Scribd
Upload
64 views1 page

Prob. 10.99 Data

This document contains data from an experiment calibrating a rectangular weir. It lists the dimensions of the weir as having a width of 6 inches and length of 1.4 feet. It then provides water depth measurements over the weir (H in feet) and the corresponding time for a given volume of water to pass through the weir (t in seconds), with depths ranging from 0.254 to 0.031 feet and times from 2.2 to 38.4 seconds.

Uploaded by

jarot
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
64 views1 page

Prob. 10.99 Data

This document contains data from an experiment calibrating a rectangular weir. It lists the dimensions of the weir as having a width of 6 inches and length of 1.4 feet. It then provides water depth measurements over the weir (H in feet) and the corresponding time for a given volume of water to pass through the weir (t in seconds), with depths ranging from 0.254 to 0.031 feet and times from 2.2 to 38.4 seconds.

Uploaded by

jarot
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Data for Problem 10.

99: Calibration of a Rectangular Weir

b, in. Pw, in. L, ft


6.00 6.00 1.40

H, ft t, s
0.254 2.2
0.216 2.7
0.184 3.0
0.162 4.2
0.151 4.5
0.111 6.6
0.060 15.8
0.046 23.8
0.031 38.4

You might also like