603 MSDS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1

Page 1 of 5
SDS no. : 153475 V001.3

Loctite 603

Revision: 04.01.2008 printing date: 31.12.2008

1. Identification of the substance/preparation and of the company/undertaking


Trade name: Loctite 603 Intended use: Anaerobic Company name: Henkel AG & Co. KGaA Henkelstr. 67 40191 Dsseldorf Germany Phone: +49 (211) 797-0

E-mail address of person responsible for Safety Data Sheet: [email protected]

Emergency information: 24 Hours Emergency Tel: +44(0)8701906777

2. Hazards identification
Non corrosive to skin in accordance with the in vitro test method, B40 Skin Corrosion - Human skin model assay, specified in Part B of Annex V to Directive 67/548/EEC. R41 Risk of serious damage to eyes. R37/38 Irritating to respiratory system and skin. R43 May cause sensitization by skin contact.

3. Composition / information on ingredients


General chemical description: Anaerobic Sealant Declaration of ingredients according to EC/1907/2006:

MSDS-No.: 153475 V001.3

Loctite 603

Page 2 of 5

Hazardous components CAS-No. Hydroxypropyl methacrylate 27813-02-1 Acrylic acid 79-10-7

EINECS ELINCS 248-666-3 201-177-9

content > 5 - < 10 % > 5 - < 10 %

Classification Xi - Irritant; R36, R43 R10 Xn - Harmful; R20/21/22 C - Corrosive; R35 N - Dangerous for the environment; R50 O - Oxidizing; R7 T - Toxic; R23 Xn - Harmful; R21/22, R48/20/22 C - Corrosive; R34 N - Dangerous for the environment; R51, R53 R10 Xn - Harmful; R65 Xi - Irritant; R37 N - Dangerous for the environment; R51, R53 Xi - Irritant; R37 Xi - Irritant; R36/37/38

Cumene hydroperoxide 80-15-9

201-254-7

> 0,1 - < 1 %

Cumene 98-82-8

202-704-5

> 0,1 - < 0,5 %

4-t-Butylcyclohexyl methacrylate 46729-07-1 1,3-Butyleneglycol dimethacrylate 1189-08-8

256-277-5 214-711-0

> 30 - < 50 % > 10 - < 20 %

For full text of the R-Phrases indicated by codes see section 16 'Other Information'. Substances without classification may have community workplace exposure limits available.

4. First aid measures


Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Seek medical advice. Eye contact: Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary. Ingestion: Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Seek medical advice.

5. Fire fighting measures


Suitable extinguishing media: carbon dioxide, foam, powder Special protection equipment for firefighters: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Hazardous combustion products: Oxides of carbon, oxides of nitrogen, irritating organic vapors., Sulphur oxides

6. Accidental release measures


Personal precautions: Avoid skin and eye contact. Environmental precautions: Do not let product enter drains. Clean-up methods: For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal.

MSDS-No.: 153475 V001.3

Loctite 603

Page 3 of 5

7. Handling and storage


Handling: Use only in well-ventilated areas. Avoid skin and eye contact. Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation Storage: Store in original containers at 8-21C (46.4-69.8F) and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.

8. Exposure controls / personal protection


Respiratory protection: Use only in well-ventilated areas. Hand protection: The use of chemical resistant gloves such as Nitrile are recommended Please note that in practice the working life of chemical resistant gloves may be considerably reduced as a result of many influencing factors (e.g. temperature). Suitable risk assessment should be carried out by the end user. If signs of wear and tear are noticed then the gloves should be replaced. Eye protection: Wear protective glasses. Skin protection: Wear suitable protective clothing. General protection and hygiene measures: Good industrial hygiene practices should be observed

9. Physical and chemical properties


General characteristics: Appearance Odor: liquid green characteristic

Phys./chem. properties:
Boiling point Flash point Vapor pressure (27,0 C (80.6 F)) Density () Solubility (qualitative) (Solvent: Water) VOC content (1999/13/EC) > 149,0 C (> 300.2 F) > 93,3 C (> 199.94 F) < 10 mm Hg 1,07 g/cm3 Slight 3%

10. Stability and reactivity


Conditions to avoid: Stable Materials to avoid: Reaction with strong acids. Reacts with strong oxidants.

MSDS-No.: 153475 V001.3

Loctite 603

Page 4 of 5

11. Toxicological information


Oral toxicity: May cause irritation to the digestive tract. Inhalative toxicity: Irritating to respiratory system Skin irritation: Irritating to the skin Eye irritation: Risk of serious damage to eyes Sensitizing: May cause sensitization by skin contact.

12. Ecological information


General ecological information: Do not empty into drains / surface water / ground water. Precautions required with respect to Environmental Hazards of articles in which this product is used should be considered.

13. Disposal considerations


Product disposal: Do not empty into drains / surface water / ground water. Dispose of in accordance with local and national regulations. Waste code( ): 08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated. Disposal must be made according to official regulations.

14. Transport information


General information: Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.

15. Regulations - classification and identification


Indication of danger: Xi - Irritant

MSDS-No.: 153475 V001.3

Loctite 603

Page 5 of 5

Contains Hydroxypropyl methacrylate, Acrylic acid Risk phrases: R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. R43 May cause sensitization by skin contact. Safety phrases: S24/25 Avoid contact with skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S37/39 Wear suitable gloves and eye/face protection. S51 Use only in well-ventilated areas.

16. Other information


The labelling of the product is indicated in Section 15. The full text of the R-phrases indicted by codes in this safety data sheet are as follows: R10 Flammable. R20/21/22 Harmful by inhalation, in contact with skin and if swallowed. R21/22 Harmful in contact with skin and if swallowed. R23 Toxic by inhalation. R34 Causes burns. R35 Causes severe burns. R36 Irritating to eyes. R36/37/38 Irritating to eyes, respiratory system and skin. R37 Irritating to respiratory system. R43 May cause sensitization by skin contact. R48/20/22 Harmful: danger of serious damage to health by prolonged exposure through inhalation and if swallowed. R50 Very toxic to aquatic organisms. R51 Toxic to aquatic organisms. R53 May cause long-term adverse effects in the aquatic environment. R65 Harmful: may cause lung damage if swallowed. R7 May cause fire. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. This safety data sheet was prepared in accordance with Council Directive 67/548/EEC and it's subsequent amendments, and Commission Directive 1999/45/EC.

You might also like