75% found this document useful (4 votes)
3K views1 page

Vm-10 (Diesel Generator Overhauling Report)

The document is a diesel generator overhauling report detailing inspection findings between 6,000-8,000 hours of operation. It records cylinder measurements, piston and connecting rod conditions, liner wear measurements, and lubrication and fuel types. Inspections found ring groove heights, scraper groove heights, and ovality within makers specifications. Liner wear was calculated to be [X] mm/1000 hours since the last overhaul.

Uploaded by

catalin
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
75% found this document useful (4 votes)
3K views1 page

Vm-10 (Diesel Generator Overhauling Report)

The document is a diesel generator overhauling report detailing inspection findings between 6,000-8,000 hours of operation. It records cylinder measurements, piston and connecting rod conditions, liner wear measurements, and lubrication and fuel types. Inspections found ring groove heights, scraper groove heights, and ovality within makers specifications. Liner wear was calculated to be [X] mm/1000 hours since the last overhaul.

Uploaded by

catalin
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

CANADO MANAGEMENT SYSTEM

VM-10

DIESEL GENERATOR OVERHAULING REPORT


(6000 8000 HOURS)
VESSEL: M/V___________________________

DATE:

Type of Aux. Engine:_____________________

Number:________________

PISTON
CYL No :

Cylinder No as per Classification Society

COMMENTS:

COMMENTS:

CROWN CONDITION
RING GROOVE HEIGHT: 1
2
3
4
SCRAPER GROOVE HEIGHT
RING GAP IN LINER
PISTON HOURS
CONNECTING ROD

MAKERS MAX OVALITY (mm):

CYL No :

: MIN. DIA
: MAX. DIA
-= OVALITY
SERRATIONS CONDN (ok)
CON. ROD BOLT HOURS
CON. ROD HOURS
CYL No :
LINER MEASUREMENT

1
F
A

2
P
S

F
A

3
P
S

F
A

4
P
S

F
A

5
P
S

F
A

6
P
S

F
A

COMMENTS:
P
S

TOP
MIDDLE
BOTTOM
MAX WEAR
LINER HOURS
/(1000) =
WEAR IN mm/1000 hrs
HOURS SINCE LAST O/HAUL

COMMENTS:

TOTAL RUNNING HOURS


LAST SURVEY BY CLASS.

TYPE OF LUBE OIL:

TYPE OF FUEL OIL:

REMARKS:
Port

Chief Engineer:

Diesel Generator Overhauling Report / Rev 1-00 / Page 1 of 1

You might also like