Scribd
Upload
209 views1 page

Triangle: Transfer Switches Series Dts

This document discusses diode transfer switches that allow power to enter through two input ports (A and B) and exit through output ports C and D, or vice versa depending on the switching. The switches operate between 0.025-18 GHz with 50 ohm impedance. They can switch between the input-output port configurations in under 1 microsecond and operate from -55°C to +85°C. Performance details are provided for various models including their frequency range, insertion loss, isolation, and maximum power handling ability.

Uploaded by

vietbkfet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
209 views1 page

Triangle: Transfer Switches Series Dts

This document discusses diode transfer switches that allow power to enter through two input ports (A and B) and exit through output ports C and D, or vice versa depending on the switching. The switches operate between 0.025-18 GHz with 50 ohm impedance. They can switch between the input-output port configurations in under 1 microsecond and operate from -55°C to +85°C. Performance details are provided for various models including their frequency range, insertion loss, isolation, and maximum power handling ability.

Uploaded by

vietbkfet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIODE

TRANSFER SWITCHES
0.025 - 18 GHz GENERAL INFORMATION
Series DTS transfer switches allow power entering two input ports, A and B, to exit from output ports C and D respectively, or by appropriate switching, to exit from ports D and C respectively. A functional schematic of a transfer is shown in Fig. 1, and a typical circuit is shown in Fig. 2.

SERIES DTS

GENERAL SPECIFICATIONS
Frequency Coverage: RF Impedance: DC Requirements: 0.025 to 18.0 GHz. 50 OHMS. For all units with driver Logic 0 = Ins. Loss AC, BD Isol. AD, BC Logic 1 = Ins. Loss AD, BC Isol. AC, BD Operating temperature from 55C to +85C. 10% to 90% or 90% to 10% of RF. There is an additional 20 nanosec of driver delay. 1 sec SMA

Temperature Information: Switching Speed:

Typical: Connectors:

ELECTRICAL PERFORMANCE
Frequency Ins Model Range Loss dB No. GHz Maximum DTS-12 0.025-0.25 0.75 DTS-18 0.10-0.50 1.0 DTS-27 0.5-1.0 0.8 DTS-29 0.5-2.0 1.0 DTS-33 1.0-2.0 1.0 DTS-45 1.7-2.4 1.2 DTS-48 2.0-4.0 1.5 DTS-58 4.0-8.0 1.8 DTS-75 6.0-18.0 3.2 VSWR Maximum 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.6 2.0 Isolation dB Minimum 60 60 60 60 60 50 50 40 30 Maximum Power Handling Ability Watts PK Watts Avg. 5 1.0 5 1.0 2 0.5 5 1.0 2 0.5 5 1.0 2 0.5 5 1.0 2 0.5

KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]

10/98

An MCE Company

CORPORATION

TRIANGLE

60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 Fax: 973-884-0445 E-Mail: [email protected] See us on the web @ www.kditriangle.com

This datasheet has been downloaded from http://www.digchip.com at this page

You might also like