Edexcel Igcse ICT Revision Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

Chapter 1: Hardware

You need to know: A computer follows a set of instructions (a program) to input, process, store and output data and information. Hardware is equipment, e.g. a PC and its component parts, e.g. a keyboard, monitor and mouse. Computers are desktop PCs, laptops, tablets, hand-held computers, games consoles, embedded computers, mainframe computers or supercomputers. Input devices include the keyboard and pointing devices, e.g. a mouse or trackpad. Output devices include monitors, printers and speakers.

What is a computer?
A computer is an electronic machine that inputs data, processes it under the control of a stored program, and outputs information. While the data is being processed, data can be retrieved from or saved on backing storage. Data is raw, unprocessed information. Information is data that people understand. In order to understand data, you may have to interpret it:

A date 30/11/2012 A sum of money $301,120.12


The interpreted data, that is the date or the sum of money, is the information.

Input data is entered into the computer. Process a computer is controlled by a program,
that is, a sequence of instructions. It processes the input data automatically following these instructions. hard disk, for later retrieval.

Data input

Program instructions and data

Store the program and data are stored, e.g. on a Output the computer communicates to the user,
e.g. it displays graphics on the screen.

Process Data is retrieved or saved

Data output

Figure 1.1 Flow of data

Chapter 1: Hardware
1

The number 30112012 is data that can be interpreted as:

Types of computer
Computers can be:

PCs (personal computers) a microcomputer for individual use. Mainframe computers large computer, with huge processing power. Minicomputers smaller version of a mainframe. Supercomputers very large mainframe.
Different types of PC

Desktop has these basic components: monitor, keyboard, system unit and mouse. Laptop a portable computer slightly larger than A4 size. Tablet (or pad) a very small portable computer with a touch-sensitive screen and no keyboard. Notebook a small laptop computer. Netbook very small laptop optimised for Internet and email access. Hand-held computer, e.g. smart phone fits into one hand and has a touch-sensitive screen. Can be
temporarily attached to a keyboard.

Chapter 1: Hardware

Games console a PC designed for playing games, e.g. Xbox. Has these features: Graphics displayed very quickly Large hard disk Game controller, e.g. joysticks, buttons Internet connection for online games. Embedded computer designed for and built into equipment to perform specialised functions, e.g. a
single microchip that controls a DVD player.

Processors
A processor or microprocessor is built into a microchip that also has memory and other components built into it. The microchip itself is often referred to as the processor. If there is more than one processor built into the microchip, then the microchip is referred to as the processor and processors built into it are referred to as cores. An important feature of a processor is the speed at which it processes instructions. If you have more and faster cores, with a larger on-board cache, applications will run more quickly. Here is a microprocessor description: Intel Core 2 Duo E8600 Processor (3.33GHz, 1333MHz FSB, 6MB cache). This has two cores and their speed is 3.33GHz. The front side bus (FSB) transfers data between the processor and memory at a speed of 1333MHz. A 6MB cache of RAM memory is built into the microprocessor.
Figure 1.2 An Intel Core 2 Duo microprocessor

The processor you need depends on what you are going to do. For occasional word processing and email, an Intel Pentium Dual Core processor might be sufficient but for playing online multimedia games a faster Intel Pentium Quad Core processor is needed.

Input and output devices

The peripheral devices attached to a computer system are for input, output or storage. An input device is for putting in data to the computer. An output device displays information from the computer.
Input device Keyboard Mouse Scanner

Output device
Monitor Printer Speakers and headphones

Input devices Keyboards


A QWERTY keyboard is used with most PCs and laptops. To use a keyboard efficiently, you need to know the layout and be able to touchtype. Numeric keyboards only have keys to input numbers and special characters. An example of a numeric keypad is an automated teller machine (ATM), also known as a cashpoint.

Pointing devices
Compared with a keyboard, pointing devices make it easier to point and click but are harder to use to input text.

Figure 1.3 An automated teller machine (ATM) or cashpoint showing the numeric keypad

Mouse an optical mouse detects movement using light but some do


this using a small rubber ball.

Joystick a lever that gives you similar control to a mouse. Joysticks Tracker ball
like an upside-down ball mouse with the ball on the top. Move the ball with your thumb. across its surface and the pointer moves on the screen.

are built into game consoles, which are mainly used for input but may have limited output, e.g. they vibrate.

Trackpad a pad below the space bar on a laptop. Move your fingers Graphics tablet a flat rectangular pad 15 to 76 cm (6 to 30 inches)
wide. Move a stylus along its surface to produce line drawings. Mainly used for computer-aided design.

Figure 1.4 Graphics tablet and puck being used to trace a drawing

Chapter 1: Hardware
3

Scanners
A scanner converts printed images on paper into electronic form:

Hand-held scanner reads the image while being dragged over it. Flatbed scanner the image is laid flat on the scanners surface. Sheet-fed scanner reads the image as the paper goes through the
sheet feeder. Scanners may read only particular types of image, e.g. a bar code scanner.
Figure 1.5 A bar code scanner

Optical Mark Recognition (OMR)


An OMR reader recognises a mark made on paper so there is no need to type in the data. The marks position determines its meaning. Marks must be very clear, or they may not be recognised.

Optical Character Recognition (OCR)


OCR is used to input printed or handwritten characters without typing in the data. The characters are converted to text that can be word processed. This text needs to be checked carefully as character recognition is not always accurate.

Chapter 1: Hardware

Magnetic ink character recognition (MICR)


MICR is used to input specially shaped characters printed in magnetic ink. Forms can be pre-printed with data which can be read by a computer, but printing in magnetic ink is more expensive.
OCR vs MICR OCR and MICR both read printed characters. OCR uses reected light while MICR uses magnetic eld patterns. OCR recognises handwriting and different types of printed text but MICR only recognises specially shaped characters.
TOP TIP When you describe the difference between two technologies, each point you make should mention both technologies.

Figure 1.6 MICR uses uniquely shaped characters printed in magnetic ink

Magnetic stripe cards

Information is stored on a magnetic stripe on a plastic card. The data recorded on the magnetic stripe
Smart cards

can be input directly into a computer. Stripe cards can be used to control access. A disadvantage of stripe cards is that the data may be affected by electromagnetic radiation and data can also be copied or edited.

A smart card is a plastic card with a microprocessor chip embedded in it. Bank and credit cards are usually smart cards, i.e. Chip and PIN (personal identification number) cards. They are used to pay for goods in shops and to withdraw cash at cashpoints. Cashpoints are specialised
computer terminals with a small screen, numeric keyboard and smart card reader.

Oyster

cards are smart cards in widespread use in London to pay for travel. They are preloaded with cash credits online.

Smart cards can also be affected by electronic radiation and can be copied or edited but they are generally
more secure than data recorded on a magnetic stripe.

Digital cameras, digital video cameras and webcams

A digital camera stores pictures on a memory card. These can be transferred to a computer or TV. Digital
cameras have a small LCD screen or traditional viewfinder. The camera forms pictures from a mass of very small dots of different colours. Picture quality is related to the density of the dots. memory card or built-in hard disk, and input to a computer.

A webcam is a digital video camera used to view a remote location over the Internet. This may be for
security purposes, interest or communication. Recordings can be made. Simple webcams have a fixed position but some webcams allow the user to turn them.
Digital photos and videos can be: Saved on a computer, so backup is easier and more reliable. Sent by email. Displayed on a wide variety of devices, such as smartphones and TV screens. Broadcast over the Internet, e.g. on-demand TV programmes. Disadvantages: Users store more photos and longer videos so more backing storage is needed. High-quality photos and videos can be very large les. Sent by email or broadcast over the Internet they use more bandwidth and slow the network.

Biometric scanners
A biometric scanner reads a persons unique physical characteristics to identify them, e.g. face recognition. Biometric scanners can be used to control entry to buildings and used in place of car keys. Although identification is not entirely accurate, the use of biometric scanners minimises the risk of fraud and theft.

Figure 1.7 A biometric scanner using ngerprints


5

Chapter 1: Hardware

A digital video camera or camcorder records moving images with sound. Recordings can be saved on a

Sensors

Sensors are used to input environmental data. Examples of uses include recording light intensity, pressure and temperature. Each sensor only detects one type of data. Sensors usually produce a low analogue voltage which must be converted to a digital signal for the
computer using an ADC (analogue-to-digital converter). Sensors are used extensively for data logging and control as data can be continuously and reliably recorded in a form that can be processed by a computer, e.g. in weather stations and robotics. They can be placed in dangerous locations where people would be hurt and can record data that people do not sense accurately, e.g. humidity. Data can be collected frequently over networks from sensors in remote locations.

Audio input devices and technologies


Computer input of sound has a variety of uses:

A touch-tone telephone makes a different beep depending on the button pressed. On the other end of A microphone is used to input sound. Voice recognition software enables the computer to know who is talking but not what has been said. Speech recognition is often used for voice command systems. The speaker is identified and spoken
words recognised as commands.

the line, a computer inputs the beep and determines which button has been pressed. You may then listen to a voice response from the computer.

Chapter 1: Hardware

Natural language processing uses speech recognition to interpret natural language, e.g. spoken
Advantages of audio input: People speak to the computer and do not need to learn to operate a keyboard. Disadvantages:

English. You could use natural language processing to dictate a letter or give instructions to a computer.

Voice and speech recognition software has to be trained to recognise each persons speech. This can be a lengthy process. Voice and speech recognition is not accurate because people pronounce words differently.

Remote control
Remote controls are used to control TVs and garage doors and inaccessible or hidden devices. However, if the handset is lost or damaged, the device may not be useable.
A remote control handset will often have two LEDs. One LED is the infrared transmitter and the light from this is invisible. The other emits a visible light to reassure the user that the remote control is working.
6

The remote control technology used in the home is usually infrared. The transmitter built into the handset sends Figure 1.8 The LEDs built into a out a coded pulse of infrared light when remote handset a button is pressed. A transmitter is often a light-emitting diode (LED). A receiver built into the device being controlled inputs the code and passes it to a microprocessor that carries out the command.

Output devices Monitors

Monitors or visual display units (VDUs) come in different styles with different screen resolutions, colour
quality and clarity.

LCD (liquid crystal display) monitors have flat screens and are more compact than CRT (cathode ray tube)
monitors. They consume less power than CRTs.

A monitor screen is made up of many dots (pixels or picture elements). The dots are so tiny you do not

usually see them. A screen has a resolution of 1280 by 1024 if there are 1280 dots across the screen, and 1024 from top to bottom. Higher quality screens display more dots.

The graphics card (or video card) is housed in the system unit and controls the screen display. Higher
quality cards have more colours and produce clearer graphics more quickly.

Touch screen
A touch screen is used for output and input. You touch the screen to control the computer. Touch screens are mainly used with tablets and smartphones. There is no need for a keyboard but inputting text is slower.

Multimedia projector
A multimedia projector projects the image displayed on a computer screen onto a larger, separate screen, which can be seen more clearly by a large audience. Interactive whiteboards are large, touch-sensitive panels used as screens for multimedia projectors. This technology is used in school classrooms and at home to watch movies and play computer games.

Printers
Printed output is called printout or hard copy.
An impact printer strikes through an inked ribbon onto paper. A non-impact printer uses a non-striking method to form the image on the paper.

Some dot-matrix printers are impact printers with a print head that is
a matrix of steel pins. The pins strike a carbon ribbon making patterns of dots on the paper.

Inkjet printers spray tiny dots of ink onto the paper. Inkjet printers Laser printers are widely used but are more expensive to buy than inkjet printers. Quality is excellent and they print quickly in monochrome or colour.
Printers use different types of paper, for example:

are non-impact dot matrix printers and are quieter. They produce highquality output in monochrome or colour.

Figure 1.9 Enlarged dot-matrix printing produced by an inkjet printer showing how the dots form characters

Thermal printers use heated wires to mark dots on the surface of a heat-sensitive paper. Single sheets of A4 paper. Continuous paper is perforated and can be easily separated into single pages. Pre-printed stationery has information on the paper before computer printing. For example, the name
and address of the company.

Chapter 1: Hardware
7

Print quality

Printers use very small dots to produce text and pictures. A measure of print quality is the dpi (number
of dots per inch). The higher the dpi, the better the print quality.

Photo-printers

Photo-printers are used to print digital photographs. A digital camera is connected to the printer or the
cameras memory card is read in the printer. Pictures can be printed without using a computer.

Advantages of printers: A printout is useful if no computer is available. Disadvantages: Printing is slow and expensive compared with electronic communications. Paper is bulky and deteriorates in storage. Printed materials are more difcult to access and distribute, e.g. digital photos can be emailed and viewed on a multimedia projector.

Plotters

Chapter 1: Hardware
8

A plotter draws lines on paper using coloured pens. A flatbed plotter holds the paper still while the

pensmove. Other plotters move the pens from left to right while the paper moves forwards and backwards.An upright plotter uses very long sheets of paper. Plotters are used in computer-aided design. Plotters are usually more expensive to buy and slower than printers, but much larger sheets canbe printed.

Figure 1.10 An upright plotter

Multi-function devices (MFD)

MFDs combine a printer, scanner and communications link to function as a printer, scanner, photocopier

or fax machine. MFDs are much less expensive to buy than all the individual devices and use less space on the desktop. It is cost effective to replace them more frequently with modern technology. However, if part of the device is faulty, all the functions may be unavailable. If one function is being used, then the other functions are unavailable for other users.

Speakers
Many computers have speakers. Headphones are two small speakers built into a headset. Sound is needed, for example, to play music and for speech synthesis.

Sound cards
A sound card controls all input and output of audio. Audio input through a microphone and output through speakers are usually analogue and the sound card handles their conversion into digital signals processed by the computer. It also handles digital audio input, e.g. from multimedia applications. Sound cards have features such as:

Polyphony plays more than one sound or voice independently at the same time. Output through one or more sound channels, e.g. mono, stereo (2 channels), or quadraphonic
(4channels).

devices.

MIDI (Musical Instrument Digital Interface) to connect to electronic


instruments.

Sound cards are built into or plugged into the motherboard of a PC, or can be external devices that plug into a USB port.

Actuators
In control applications, computers make events happen using actuators, e.g. heaters and motors. A buzzer is an actuator that, for example, warns when the microwave has cooked our dinner. Actuators can perform physical tasks such as controlling a robot or operating a digger. This can be dangerous for people if their presence is not detected by the computer.

Chapter 1: Hardware
9

Surround sound or 3D audio. Improves the clarity of compressed audio files, e.g. mp3. Built-in memory for faster sound processing. USB, optical and other ports to connect to DVD recorders and other

Worked Example
A desktop PC is used for office work at an Estate Agent. a) b) c) State one input device needed and explain why it is needed. State one output device needed and explain why it is needed. The ofce is cramped and the manager purchases an MFD to replace the photocopier. i. Name three other hardware devices an MFD replaces. ii. State one advantage and one disadvantage of purchasing the MFD. Answers a) b) c) There are several correct answers, e.g. a digital camera is used to take digital pictures of houses for sale to upload to the Estate Agents website. There are several correct answers, e.g. a colour printer is used to print details of houses for sale to be given to customers. i. Printer; scanner; fax machine. ii. There are several correct answers. For example: Advantage: MFDs are more compact than the individual devices replaced. Disadvantage: If the MFD breaks down this has more impact on ofce work than if an individual device is not working.

TOP TIP Relate your answers to the context, i.e. the Estate Agent.

Chapter 1: Hardware

Exam-Style Questions
1. A printer is a type of: A processor B input device C software D output device (1 mark) 2. Which of these devices is not used to control a screen pointer? A a mouse B a trackpad C a webcam D a joystick A supercomputer B desktop C mainframe D tablet (1 mark) 4. A biometric scanner controls access to a secure warehouse. One advantage is: A No one can get into the warehouse B No need to carry a swipe card C Biometric scanners always recognise banned users (1 mark) 3. Which type of computer is the most portable? 5. Other than the keyboard, name an input device you would use to: a) Select from a menu. (1 mark) b) Convert a page of printed text to a file that can be word processed. (1 mark) 6. State whether each of the following is used for input or output or both. Explain your answers. a) Printer b) Game console 7. Smart phones have touch screens. a) Explain why a smart phone has a touch screen. (1 mark) b) State two uses of a smart phone other than making phone calls. (2 marks) c) Explain why some smart phones connect to external keyboards. (1 mark) 8. The resolution of a monitor screen is changed from 1280x1024 to 800x600. State one change you would see on the screen display. (1 mark) 9. A student owns a desktop computer and a tablet computer. Explain why. (3 marks) (2 marks) (2 marks)

10

D Identity theft is difficult

(1 mark)

You might also like