Scribd
Upload
307 views2 pages

MTAP2 Specs

This document provides specifications for a device that safely tests energized AC electric motors. It can test motors up to 600V and has isolation circuits to limit voltage exposure. The device is UL, CSA, and NFPA certified. It mounts on a DIN rail and includes current transformers (CTs) in various current ratings to measure motor current.

Uploaded by

bwelz
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
307 views2 pages

MTAP2 Specs

This document provides specifications for a device that safely tests energized AC electric motors. It can test motors up to 600V and has isolation circuits to limit voltage exposure. The device is UL, CSA, and NFPA certified. It mounts on a DIN rail and includes current transformers (CTs) in various current ratings to measure motor current.

Uploaded by

bwelz
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Increased Safety For Testing Energized AC Electric Motors

Specifications

Voltage at MCC test port: 30V RMS nominal, <50V peak Input voltages (select one when ordering): 120, 240, 480, 600 VAC Motors rated over 600V, require the 120V/5A model and existing metering PTs and CTs Current input terminal strip (0-3V RMS input), current represented by voltage signal MCC test port: Circular military style, 1-inch diameter, extends out inch

Physical Dimensions

Size: 7.25 x 5.6 inches x 3.5 inches deep Weight: less than 3 lbs. Mounts to DIN rail via 2 mounting brackets Mounting brackets provided, DIN rail not provided Optional Mounting: Mount circuit board directly to MCC 4 mounting feet (must specify if required)

Circuit Protection and Isolation


3 primary and 3 secondary fast-acting fuses on potential transformer Transorbs used to limit voltage for current and voltage signals to test port Electrical Isolation: potential transformer rated 2000V DC High Potential test

Standards and Certifications


Designed to UL508, UL845, and CSA 22.2 #14 standards cCSAus certification Meets NFPA 70E guidelines for safe voltage level

CT Information

CT Primary Current Rating CT Opening Size (inside diameter in inches) Design Voltage Class (max continuous voltage) Burden Resistor Output (mV/A) Burden in VA at rated current Burden in VA at 10X rated current Wire Length ANSI / IEEE Standard # CSA Standard #

5A 0.3 Iron Core Donut 600V Built-in 66.7 mV / A 0.003 0.28 8 ft IEEE-C57.13 CAN3-C13-M83

100A 1.25 Iron Core Donut 600V Built-in 3.3 mV / A 0.04 3.63 8 ft IEEE-C57.13 CAN3-C13-M83

400A 1.25 Iron Core Donut 600V Built-in 0.833 mV / A 0.14 14.5 8 ft IEEE-C57.13 CAN3-C13-M83

To Order

Module:

Specify input voltage and CT current rating. Requires one external cable to connect tester to MCC test port: Part Number ASY-00321

You might also like