0% found this document useful (0 votes)
104 views1 page

Cumeno - Data

This document describes the production conditions for making cumene. A recycle reactor operates at 220 F and 36 psia, using 40 lbmol/hr of benzene and 40 lbmol/hr of propylene. The reaction of benzene and propylene produces cumene at 90% conversion of propylene. The process involves cooling and separating the reaction products before collecting the cumene product.

Uploaded by

Gonzalo Rosado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
104 views1 page

Cumeno - Data

This document describes the production conditions for making cumene. A recycle reactor operates at 220 F and 36 psia, using 40 lbmol/hr of benzene and 40 lbmol/hr of propylene. The reaction of benzene and propylene produces cumene at 90% conversion of propylene. The process involves cooling and separating the reaction products before collecting the cumene product.

Uploaded by

Gonzalo Rosado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cumene Production Conditions

RECYCLE REACTOR COOL FEED

T = 220 F P = 36 psia Benzene: 40 lbmol/hr Propylene: 40 lbmol/hr

REAC-OUT

COOL-OUT

SEP

P = 1 atm Q = 0 Btu/hr

Q = 0 Btu/hr Pdrop = 0 psi

T = 130 F Pdrop = 0.1 psi


PRODUCT

C6H6 + C3H6 = C9H12 Benzene Propylene Cumene (Isopropylbenzene) 90% Conversion of Propylene

Use the RK-SOAVE Property Method Filename: CUMENE.BKP


Septiembre 12, 2001

Introduction to Aspen Plus

Slide 36
1998 AspenTech. All rights reserved.

You might also like