Scribd
Upload
3K views3 pages

How To - Setup Serial Console Connection Using PuTTy

This document provides instructions for setting up a serial console connection between a Cyberoam appliance and a PC using PuTTy. The steps include physically connecting the appliance to the PC with a serial cable, launching PuTTy and selecting serial connection type, configuring the serial port settings in PuTTy to match the appliance, and opening the connection to access the Cyberoam CLI login page using the administrator password.

Uploaded by

projgo
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views3 pages

How To - Setup Serial Console Connection Using PuTTy

This document provides instructions for setting up a serial console connection between a Cyberoam appliance and a PC using PuTTy. The steps include physically connecting the appliance to the PC with a serial cable, launching PuTTy and selecting serial connection type, configuring the serial port settings in PuTTy to match the appliance, and opening the connection to access the Cyberoam CLI login page using the administrator password.

Uploaded by

projgo
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

How To Setup Serial Console Connection Using Putty

How To - Setup Serial Console Connection using PuTTy

Applicable Version: 10.00 onwards


A serial connection can be established between any Cyberoam Appliance and a PC using a console/serial cable (cable having a 9 pin DB supplied with the Cyberoam appliance). PuTTy, an open source SSH and Telnet client, can be used to setup the serial connection. To download PuTTy, click here. To setup a serial console connection between Cyberoam Appliance and a PC, follow the steps given below: 1. Physically connect one end of the serial cable - RJ45 connector (console cable supplied with Cyberoam Appliance) to Console port on the front panel of Cyberoam and the other end to the PCs serial port. 2. Launch PuTTy. Select Connection type as Serial.

How To Setup Serial Console Connection Using Putty

3. Go to Connection Serial to configure the Options controlling local serial lines according to table given below: Parameter Serial line to connect to Speed (Baud) Data bits Stop bits Parity Flow control Value COM1 9600 8 1 None None

4. Click Open to establish the connection. Cyberoam CLI login page is displayed.

How To Setup Serial Console Connection Using Putty

5. Access Cyberoam CLI using administrator password.

Document Version: 1.0 19/01/2012

You might also like