Scribd Logo
Upload

Welcome to Scribd!

  • 3K views

    DFMA

    Uploaded by

    Kumaravel Sivam
    This document outlines the topics covered in a 5 unit course on design for manufacture and assembly. Unit 1 introduces general design principles for manufacturability. Unit 2 covers how material selection influences form design. Unit 3 discusses component design considerations for machining. Unit 4 focuses on component design for casting. Unit 5 is about designing for the environment. The course aims to teach students how to design products that are easy to manufacture and assemble.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DFMA

    Uploaded by

    Kumaravel Sivam
    3K views1 page
    This document outlines the topics covered in a 5 unit course on design for manufacture and assembly. Unit 1 introduces general design principles for manufacturability. Unit 2 covers how material selection influences form design. Unit 3 discusses component design considerations for machining. Unit 4 focuses on component design for casting. Unit 5 is about designing for the environment. The course aims to teach students how to design products that are easy to manufacture and assemble.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the topics covered in a 5 unit course on design for manufacture and assembly. Unit 1 introduces general design principles for manufacturability. Unit 2 covers how material selection influences form design. Unit 3 discusses component design considerations for machining. Unit 4 focuses on component design for casting. Unit 5 is about designing for the environment. The course aims to teach students how to design products that are easy to manufacture and assemble.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3K views1 page

    DFMA

    Uploaded by

    Kumaravel Sivam
    This document outlines the topics covered in a 5 unit course on design for manufacture and assembly. Unit 1 introduces general design principles for manufacturability. Unit 2 covers how material selection influences form design. Unit 3 discusses component design considerations for machining. Unit 4 focuses on component design for casting. Unit 5 is about designing for the environment. The course aims to teach students how to design products that are easy to manufacture and assemble.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    P10END204 DESIGN FOR MANUFACTURE AND ASSEMBLY UNIT 1 INTRODUCTION 8

    3 0 03

    General design principles for manufacturability - strength and mechanical factors, mechanisms selection, evaluation method, Process capability - Feature tolerances Geometric tolerances - Assembly limits -Datum features - Tolerance stacks. UNIT 2 FACTORS INFLUENCING FORM DESIGN 10

    Influence of materials on form design - form design of grey iron, malleable iron, steel and aluminium castings form design of welded members, forgings. UNIT 3 COMPONENT DESIGN - MACHINING CONSIDERATION 9 Design features to facilitate machining - drills - milling cutters - keyways - Doweling procedures, counter sunk screws - Reduction of machined area- simplification by separation - simplification by amalgamation - Design for machinability - Design for economy - Design for clampability - Design for accessibility - Design for assembly. UNIT 4 COMPONENT DESIGN - CASTING CONSIDERATION 9 Redesign of castings based on Parting line considerations - Minimizing core requirements, machined holes, redesign of cast members to obviate cores. Identification of uneconomical design - Modifying the design - group technology - Computer Applications for DFMA UNIT 5 DESIGN FOR THE ENVIRONMENT 9 Introduction Environmental objectives Global issues Regional and local issues Basic DFE methods Design guide lines Example application Lifecycle assessment Basic method AT&Ts environmentally responsible product assessment - Weighted sum assessment method Lifecycle assessment method Techniques to reduce environmental impact Design to minimize material usage Design for disassembly Design for recyclability Design for remanufacture Design for energy efficiency Design to regulations and standards. Total 45

    REFERENCES: 1. Boothroyd, G, Design for Assembly Automation and Product Design, Marcel Dekker, New York., 1980 2. Bralla, Design for Manufacture handbook, McGraw hill, 1999. 3. Boothroyd, G, Heartz and Nike, Product Design for Manufacture, Marcel Dekker, 1994. 4. Dickson, John. R, and Corroda Poly, Engineering Design and Design for Manufacture and Structural Approach, Field Stone Publisher, USA, 1995. 5. Fixel, J. Design for the Environment McGraw hill., 1996. 6. Graedel T. Allen By. B, Design for the Environment Angle Wood Cliff, Prentice Hall. Reason Pub., 1996. 7. Kevien Otto and Kristin Wood, Product Design. Pearson Publication, 2004.

    You might also like