVER_MODE
=================================================================================================================
TimeAndPhaseSynchWithGPSId
1
4
FREE_RUNNING_MODE
featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED)
keyIdTimeAndPhaseSynchWithGPS
CXC4010917
5
FAILED_MODE
licenseStateTimeAndPhaseSynchWithGPS 0 (DISABLED)
serviceStateTimeAndPhaseSynchWithGPS 0 (INOPERABLE)
6
LOSS_OF_TRACKING_MODE
=================================================================================================================
60
TransportNetwork=1,Synchronization=1
7
NOT_APPLICABLE
=================================================================================================================
SynchronizationId
1
degradationIsFault
0 (DEGR_NOT_FAULT)
ACTIVE : 2, INACTIVE : 1
nodeSystemClock
2 (LOCKED_MODE)
syncRefActivity
i[8] = 1 2 1 1 1 1 1 1
syncRefPriority
i[8] = 1 2 0 0 0 0 0 0
Set Priority
syncRefStatus
i[8] = 0 3 0 0 0 0 0 0
syncReference
[8] =
>>> syncReference = Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Normal Lock status
>>> syncReference = IpSystem=1,IpAccessHostEt=1,IpSyncRef=1
>>> syncReference =
>>> syncReference =
>>> syncReference =
0
FAILED
>>> syncReference =
>>> syncReference =
1
DEGRADED
>>> syncReference =
userLabel
2
LOSS_OF_TRACKING
=================================================================================================================
114
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
3
OK
=================================================================================================================
TuSyncRefId
GPS
4
REF_PATH_FAILED_A
administrativeState
1 (UNLOCKED)
availabilityStatus
2 (FAILED)
5
REF_PATH_FAILED_B
operationalState
0 (DISABLED)
reservedBy
[1] =
6
NOT_RELIABLE
0
NO_STATUS
>>> reservedBy = TransportNetwork=1,Synchronization=1
userLabel
1
IN_TEST
7
LOW_QUALITY
=================================================================================================================
2
FAILED
960
IpSystem=1,IpAccessHostEt=1,IpSyncRef=1
=================================================================================================================
4
POWER_OFF
IpSyncRefId
1
8
OFF_LINE
administrativeState
1 (UNLOCKED)
availabilityStatus
0 (NO_STATUS)
16
OFF_DUTY
cachedIpAddress
64
DEGRADED
ntpServerIpAddress
172.30.108.217
operationalState
1 (ENABLED)
128
NOT_INSTALLED
reservedBy
[1] =
256
LOG_FULL
>>> reservedBy = TransportNetwork=1,Synchronization=1
syncStatus
2 (OK)
544
DEPENDENCY_LOCKED
userLabel
1056
DEPENDENCY_FAILED
=================================================================================================================
Total: 4 MOs
2080
DEPENDENCY_SHUTTINGDOWN
Check Sync data

0
UNKNOWN_MODE
STARTUP_MODE
The system clock is starting up.
FAILED
Synchronization ref erence cannot perf orm its required tasks.
LOCKED_MODE
The system clock signal on the Timing Unit is locked: a synchronization
ref erence is used to generate the system clock, the clock accuracy is 50 ppb
or better.
DEGRADED
Capability of the synchronization ref erence to perf orm its required tasks is
degraded, f or example, because of high bit error rate. This value is applicable
only f or synchronization ref erences that carry traf f ic, that is, f or ET physical
path terminations.
HOLD_OVER_MODE
The system clock signal on the Timing Unit has holdover quality: no
synchronization ref erence is used to generate the system clock, the clock
accuracy is 50 ppb or better.
LOSS_OF_TRACKING
The algorithm f or system clock regulation cannot f ollow the synchronization
ref erence signal either because of the poor quality of the signal or because of
a HW f ault.
FREE_RUNNING_MODE
The system clock signal on the Timing Unit is f ree-running: no
synchronization ref erence is used to generate the system clock, the clock
accuracy is 4.6 ppm or better.
OK
Synchronization ref erence is capable of perf orming its required tasks.
REF_PATH_FAILED_A
Synchronization ref erence cannot be distributed on plane A.
FAILED_MODE
The system clock signal on the Timing Unit is f ailed: there is f ault in
generating the system clock, no guarantee of clock accuracy level.
REF_PATH_FAILED_B
Synchronization ref erence cannot be distributed on plane B.
LOSS_OF_TRACKING_MODE
The f requency of the system clock is at its upper or lower limit.
NOT_RELIABLE
No NTP packets are received f rom the server. This value is only used f or IP
synchronization ref erences.
NOT_APPLICABLE
The system clock signal on Timing Unit is not applicable: the TUB or the CBU
is not present.
LOW_QUALITY
The time stamp packets received f rom the NTP server are not reliable and the
synchronization algorithm cannot lock to IP ref erence. This value is only used
f or IP synchronization ref erences.
NO_STATUS
No other availability status f or this resource is currently present.
IN_TEST
The resource is undergoing a test procedure. Tests that do not exclude additional users can be present in any operational sta te or administrative state.
FAILED
The resource has an internal f ault that prevents it f rom operating. The operational state is disabled.
POWER_OFF
The resource requires power to be applied and is not powered on. The operational state is disabled.
OFF_LINE
The resource requires a routine operation to be perf ormed to place it online and make it available f or use. The operation may be manual, automatic, or both. The
operational state is disabled or enabled.
16
OFF_DUTY
The resource has been made inactive by some internal control process in accordance with a predetermined time schedule. Under normal conditions the control process
can be expected to reactivate the resource at some scheduled time, and it is theref ore considered to be optional. The operati onal state is enabled or disabled.
64
DEGRADED
The service available f rom the resource is degraded in some respect, such as in speed or operating capacity. However, the res ource remains available f or service, either
because some services are satisf actory or because degraded service is pref erable to no service at all. The operational state is enabled.
128
NOT_INSTALLED
The resource represented by the managed object is not present, or is incomplete. For example, a plug -in unit is missing, a cable is disconnected, or a sof tware module is
not loaded. The operational state is disabled.
256
LOG_FULL
This indicates a log f ull condition. Currently not used.
544
DEPENDENCY_LOCKED
The administrative state of a resource that this resource depends on is locked or the availability status of the other resour ce is dependency locked. The operational state is
disabled.
1056
DEPENDENCY_FAILED
The availability status of a resource that this resource depends on is f ailed or dependency f ailed. The operational state is disabled.
2080
DEPENDENCY_SHUTTINGDOWN
The administrative state of a resource that this resource depends on is shutting down or the availability status of the other resource is dependency shutting down. The
operational state is disabled.
Check NTP (Synchronization Server)
ENB02>
get . ntp

=============================================================================================
MO
Attribute
Value
=============================================================================================
ManagedElementData=1
ntpBurstFlagPrimary true
ntpBurstFlagSecondary false
ntpBurstFlagThird false
ntpMaxPollPrimary 1024
ntpMaxPollSecondary 1024
ntpMaxPollThird 1024
Sync clock based on
ntpMinPollPrimary 16
the server
ntpMinPollSecondary 64
ntpMinPollThird 64
ntpServerAddressPrimary 10.0.0.19
ntpServerAddressSecondary 0.0.0.0
ntpServerAddressThird 0.0.0.0
ntpServiceActivePrimary true
Have StatisticsData
ntpServiceActiveSecondary false
based on the server
ntpServiceActiveThird false
IpAccessHostEt=1
ntpDscp
46
IpAccessHostEt=1
ntpServerMode
0 (DISABLED)
IpAccessHostEt=1,IpSyncRef=1
ntpServerIpAddress 172.30.108.217
measurementPriority 0 (ANR_PRIO)
EUtranCellFDD=21,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
measurementPriority 0 (ANR_PRIO)
measurementPriority 1 (PM_PRIO)
EUtranCellFDD=23,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
==============================================================================================
Total: 8 MOs
Check time
ENB04> get 1
Check time Data

============================================================================
1
============================================================================
ManagedElementDataId
1
autoConfigurationAllowed
true
autoConfigurationStatus
0 (IDLE)
daylightSavingTime
false
docLibSystemDefined
docLibUserDefined
documentServerAddress
hdVolumeCFreespace
658620416
JST, KST Standard
hdVolumeCSize
1203199488
time
logonServerAddress
minimumHdVolumeCFreespace
200
nodeLocalTimeZone
GMT
nodeUTCTime
1300866547000
nodeUniqueID
ENB02> ntpconfig info
ntpBurstFlagPrimary
true
ntpBurstFlagSecondary
false
ntpBurstFlagThird
false
$ ntpconfig info
ntpMaxPollPrimary
1024
Primary server: 10.0.0.19
ntpMaxPollSecondary
1024
No secondary server found
ntpMaxPollThird
1024
No tertiary server found
ntpMinPollPrimary
16
ntpMinPollSecondary
64
NTP synchronized
2011-03-23 08:48:59
ntpMinPollThird
64
NTP changed server
2011-03-23 08:32:11 10.0.0.19
ntpServerAddressPrimary
10.0.0.19
NTP clock stepped
2011-03-23 08:31:51 2011-03-23 08:31:51.127->2011-03-23 08:31:51.129 (src 10.0.0.19
ntpServerAddressSecondary
0.0.0.0
$
ntpServerAddressThird
0.0.0.0
ntpServiceActivePrimary
true
ntpServiceActiveSecondary
false
ntpServiceActiveThird
false
piuGroupEscalationType
4 (WARM_AT_PIU_RESTART)
swServerUrlList
===========================================================================
Total: 1 MOs
Laptop time
(2011.03.22 16:49:25)
ENB04> readclock
$ readclock
Date: 2011-03-23 UTC Time: 07:49:12. Wednesday
eNB time
(2011.03.23 07:49:12)
Check how many calls were made

ENB02> ue print -admitted
Command to check how many calls are in

operation

$ ue print -admitted
CellId #UE:s #Bearers
By default, when there is a call in UE 1,
31
2
2
Bearers display 1 as well.
32
2
2
33
1
1
ENB03> ue print -ue -allcell

$ ue print -ue -allcell
CellId RacUeRef BbUeRef
{traceRef,interfaces,traceDepth,ipAddress}
TypeOfActiveTrace
31
20
520100256 X
CRUT
31
23
520100416 X
CRUT
32
17
536877568 X
CRUT
32
19
536877728 X
CRUT
33
169
553654880 X
CRUT
$ /home/Administrator/moshell/commonjars/connect: connection timed out
$
SetByColi
false
false
false
false
false
CTSess
43711
43714
21863
21865
170
How to check bearer information

ENB02> appsh oper

$ appsh oper
egr_sid: ipIf | host |
ipDA
| dstPort | status
None found
0 UDP sessions in operational
egr_sid: laid |
ipDA
| teid | status
18
: 0 | 4.3.0.148 | 2487747802 | ok
21
: 0 | 4.2.0.150 | 3235900547 | ok
22
: 0 | 4.2.0.150 | 3620931837 | ok
23
: 0 | 4.2.0.150 | 988112966 | ok
24
: 0 | 4.2.0.150 | 2032833662 | ok
5 GTP sessions in operational
$
ENB02> appsh data 6
110318-20:05:42 10.0.0.163 8.0s ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/5752
$ appsh data 6
appsh data <{udp|gtp}> <sid>
ENB02> appsh data gtp 21
$ appsh data gtp 4
ipInterfaceIndex
=0
Check TEID in S1
hostIndex
=1
ipInterfaceIndex_old
=7
dedicated bearer
hostIndex_old
= 31
remoteIpAddress
= 4.2.0.150
receiveTEID
= 1671200888
dscp
= 20
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID
= 10
sessionId
=4
ENB02> appsh data gtp 22
$ appsh data gtp 5
ipInterfaceIndex
=0
hostIndex
=1
ipInterfaceIndex_old
=7
hostIndex_old
= 31
remoteIpAddress
= 4.2.0.150
receiveTEID
= 615576315
dscp
= 46
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID
= 10
sessionId
=5
side to distinguish default /
Handover
ENB02> get . term
Inter eNB connection information for X2

Handover

=================================================================================================================
MO
Attribute
Value
=================================================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1
ExchangeTerminalIpId 1
TermPointToMmeId LGERMME02
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 TermPointToENBId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 TermPointToENBId 4506-4
TermPointToMme=Samsung2
TermPointToMmeId Samsung2
TermPointToMmeId LGERMME01
TermPointToMmeId Samsung1
=================================================================================================================
Total: 7 MOs
ENB02> get . relation
Inter cell information for X2 Handover

=================================================================================================================
MO
Attribute
Value
=================================================================================================================
EUtranCellFDD=22,EUtranFreqRelation=3
EUtranFreqRelationId 3
=================================================================================================================
Total: 1 Mos
ENB02> get . external
eNB information for Handover

=================================================================================================================
MO
Attribute
Value
=================================================================================================================
HwUnit=SCU,AlarmPort=14
activeExternalAlarm false
EUtraNetwork=1,ExternalENodeBFunction=4506-3
ExternalENodeBFunctionId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ExternalEUtranCellFDDId 4506-3-31
EUtraNetwork=1,ExternalENodeBFunction=4506-4
ExternalENodeBFunctionId 4506-4
=================================================================================================================
Total: 24 MOs
Check IP Address, v-LAN id

ENB02> get . ipaddress
==========================================================================================
MO
Attribute
Value
==========================================================================================
Security=1
aAServerIPAddressList s[0] =
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressActive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressPassive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressActive 10.0.0.163
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressPassive 0.0.0.0
UpgradePackage=R20HN
ftpServerIpAddress 192.168.10.10
UpgradePackage=InitialUP
ftpServerIpAddress FTP_ServerIP_Address
UpgradePackage=CXP102051/10_R9BE/2
UpgradePackage=R9AS
Check O&M IP address
UpgradePackage=R7AK
Ip=1
nodeIpAddress
10.0.0.163
Ip=1,EthernetLink=1
ipAddress
169.254.1.10
Ip=1,IpHostLink=1
ipAddress
10.0.0.163
IpAccessHostEt=1
ipAddress
4.2.0.18
cachedIpAddress
ipAddress1
4.2.0.140
Check station IP address
ipAddress2
0.0.0.0
usedIpAddress
0.0.0.0
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 ipAddress
4.2.0.34
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 usedIpAddress
0.0.0.0
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 ipAddress
4.2.0.50
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 usedIpAddress
0.0.0.0
ipAddress1
4.3.0.140
ipAddress2
0.0.0.0
usedIpAddress
0.0.0.0
ipAddress1
4.2.0.132
ipAddress2
0.0.0.0
Check MME IP address
usedIpAddress
0.0.0.0
ipAddress1
4.3.0.132
ipAddress2
0.0.0.0
usedIpAddress
4.3.0.132
===========================================================================================
Total: 19 Mos
10.0.0.164> get . vid

===========================================================================================
MO
Attribute
Value
===========================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 vid
900
===========================================================================================
Total: 1 MOs
Checklist in case of failure

ENB03> cabr
====================================================================================================
Pos Date and Time
Domain
OS
Process
Errorcode
Cause (PMD ID)
====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC
0x00000003
Error log was cleared at last restart. Power on restart
0001 11-03-28 01:26:04 Processor BASIC Cs_boardManager_proc 0xB0AD0002
Board manager restart. Restart ordered by system manager
0001 11-03-28 01:26:12 Processor BASIC bmLoaderClientHelper 0xB0AD0001
Board manager restart. Mismatch of files in flash, goto backup
0001 11-03-28 01:26:48 Processor BACKUP bmLoaderClientHelper 0xB0AD0001
Board manager restart. Reset after backupmode
0001 11-03-28 01:27:40 Processor BASIC Cs_boardManager_proc 0xB0AD0006
Board manager restart. Restart ordered by system manager
---------------------------------------------------------------------------------------------------------------
ENB02> caba
=====================================================================================================
Pos Date and Time
Domain
OS
Process
Errorcode Cause (PMD ID)
=====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC
0x00000003 Error log was cleared at last restart. Power on restart
--------------------------------------------------------------------------------------------------------------$
Check VSWR
Check O&M IP address
ENB01> cabx
===============================================================================================
SMN APN PORT
BOARD
GREEN YELLOW RED
PRODUCT NR
REV
DATE
SERIAL NR
===============================================================================================
0 1 BXP_0_1
RUS01B5
steady 16hz off
KRC11864/2
R1C
20100923
C823763459
0 1 BXP_3_1
RUS01B5
steady 16hz off
KRC11864/2
R1C
20101103
C823863797
-------------------------------------------------------------------------------------------------------------------------------ENB01> lhsh BXP_3_1 fui get vswr
110110-18:33:56 10.0.0.162 8.0n ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/5096
$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
ENB01> cabx
============================================================================================================
====================
SMN APN PORT
BOARD
GREEN YELLOW RED
PRODUCT NR
REV
DATE
SERIAL NR
============================================================================================================
====================
0 1 BXP_0_1
RUS01B5
steady 16hz off
KRC11864/2
R1C
20100923
C823763459
0 1 BXP_3_1
RUS01B5
steady 16hz off
KRC11864/2
R1C
20101103
C823863797
-------------------------------------------------------------------------------------------------------------------------------ENB01> lhsh BXP_4_1 fui get vswr
$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
Check current output
ENB02> cabx
==============================================================================================
SMN APN PORT
BOARD
GREEN YELLOW RED
PRODUCT NR
REV
DATE
SERIAL NR
=============================================================================================
0 1 BXP_2_1
RUS01B5
steady off
off
KRC11864/2
R1C
20101103
C82386378 5
0 1 BXP_5_1
RUS01B5
steady off
off
KRC11864/2
R1C
20100913
C82373890 0
-------------------------------------------------------------------------------------------------------------------------------ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C0
$ lhsh BXP_2_1 warpA read DL_PM_PA0_C0
Value 0x002DE4FF (3007743) read from address 0x00000B8F.
$
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C1

Value 0x003BB172 (3912050) read from address 0x00000B90.
$
If there is a value here, you

can see there is TX output.

Value 0x003888B1 (3705009) read from address 0x00000B91.
$
Value 0x002E0F80 (3018624) read from address 0x00000B92.
Provide accurate output value

a.
b.
c.
d.
p_c0 = p_reg_c0*(2^14)/(15*81920) = p_reg_c0 * 16384 / 1228800

p_c1 = p_reg_c1*(2^14)/(15*81920) = p_reg_c1 * 16384 / 1228800
p_c2 = p_reg_c2*(2^14)/(15*81920) = p_reg_c2 * 16384 / 1228800
p_c3 = p_reg_c3*(2^14)/(15*81920) = p_reg_c3 * 16384 / 1228800
Total = p_c0 + p_c1 + p_c2 + p_c3
(Total / 2914^2) * 60 W
Check output target

ENB04> get . power
Use when you check

output value

============================================================================================
MO
Attribute
Value
============================================================================================
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt CapacityOutputPowerId 60Watt
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt capacityUnitOutputPower Number of 60 Watt Licenses
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt keyIdOutputPower CXC4010626
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseCapacityOutputPower 6
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseStateOutputPower 1 (ENABLED)
HwUnit=SAU
powerDistrFaultIndicator 1 (NOT_AVAILABLE)
Subrack=1
maxPowerDissipation -1
Subrack=1
powerMeasurements Struct{5}
>>> 1.currentLeft = -1
>>> 2.currentRight = -1
>>> 3.distributedPower = 0
>>> 4.voltageLeft = -1
>>> 5.voltageRight = -1
HwUnit=PDU-1
HwUnit=SCU
SubrackProdType=ROJ999999_*
maxPowerDissipation 0
HwUnit=PDU-2
EUtranCellFDD=43
maximumTransmissionPower 437
EUtranCellFDD=43
partOfRadioPower 60
EUtranCellFDD=43
partOfSectorPower 60
confOutputPower 40
sectorPower
0
PowerSupply=1
PowerSupplyId
1
PowerDistribution=1
PowerDistributionId 1
=============================================================================================
Total: 16 MOs
How to change station output

ENB03> get . power
ENB03> set EUtranCellFDD=43 partOfRadioPower 20 ( Command that modify from 60% of 43.7dBm to 20%.
ENB03> st cell
ENB03> bl cell
ENB03> deb cell
Check Security
ENB04> pr security
Check whether Security should be used during handset

connection to RRC.

===================================================================================
Proxy MO
===================================================================================
57 SystemFunctions=1,Security=1
962 ENodeBFunction=1,SecurityHandling=1
===================================================================================
Total: 2 MOs
ENB04> get 962
Enter get 962 (value confirmed in the above) to check detailed

information.

============================================================================================
962
ENodeBFunction=1,SecurityHandling=1
===========================================================================================
SecurityHandlingId
1
cipheringAlgorithms
14 (EEA0)
countWrapSupervisionActive
true
True: Use Security during RRC connection.
integrityProtectionAlgorithms
8 (EIA2)
False: Do not use security during RRC connection.
rbIdSupervisionActive
false
============================================================================================
Total: 1 MOs
ENB04>
Check System constant
dont open to customer
ENB04> parsemom moshell/jarxml/
ERBS_NODE_MODEL_A_9_2.xml.cache.gz*
ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.gz*
jacoms.jar*
ERBS_NODE_MODEL_A_9_2.xml.gz*
ERBS_NODE_MODEL_B_1_40.xml.cache.gz
jacorb.jar*
ERBS_NODE_MODEL_A_9_53.xml.cache.gz*
ERBS_NODE_MODEL_B_1_40.xml.gz
lmids.txt
ERBS_NODE_MODEL_A_9_53.xml.gz*
ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz* lmids.txt.old2.gz*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.cache.gz ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz*
moshellrc*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.gz*
MGW_R2.xml.cache.gz
moshellrc.bak*
ERBS_NODE_MODEL_B_1_30.xml.cache.gz
MGW_R2.xml.gz*
updata.txt*
ERBS_NODE_MODEL_B_1_30.xml.gz
cppdata.txt
uptomom.txt
ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.cache.gz* event/
ENB04> parsemom moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz
Parsing MOM: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz .................................Done.

Caching MOM to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache .....Done.
Compressing to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ...Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
ENB04> get systemc
Complete mom is changed at the time of version upgrade,

and it needs constant upgrade.

=================================================================================================
964
ENodeBFunction=1,SystemConstants=1
=================================================================================================
SystemConstantsId
1
systConstants
38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
=================================================================================================
1036
SupportSystemConfiguration=1
==================================================================================================
SupportSystemConfigurationId
1
==================================================================================================
Total: 2 MOs
ENB04>
1. Put Complete mom file in C:\cygwin\home\Administrator\moshell\jarxml.

2. Enter command ( parsemom moshell/jarxml/ ) and select tab key to display Complete mom in the folder.
3. Drag and paste, then select Enter.
4. Able to check system constant status at the time of entering get systemc.
TM(Transmission mode) check and set ANT

number
TM (Transmission Mode) : Set transmission
mode.
3: MIMO
2: SIMO
1: SISO
ENB02> get systemc

============================================================================
1102
============================================================================
SystemConstantsId
1
systConstants
38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
============================================================================
1166
============================================================================
1
============================================================================
Total: 2 Mos
eNB3> get . antenna
Numbur of TX ANT is currently 1

To check RX ANT number: get . noofrx
SISO/SIMO:

==============================================================================
MO
Attribute
Value
==============================================================================
AntennaUnitGroup=1
AntennaUnitGroupId 1
AntennaUnitGroup=1,AntennaUnit=1
AntennaUnitId
1
AntennaUnitGroup=1,AntennaUnit=1
mechanicalAntennaTilt 0
EUtranCellFDD=31
noOfRxAntennas 2
EUtranCellFDD=31
noOfTxAntennas 2
EUtranCellFDD=31
noOfUsedTxAntennas 2
=============================================================================
Total: 3 MOs
ENB02> get . nooftx
Set system constant value as 125:1

Set Tx Ant number as 1
=============================================================================
MO
Attribute
Value
EUtranCellFDD=21 noOfTxAntennas 1
=============================================================================
EUtranCellFDD=21 noOfRxAntennas 1
EUtranCellFDD=21
noOfTxAntennas 1
Transmit Diversity
EUtranCellFDD=22
noOfTxAntennas 1
Set system constant value as 125:2
EUtranCellFDD=23
noOfTxAntennas 1
=============================================================================
Total: 3 MOs
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
SM
Set system constant value as 125:3 // Operate as Transmit Diversity or SM(Large CDD), according to channel environment
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
TM(Transmission mode)
Check and set ANT
number
ENB04> get systemc

======================================================================================================
746
======================================================================================================
SystemConstantsId
1
systConstants
======================================================================================================
776
======================================================================================================
1
======================================================================================================
Total: 2 MOs
ENB04> acl systemc

======================================================================================================
Proxy MO
Action
Nr of Params
======================================================================================================
746 SystemConstants=1
resetSystConst
1
writeSystConst
2
776 SupportSystemConfiguration=1
configureSupportSystem
1
======================================================================================================
ENB04> acc 746 writeSystConst

Call Action writesystconst on following 1 MOs ?
===================================================================================
746 ENodeBFunction=1,SystemConstants=1
===================================================================================
Call action writesystconst on 1 MOs. Are you Sure [y/n] ? y
======================================================================================================
Proxy MO
Action
Nr of Params
======================================================================================================
writeSystConst
2
Parameter 1 of 2, name (string): 125

Parameter 2 of 2, value (string): 3
======================================================================================================
Configure
ANR
ENB04> pr anr
===================================================================================
Proxy MO
===================================================================================
29 SystemFunctions=1,Licensing=1,OptionalFeatures=1,Anr=1
973 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigEUtraBestCell=1,ReportConfigEUtraBestCellAnr=1
978 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigA5=1,ReportConfigA5Anr=1
1006 ENodeBFunction=1,AnrFunction=1
1007 ENodeBFunction=1,AnrFunction=1,AnrFunctionGeran=1
1008 ENodeBFunction=1,AnrFunction=1,AnrFunctionUtran=1
1009 ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
===================================================================================
Total: 11 MOs
ENB04> get ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
=================================================================================================================
1009
ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
=================================================================================================================
AnrFunctionEUtranId
1
anrInterFreqState
0 (DEACTIVATED)
anrIntraFreqState
1 (ACTIVATED)
anrUesEUtraIntraFDecr
10
anrUesEUtraIntraFIncrAnr
20
anrUesEUtraIntraFIncrHo
100
anrUesEUtraIntraFMax
20
anrUesEUtraIntraFMin
1
anrUesThreshInterFDecr
10
anrUesThreshInterFIncrAnr
20
anrUesThreshInterFIncrHo
100
anrUesThreshInterFMax
20
anrUesThreshInterFMin
1
cellAddRsrpThresholdEutran
-1440
cellAddRsrqThresholdEutran
-1920
hoAllowedEutranPolicy
true
x2SetupPolicy
true
=================================================================================================================
Total: 1 MOs
ENB04> mom . cellAddRsrpThresholdEutran
####################################################################################################################################
MO Class
Attribute
Type
Flags
####################################################################################################################################
AnrFunction
long
deprecated
-----------------------------------------------------------------------------------------------------------------------------------Deprecated: Since L11B. Replaced by AnrFunctionEUtran::cellAddRsrpThresholdEutran.
Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
AnrFunctionEUtran
long
-----------------------------------------------------------------------------------------------------------------------------------Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
Manage and apply License

How to enter Fingerprint
ENB03> license server
$ license server
License Server
: 000101d4
Latest PV
:3
License Key File
: Installed, Mon Mar 14 14:19:58 2011
Sequence Number
: 1008
New Sequence Number
Node Identity State
:1
must be bigger than
Unique Logical Name
: eNB3
existing value.
Validation Start
: Sat Mar 26 13:17:56 2011
Validation Interval
: 1 Day
Emergency Status
: Deactivated
Emergency State
:2
Emergency Counter
:1
Emergency State Time
: Tue Mar 8 09:56:59 2011
Emergency Time Limit
: 7 Days
$
ENB03> get . fingerprint

=========================================================================
MO
Attribute
Value
=========================================================================
Licensing=1
fingerprint
eNB3
=========================================================================
Total: 1 MOs
169.254.1.10> acc RbsConfiguration=1 setUniqueLogicalName

stopfile=/tmp/2748
Call Action setuniquelogicalname on following 1 MOs ?
================================================
776 ENodeBFunction=1,RbsConfiguration=1
================================================
Call action setuniquelogicalname on 1 MOs. Are you Sure [y/n] ? y
================================================
Proxy MO
Action
Nr of Params
================================================
776 RbsConfiguration=1
setUniqueLogicalName
1
Parameter 1 of 1, uniqueLogicalName (string): eNB1
!!! Exception failure: org.omg.CORBA.COMM_FAILURE:
code: 0 completed: Maybe
vmcid: 0x0 minor
================================================
4.7.1 Problem Description

License keys are required in combination with any given enabled feature in order to allow full access to a feature.
The following Command Line Interface (COLI) command printouts must be taken from DUL if they are not already collected:
- license server (License Server details)
- license client (License Client details)
- License sub a (Feature status information)
- license lkf (Status of license key file)
- license key (License key information)
All files in the /c/license/ directory must be transferred by FTP, binary mode, from the node.
Save the output in an attachment called license_files.zip
Manage and apply License

1.
Upload license file(.xml) to FTP
2.
Enter nmsadm if file to OSS-RCs UAS(10.0.0.19) (Use FTP,

ID ; nmsadm, PW: nms275)
2.
Put the file into My Computer (169.254.1.12) (Use FTP, ID:

lte, pw: lte
3.
Follow MOshell command procedure.
ENB03>
acl 6

==========================================================================
Proxy MO
Action
Nr of Params
==========================================================================
6 Licensing=1
setEmergencyState
0
6 Licensing=1
updateLicenseKeyFile
4
==========================================================================
ENB04> acc 6 updateLicenseKeyFile

Call Action updatelicensekeyfile on following 1 MOs ?
==========================================================================
6 SystemFunctions=1,Licensing=1
==========================================================================
Call action updatelicensekeyfile on 1 MOs. Are you Sure [y/n] ? y
==========================================================================
Proxy MO
Action
Nr of Params
==========================================================================
6 Licensing=1
updateLicenseKeyFile
4
Parameter 1 of 4, userId (string): lte

Parameter 2 of 4, password (string): lte
Parameter 3 of 4, ipAddress (string): 169.254.1.12
Parameter 4 of 4, sFile (string): eNB4_101224_004441.xml
==========================================================================
Check with these commands if there is

any error after applying License.
ENB02> inv
==========================================================================
Feature
keyId
licenseState
featureState
serviceState
description
==========================================================================
AgpsSupl=1
AirIfLoadGenerator=1
169.254.1.10> license lkf

$ license lkf
License Key File Status : 2 (LKF_ERROR)
Additional Info
: Faulty fingerprint in the license key file.
$
Check ping
ENB03> get . ipadd
ENB03> acc ipoam ping

Call Action ping on following 1 MOs ?
================================================================
=====================================================================
662 IpOam=1
MO
Attribute
Value
================================================================
=====================================================================
Call action ping on 1 MOs. Are you Sure [y/n] ? y
UpgradePackage=R9AS
UpgradePackage=R9BE%2
=================================================================
Ip=1
nodeIpAddress
10.0.0.164
Proxy MO
Action
Nr of Params
Ip=1,EthernetLink=1
ipAddress
169.254.1.10
===================================================================
Ip=1,IpHostLink=1
ipAddress
10.0.0.164
662 IpOam=1
ping
1
IpAccessHostEt=1
ipAddress
4.2.0.34
cachedIpAddress
Parameter 1 of 1, host (string): 10.0.0.19
>>> Return value = no answer from * / 10.0.0.19
ENodeBFunction=1
ipAddress
4.2.0.34
ENodeBFunction=1
x2IpAddrViaS1Active true
===================================================================
ipAddress1
4.2.0.140
ipAddress2
0.0.0.0
usedIpAddress
4.2.0.140
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 ipAddress
4.2.0.18
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 usedIpAddress
ipAddress1
4.2.0.132
ipAddress2
0.0.0.0
usedIpAddress
0.0.0.0
=====================================================================
Total: 20 MOs
ENB03> acc IpAccessHostEt ping

Call Action ping on following 1 MOs ?
=====================================================================
721 IpSystem=1,IpAccessHostEt=1
=====================================================================
Call action ping on 1 MOs. Are you Sure [y/n] ? y
=====================================================================
Proxy MO
Action
Nr of Params
=====================================================================
721 IpAccessHostEt=1
ping
1
>>> Return value = 4.2.0.35 no answer
When ping comes back normally:

>>> Return value = 4.3.0.18 is alive
======================================================================
Statistics DATA
pm_data Statisticsdata is
accumulated in pm_date of station,
O&M Server calls every 15 minutes.
Statistics DATA
Current Statistics status
Check entire MO for Statistics
ENB03> pmom
stopfile=/tmp/5100
#######################################################################
MO Class
Pm Counters
#######################################################################
CapacityConnectedUsers 5
pmLicConnectedUsersActual
pmLicConnectedUsersDistr [24]
pmLicConnectedUsersHardLimit
pmLicConnectedUsersLicense
pmLicConnectedUsersTimeCong
---------------------------------------------------------------------------------Cpu
1
pmProcessorLoadDistr [11] (deprecated)
---------------------------------------------------------------------------------DlBasebandCapacity
4
pmLicDlCapActual
pmLicDlCapDistr [20]
pmLicDlCapLicense
pmLicDlCapMax (deprecated)
---------------------------------------------------------------------------------DlPrbCapacity
3
pmLicDlPrbCapActual
pmLicDlPrbCapDistr [20]
pmLicDlPrbCapLicense
---------------------------------------------------------------------------------ENodeBFunction
3
pmHwUtilDl [20]
pmHwUtilUl [20]
pmPdcpPktDiscDlEth
---------------------------------------------------------------------------------EUtranCellFDD
290
pmActiveDrbDlSum
pmActiveDrbUlSum
pmActiveUeDlMax
pmActiveUeDlSum
pmActiveUeUlMax
pmActiveUeUlSum
pmAnrNeighbrelAdd
pmAnrNeighbrelRem
pmBadCovEvalReport
pmBestCellEvalReport
pmCellDownLockAuto
pmCellDownLockMan
ENB03> pst
Connecting to 10.0.0.164:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_23, jacoms=
Trying file=C:/cygwin/home/Administrator/moshell_logfiles/logs_moshell/tempfiles/2011036
**** Bootstrapping OK
****
$pmtester_pid = 584
=============================================================
PROXY SCANNER-NAME
STATE
=============================================================
1 PREDEF.STATS
ACTIVE
16 USERDEF.ENB03-stat.Profile=5000073.Continuous=Y.STATS
ACTIVE
30 USERDEF.Scanner_Coming_Pck.Profile=5000071.Continuous=Y.STATS ACTIVE
31 PREDEF.10000.CELLTRACE
SUSPENDED
SUSPENDED
SUSPENDED
SUSPENDED
SUSPENDED
SUSPENDED
=============================================================
>>> Total: 9 Scanners
ENB03> pgets 1
Use when you check what kind of statistics

data is being collected

=============================================================
1
PREDEF.STATS
ACTIVE
900 156
==============================================================
EUtranCellFDD
40 pmSessionTimeDrb
pmS1SigConnEstabAtt
pmS1SigConnEstabSucc
pmSessionTimeUe
pmUeCtxtRelAbnormalEnbAct
pmPrbAvailUl
pmPrbUsedDl (deprecated)
pmPrbUsedUl (deprecated)
pmRrcConnEstabAtt
pmRrcConnEstabFailLic
EUtranCellRelation
4 pmHoPrepSuccLteIntraF
pmHoPrepAttLteIntraF
pmHoExeSuccLteIntraF
pmHoExeAttLteIntraF
CapacityConnectedUsers
28 pmLicConnectedUsersDistr [24]
pmLicConnectedUsersLicense
pmLicConnectedUsersHardLimit
pmLicConnectedUsersTimeCong
pmerablevsamp : Increase by 1 every 5 seconds when you check number of Erabs.

( 15*12 = 180)
pmErabLevSum : Counter number of Erabs every 5 seconds to have SUM for 15 minutes.
Statistics DATA
ENB03> pget . pmerablevsamp
pget : Show statistics updated every second,

cleared in 15 minutes.

=================================================================================================================
MO
Attribute
Value
hpget : Show vertically. pget : Show horizontally.
=================================================================================================================
EUtranCellFDD=33
pmErabLevSamp
0
EUtranCellFDD=32
pmErabLevSamp
0
EUtranCellFDD=31
pmErabLevSamp
0
=================================================================================================================
Total: 3 MOs
ENB03> pmx . pmerablevsamp
.........................
. pmx : Show Statistics date collected during past

15 minutes.
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110325.0900-0915.1.xml.gz | /home/Administrator/moshell/pmExtract -u "."

"pmerablevsamp" | /home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Report from 2011-03-25 09:00 UTC to 2011-03-25 09:14 UTC
Date: 2011-03-25
Object
EUtranCellFDD=31
EUtranCellFDD=32
EUtranCellFDD=33
Counter
09:00
pmErabLevSamp 180
pmErabLevSamp 180
pmErabLevSamp 180
ENB03> pmx . pmerablevsamp -s 20110324.1000 -e 20110324.1100
Assign time to pmx to check Statistics Data

Case 1 [-s : designate start time. e: designate end
.........................
time]
get /c/pm_data/A20110324.1000-1015:1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1000-1015.1.xml.gz
... OK
Case 2 [-m 1(contents over the past one hour)
... OK
... OK
a(combined)]
get /c/pm_data/A20110324.1045-1100:1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1045-1100.1.xml.gz ... OK
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1000-1015.1.xml.gz /home/Administrator/moshell_logfiles/logs_
moshell/pmfiles/10.0.0.164/pm_data/A20110324.1015-1030.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.10301045.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1045-1100.1.xml.gz | /home/Administrator/moshell/pmExtract
-u "." "pmerablevsamp" | /home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-24
Object
EUtranCellFDD=31
EUtranCellFDD=32
EUtranCellFDD=33
Counter
10:00 10:15 10:30 10:45
pmErabLevSamp
93 113
0
0
pmErabLevSamp
82
0
0
0
pmErabLevSamp
0
65
180 180
Statistics DATA
pmSessionTimeUe : Increase by 1 every 5 seconds when you check number of Erabs.
ENB03> hpget . pmSessionTimeUe
hpget : Show statistics updated every second,

cleared in 15 minutes.

.
hpget : Show vertically. pget : Show horizontally.
=================================================================================================================
MO
pmSessionTimeUe
=================================================================================================================
EUtranCellFDD=33 0
EUtranCellFDD=32 2
EUtranCellFDD=31 0
=================================================================================================================
Total: 3 MOs
Added 3 MOs to group: hget_group
Total: 0 MOs
ENB03> pmx . pmSessionTimeUe

.........................
pmx : Show Statistics date collected during past 15

minutes.
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0030-0045.1.xml.gz | /home/Administrator/moshell/pmExtract -u "xt -m

(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
Object
Counter
00:30
EUtranCellFDD=31 pmSessionTimeUe
0
161
0
ENB03> pmx . pmSessionTimeUe -m 1 -a
Assign time to pmx to check Statistics Data

.........................
Case 1 [-s : designate start time. e: designate end

time]
Case
2 [-m 1(contents over the past one hour)
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110327.2345-0000.1.xml.gz
/home/Administrator/moshell_logfiles/logs_moshell/pmfiles
/10.0.0.164/pm_data/A20110328.0000-0015.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0015-0030.1.xml.gz
/home/Administ
a(combined)]
rator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0030-0045.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmSessionTimeUe"
nistrator/moshell/pmXtab -a -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Start Time: 2011-03-27 23:45:00 End Time: 2011-03-28 00:30:00
Object
Counter
0
161
0
| /home/Admi
Statistics DATA ( no. of rach tried calls, cell status) hpget: Classified as horizontal pget: Classified as vertical
ENB04> hpget fdd cbra

.
===================================================================================================
MO
pmRaAttCbra
pmRaFailCbraMsg2Disc pmRaSuccCbra
===================================================================================================
Tried Contention base rach access three
EUtranCellFDD=41
0
0
0
times and succeeded three time, middle
EUtranCellFDD=43
3
-2
3
EUtranCellFDD=42
0
0
0
value can be disregarded
===================================================================================================
Total: 3 MOs
Added 3 MOs to group: hget_group
Total: 0 Mos
ENB04> pget fdd celldown

=====================================================================================================
MO
Attribute
Value
=====================================================================================================
EUtranCellFDD=41
pmCellDownLockAuto 0
EUtranCellFDD=41
pmCellDownLockMan 0
EUtranCellFDD=41
pmCellDownUnlockMan 0
EUtranCellFDD=41
pmCellDowntimeAuto 0
Counter every 1 sec after Cell is down.
EUtranCellFDD=41
pmCellDowntimeMan 292
EUtranCellFDD=43
EUtranCellFDD=43
pmCellDownLockMan 0
EUtranCellFDD=43
EUtranCellFDD=43
EUtranCellFDD=43
pmCellDowntimeMan 0
EUtranCellFDD=42
EUtranCellFDD=42
pmCellDownLockMan 0
EUtranCellFDD=42
EUtranCellFDD=42
EUtranCellFDD=42
pmCellDowntimeMan 292
===================================================================================================
Total: 3 MOs
hpget fdd pmRrcConnEstabAtt
Statistics DATA KPI
> hpget fdd pmRaAttCbra

LTE
eNB
UE
UE
hpget fdd pmRrcConnEstabSucc

MME
MME
Femto
hpget fdd pmS1SigConnEstabAtt
S1 Setup Response
RRC Connection Request
RRC Connection Setup Complete
PGW
Server
S1 Setup Request
RRC Connection Setup
FTP
AGW
SGW
DL Information Transfer
DL NAS Transport (Auth.Req)
UL Information Transfer
UL NAS Transport (Auth.Rsp)
Initial E-RAB Establishment Success Rate
HSS
pmRrcConnEstabSucc / pmRrcConnEstabAtt x
pmS1SigConnEstabSucc / pmS1SigConnEstabAtt x
pmErabEstabSuccInit / pmErabEstabAttInit x
Authentication Data Request (IMSI, ..)

Authentication Response
(Authentication Vector KASME, RAND, XRES, AUTN)
DL NAS Transport (Security Mode Command)
UL NAS Transport (Security Mode Complete)
Added E-RAB Establishment Success Rate

pmErabEstabSuccInit / pmErabEstabAttAdded
Update Location Request
In case of multi bear
Update Location Ack.
Security Mode Command
Initial Context Setup Req.

(Attach Accept with Activate Default Bearer Req)
Create Session Req.
Create Session Req.
Create Session Rsp.
Create Session Rsp.
Establish IP-CAN Session
hpget fdd pmErabEstabAttInit

hpget fdd pmErabEstabAttAdded
Security Mode Complete

RRC Connection Reconfiguration
RRC Connection Reconfiguration Complete
Initial Context Setup Response
Server
EUTRAN ACCESSIBILITY
hpget fdd pmS1SigConnEstabSucc

Initial UE Req
(Attach Req with PDN Conn. Req)
FTP
PCRF
hpget fdd pmErabEstabSuccInit

hpget fdd pmErabEstabSuccAdded
UL NAS Transport
(Attach Complete with Activate Default Bearer Accept)
Modify Bearer Request (eNB TEID)
Modify Bearer Response
hpget fdd pmSessionTimeUe

Packet Traffic
Release By RBS
Release By MME
hpget fdd pmErabRelMme
hpget fdd pmUeCtxtRelMme
UE CONTEXT RELEASE REQUESTE

E-RAB RELEASE COMMAND
Includes a list of E-RABs to be released
UE CONTEXT RELEASE COMPLETE
hpget fdd pmErabRelNormalEnb

hpget fdd pmUeCtxtRelNormalEnb
hpget fdd pmErabRelAbnormalEnb
hpget fdd pmErabRelMmeAct
hpget fdd pmUeCtxtRelAbnormalEnb
hpget fdd pmUeCtxtRelMmeAct
hpget fdd pmErabRelAbnormalEnbAct

hpget fdd pmUeCtxtRelAbnormalEnbAct
EUTRAN RETAINABILITY
E-RAB Release Rate [drops/s]
( pmErabRelAbnormalEnbAct + pmErabRelMmeAct )
/ pmSessionTimeUe
Statistics DATA KPI

LTE
eNB
UE
UE
MME
MME
Femto
FTP
AGW
SGW
FTP
PGW
PCRF
Server
S1 Setup Request
Server
EUTRAN INTEGRITY
S1 Setup Response
RRC Connection Request
RRC Connection Setup
RRC Connection Setup Complete
HSS
Initial UE Req
(Attach Req with PDN Conn. Req)
DL NAS Transport (Auth.Req)
UL NAS Transport (Auth.Rsp)
DL NAS Transport (Security Mode Command)
UL NAS Transport (Security Mode Complete)
Authentication Data Request (IMSI, ..)

Authentication Response
(Authentication Vector KASME, RAND, XRES, AUTN)
Downlink DRB Throughput [kbps]

( pmPdcpVolDlDrb - pmPdcpVolDlDrbLastTTI )/
( pmUeThpTimeDl/1000 )
Uplink DRB Throughput [kbps]

( pmPdcpVolUlDrb - pmPdcpVolUlDrbLastTTI )/
( pmUeThpTimeUl/1000 )
Update Location Request

Update Location Ack.
Security Mode Command
Initial Context Setup Req.

(Attach Accept with Activate Default Bearer Req)
Create Session Req.
Create Session Rsp.
Create Session Rsp.
Uplink DRB Traffic Counters
Security Mode Complete

RRC Connection Reconfiguration
RRC Connection Reconfiguration Complete
Initial Context Setup Response
Create Session Req.
Establish IP-CAN Session
Downlink DRB Traffic Counters
pmPdcpVolUlDrb
pmPdcpVolDlDrb
pmPdcpVolUlDrbLastTTI
pmPdcpVolDlDrbLastTTI
pmUeThpTimeUl
UL NAS Transport
(Attach Complete with Activate Default Bearer Accept)
pmUeThpTimeDl
pmPdcpLatTimeDl
pmPdcpLatPktTransDl
Packet Traffic
EUTRAN Packet Loss KPIs

Downlink Packet Error Loss Rate [%]
EUTRAN Latency KPIs
Downlink DRB Latency [ms]
pmPdcpLatTimeDl / pmPdcpLatPktTransDl
{(pmPdcpPktDiscDlPelr + pmPdcpPktDiscDlHo + pmPdcpPktDiscDlPelrUu ) /

( pmPdcpPktDiscDlPelr + pmPdcpPktDiscDlHo +pmPdcpPktDiscDlPelrUu +pmPdcpPktTransDl )} x 100
Uplink Packet Error Loss Rate [%]

{ pmPdcpPktLostUl / (pmPdcpPktLostUl + pmPdcpPktLostUl ) } )} x 100
hpget fdd pmHoPrepAttLteIntraF
Statistics DATA KPI
hpget fdd pmHoPrepSuccLteIntraF
Source
eNB
UE
RRC Measurement Report

( Event A3)
Target
eNB
MME
AGW
HSS
PCRF
RRC CONNECTION RECONFIGURATION
Handover Required
Handover Request
hpget fdd pmHoExeAttLteIntraF
Handover Request Ack
hpget fdd pmHoExeSuccLteInterF
Create Indirect data forwarding Tunnel

Handover Command
UE CONTEXT RELEASE
EUTRAN Mobility
EUTRAN Mobility Success Rate [%]
RRC Conn. Reconf Req.
( pmHoPrepAttLteInterF / pmHoPrepSuccLteInterF ) X
( pmHoExeAttLteInterF / pmHoExeSuccLteInterF ) X 100
eNB Status Transfer

eNB Status Transfer
RRC Conn. Reconf Rsp.
Handover Notify
Modi Bearer Req
Modi Bearer Resp.
Tracking Area Update

UE Context Release Command
UE Context Release Complete
Delete Indirect data forwarding Tunnel
< Dedicated Bearer Allocation requested by Network>
Statistics DATA KPI
ENB03> pmx . pmCellDowntimeAuto

.........................
get /c/pm_data/A20110328.0445-0500:1.xml.gz
/home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.04450500.1.xml.gz ... OK
Count every second when Celli

s automatically blocked.
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.04450500.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmCellDowntimeAuto" |

/home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
Object
Counter
04:45
EUtranCellFDD=31 pmCellDowntimeAuto
0
0
0
Count every second when Cell is

blocked by Operator.
ENB03> pmx . pmCellDowntimeMan

.........................
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.04450500.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmCellDowntimeMan" |
/home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
Object
Counter
04:45
EUtranCellFDD=31 pmCellDowntimeMan
ENB03> pmom . pmCellDowntimeMan
EUTRAN
Cell Availability
Cell Availability
[%] KPI
0
900
0
When you are not sure about

statistics mo, you can enter
pmom..target mo) to see the
description.
{ ( N X M X 900 - (pmCellDowntimeAuto - pmCellDowntimeMan )) /

(N X M X 900) } X 100
N : Reported count (4 times per hour)
M : Number of cells detected
Statistics DATA
ENB03> pget IP udp

=================================================================================================
MO
Attribute
Value
=================================================================================================
IpAccessHostEt=1
pmUdpInDatagrams 11666
IpAccessHostEt=1
pmUdpInErrors
0
IpAccessHostEt=1
pmUdpNoPorts
-2
IpAccessHostEt=1
pmUdpOutDatagrams 1410
=================================================================================================
Total: 1 MOs
ENB03> pmom . pmUdpOutDatagrams
###################################################################################################################
MO Class
Pm Counter
Type
Flags
####################################################################################################################
IpAccessHostEt
pmUdpOutDatagrams
long
PEG,ropReset
------------------------------------------------------------------------------------------------------------------------------------
Inactivity timer
ENB03> get . inac

===========================================================================
MO
Attribute
Value
===========================================================================
ConfigurationVersion=1
currentMainActivity 0 (IDLE)
Rcs=1
tInactivityTimer 0
===========================================================================
Total: 2 MOs
ENB02> set Rcs=1 tInactivityTimer 120
Set tInactivityTimer on following 1 MOs ?
============================================================================
794 ENodeBFunction=1,Rcs=1
============================================================================
!! Warning: the new value is not according to recommended value !!
New value = 120, Recommended value = 61
Set tInactivityTimer on 1 MOs. Are you Sure [y/n] ? y
============================================================================
Id MO
tInactivityTimer
Result
============================================================================
794 Rcs=1
120
>>> Set.
============================================================================
Total: 1 MOs attempted, 1 MOs set
ENB02>
Check Upgrade
ENB03> get upgr stat

===================================================================================
MO
Attribute
Value
===================================================================================
UpgradePackage=Virtual_1_of_CXP102051/12_R7AK
state
4 (ONLY_DELETEABLE)
UpgradePackage=Virtual_2_of_CXP102051/10_R5EA
state
4 (ONLY_DELETEABLE)
UpgradePackage=Virtual_0_of_CXP102051/12_R8AA
state
4 (ONLY_DELETEABLE)
UpgradePackage=InitialUP
state
4 (ONLY_DELETEABLE)
UpgradePackage=R9AS
state
7 (UPGRADE_COMPLETED)
UpgradePackage=R9BE%2
state
7 (UPGRADE_COMPLETED)
====================================================================================
Total: 6 Mos
ENB03> pr upgrade
===================================================================================
Proxy MO
===================================================================================
105 SwManagement=1,UpgradeTrace=1
129 SwManagement=1,Repertoire=CPP_Int_Tran_Upgrade_2
184 SwManagement=1,UpgradePackage=InitialUP
223 SwManagement=1,Repertoire=CPP_Control_Upgrade_4
261 SwManagement=1,UpgradePackage=R9BE%2
339 SwManagement=1,Repertoire=CPP_IP_Tran_Upgrade_4
===================================================================================
Total: 6 MOs
Change Directory in AMOS

ENB03> cd /c/
$ cd /c/
ENB03> ls
$ ls
Directory '/c/'
configuration
java
license
loadmodules
loadmodules_norepl
node_id
public_html
security
systemfiles
tmp
up
logfiles
pm_data
pmd
usr
pi_data
ENB03> cd /d/
$ cd /d/
ENB03> ls
$ ls
Directory '/d/'
configuration
loadmodules
systemfiles
usr
cv.bak
cv.ptr
rollbacklst.bak
rollback.ini
rollback.lst
nss_tum_data
IPsecTrustedCerts
ftp
ran4_ETM32_10MHz.cfg
ran4_ETM33_10MHz.cfg
$

Moshell (Basic Command) - v1.0

Uploaded by

Copyright:

Available Formats

Moshell (Basic Command) - v1.0

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Moshell (Basic Command) - v1.0

Uploaded by

Copyright:

Available Formats

22. get . ipaddress , get . vid (IP Address VLAN ID )

moshell 169.254.1.10 , lt all (RBS )

23. cabr , caba ( )

cvcu, cvls, cvset, cvrm, cvmk (cv )

24. cabx , lhsh BXP_3_1 fui get vswr ( VSWR )

acc 0 manualrestart (Restart RBS )

25. cabx , lhsh BXP_0_1 warpA read DL_PM_PA0_C0

st mme , st fdd , get mme ipaddress

st cell , bl , deb ( Cell Block, Unblock )

27. pr security ( Security )

pr AntennaUnit , lpr RfBranch, stde , st riport ( RU )

28. get systemc ( System constant : customer )

diff (Compare MO)

29. get . nooftx , noofrx ( ANT )

al , ala , alt ( Alarm Check )

30. pr anr ( ANR )

26. get . Power ( )

10. lga , lgx, lg ( alarm log log )

31. license server , get . fingerprint (License )

11. get . tac ( tac )

32. acc IpAccessHostEt ping (ping )

12. get . earfcn ( Center )

33. Statistics DATA

13. get . band

get . inac , set Rcs=1 tInactivityTimer ( Inactivity timer )

get upgr stat, pr upgrade ( Upgrade )

14. get . feature ( Feature )

16. get sync ( Clock )

19. ue print -admitted ( call )

Understand the entire MO Tree

[~]$ moshell 169.254.1.10

1. Have laptop setting same as left.

Similar to system restoration point of Windows.

110326-10:42:06 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/896

Current CV check: cvcu

110331-12:35:07 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE

pol 5: interval 5: wait time

110323-22:33:35 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3644

Waiting 5 seconds before starting to poll...

110331-12:35:25 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE

MME , CELL Status

To check MME status

110310-16:38:07 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/4728

eNB3> lst fdd

Check CELL status

110328-15:19:52 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3796

MME IP modification method (From

eNB3> get mme ipaddress

MME Node addition method

Check Cell status.

110328-15:10:05 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/1940

ENB03> deb 879

Unblock Cell no. 32, currently

110328-15:12:50 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/1940

Block Cell no. 32, currently

110328-15:13:04 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/1940

ENB03> diff 854 879

Brief check of Alarm al

p_c0 = p_reg_c0(2^14)/(1581920) = p_reg_c0 * 16384 / 1228800