Data Sheet No. PD60177 Rev.

IR4426/IR4427/IR4428(S)&(PbF) DUAL LOW SIDE DRIVER

Features
Gate drive supply range from 6 to 20V CMOS Schmitt-triggered inputs Matched propagation delay for both channels Outputs out of phase with inputs (IR4426) Outputs in phase with inputs (IR4427) OutputA out of phase with inputA and Also available LEAD-FREE
OutputB in phase with inputB (IR4428)

Product Summary
IO+/VOUT ton/off (typ.) 1.5A / 1.5A 6V - 20V 85 & 65 ns

Descriptions
The IR4426/IR4427/IR4428 (S) is a low voltage, high speed power MOSFET and IGBT driver. Proprietary latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays between two channels are matched.

Packages

8 Lead PDIP 8 Lead SOIC

Typical Connection

NC

NC

INA

OUTA

TO LOAD

IR442x
GND Vs INB OUTB

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to GND. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.

Symbol
VS VO VIN PD RthJA TJ TS TL

Definition
Fixed supply voltage Output voltage Logic input voltage Package power dissipation @ TA +25C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) (8 Lead PDIP) (8 lead SOIC) (8 lead PDIP) (8 lead SOIC)

Min.
-0.3 -0.3 -0.3 -55

Max.
25 VS + 0.3 VS + 0.3 1.0 0.625 125 200 150 150 300

Units
V

W C/W

Recommended Operating Conditions

The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to GND.

Symbol
VS VO VIN TA

Definition
Fixed supply voltage Output voltage Logic input voltage Ambient temperature

Min.
6 0 0 -40

Max.
20 VS VS 125

Units
V C

DC Electrical Characteristics
VBIAS (VS) = 15V, TA = 25C unless otherwise specified. The VIN, and IIN parameters are referenced to GND and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to GND and are applicable to the output leads: OUTA and OUTB.

Symbol
VIH (IR4426)

Definition
Logic 0 input voltage (OUTA=LO, OUTB=LO) Logic 1 input voltage (OUTA=HI, OUTB=HI) (IR4427) Logic 0 input voltage (OUTA=LO), input voltage (OUTB=HI) (IR4428) Logic 1

Min. Typ. Max. Units Test Conditions

2.7

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

DC Electrical Characteristics cont.

VBIAS (VS) = 15V, TA = 25C unless otherwise specified. The VIN, and IIN parameters are referenced to GND and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to GND and are applicable to the output leads: OUTA and OUTB.

Symbol
VIL (IR4426)

Definition
Logic 1 input voltage (OUTA=HI, OUTB=HI) Logic 0 input voltage (OUTA=LO, OUTB=LO) (IR4427) Logic I input voltage (OUTA=HI), input voltage (OUTB=LO) (IR4428) Logic 0

Min. Typ. Max. Units Test Conditions

0.8

VOH VOL IIN+

High level output voltage, VBIAS-VO Low level output voltage, VO Logic 1 input bias current (OUT=HI)

1.2 0.1 15

Io = 0mA Io = 0mA VIN = 0V (IR4426) VIN = VS (IR4427) VINA = 0V (IR4428) VINB = VS (IR4428)

IIN-

Logic 0 input bias current (OUT=LO)

-10

-30

VIN = VS (IR4426) VIN = 0V (IR4427) VINA = VS (IR4428) VINB = 0V (IR4428)

IQS IO+

Quiescent Vs supply current Output high short circuit pulsed current

1.5

100 2.3

200

VIN = 0V or VS VO = 0V, VIN = 0 (IR4426) VO = 0V, VIN = VS (IR4427) VO = 0V, VINA = 0 (IR4428) VO = 0V, VINB = VS A (IR4428) PW 10 s VO = 15V, VIN = VS (IR4426) VO = 15V, VIN = 0 (IR4427) VO = 15V, VINA = VS (IR4428) VO = 15V, VINB = 0 (IR4428) PW 10 s

IO-

Output low short circuit pulsed current

1.5

3.3

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

AC Electrical Characteristics
VBIAS (VS) = 15V, CL = 1000pF, TA = 25oC unless otherwise specified.

Symbol Definition Propagation delay characteristics

td1 td2 tr tf Turn-on propagation delay Turn-off propagation delay Turn-on rise time Turn-off fall time

Min. Typ. Max. Units Test Conditions

85 65 15 10 160 150 35 25 ns figure 4

Functional Block Diagram IR4426

5V

Vs

INA
PREDRV

DRV

OUTA

5V Vs

INB
PREDRV

DRV

OUTB

GND

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Functional Block Diagram IR4427

Vs

INA
PREDRV

DRV

OUTA

Vs

INB
PREDRV

DRV

OUTB

GND

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Functional Block Diagram IR4428

5V

Vs

INA
PREDRV

DRV

OUTA

Vs

INB
PREDRV

DRV

OUTB

GND

Lead Definitions
Symbol Description
VS GND INA INB OUTA OUTB Supply voltage Ground Logic input for gate driver output (OUTA), out of phase (IR4426, IR4428), in phase (IR4427) Logic input for gate driver output (OUTB), out of phase (IR4426), in phase (IR4427, IR4428) Gate drive output A Gate drive output B

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Lead Assignments

INA GND INB

OUTA VS OUTB

INA GND INB

OUTA VS OUTB

INA GND INB

OUTA VS V S OUTB

8 Lead PDIP

8 Lead PDIP

8 Lead PDIP

IR4426

IR4427 Part Number

IR4428

Lead Assignments

INA GND INB

OUTA VS OUTB

INA GND INB

OUTA VS OUTB

INA GND INB

OUTA VS V S OUTB

8 Lead SOIC

8 Lead SOIC

8 Lead SOIC

IR4426S

IR4427S Part Number

IR4428S

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

INA (IR4426, IR4428) INB (IR4426) INA (IR4427) INB (IR4427, IR4428) OUTA OUTB

Figure 3. Timing Diagram

INA (IR4426, IR4428) INB (IR4426)

INA (IR4427) INB (IR4427, IR4428) td1 tr td2 tf

OUTA OUTB

Figure 4. Switching Time Waveforms

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION
VS = 15V VS = 15V

4.7UF 0.1UF

4.7UF 0.1UF

INA 2 7 OUTA CL = 1000PF

INA 2 7 OUTA CL = 1000PF

INB 4 5 OUTB CL = 1000PF

INB 4 5 OUTB CL = 1000PF

3 IR4426

VS = 15V

3 IR4427 4.7UF 0.1UF

INA 2 7 OUTA CL = 1000PF

INB 4 5 OUTB CL = 1000PF

3 IR4428

Figure 5. Switching Time Test Circuits www.irf.com 9

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Caseoutline

8 Lead PDIP

01-3003 01

Tape & Reel

10

www.irf.com

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

Case Outline - 8 Lead SOIC

(MS-012AA) 01-0021 09

www.irf.com

11

IR4426/IR4427/IR4428(S) & (PbF)

ADVANCE INFORMATION

LEADFREE PART MARKING INFORMATION

Part number

IRxxxxxx YWW? ?XXXX

Lot Code (Prod mode - 4 digit SPN code) IR logo

Date code

Pin 1 Identifier ? P MARKING CODE Lead Free Released Non-Lead Free Released

Assembly site code Per SCOP 200-002

ORDER INFORMATION
Basic Part (Non-Lead Free) 8-Lead PDIP IR4426 order 8-Lead SOIC IR4426S order 8-Lead PDIP IR4427 order 8-Lead SOIC IR4427S order 8-Lead PDIP IR4428 order 8-Lead SOIC IR4428S order Leadfree Part 8-Lead PDIP IR4426 8-Lead SOIC IR4426S 8-Lead PDIP IR4427 8-Lead SOIC IR4427S 8-Lead PDIP IR4428 8-Lead SOIC IR4428S

IR4426 IR4426S IR4427 IR4427S IR4428 IR4428S

order order order order order order

IR4426PbF IR4426SPbF IR4427PbF IR4427SPbF IR4428PbF IR4428SPbF

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been qualified per industrial level Data and specifications subject to change without notice. 3/3/2008

12

www.irf.com