Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Canon Generic "S" Series Reset Code

    Uploaded by

    daswindra
    The document provides instructions for resetting the waste ink counter on a Canon GENERIC "S" SERIES printer. The instructions involve turning the printer on while holding two buttons, which will put the printer in service mode. From there, pressing another button four times will select the reset waste ink counter function. Pressing the power button will set the change and restart the printer with a reset counter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Canon Generic "S" Series Reset Code

    Uploaded by

    daswindra
    34 views1 page
    The document provides instructions for resetting the waste ink counter on a Canon GENERIC "S" SERIES printer. The instructions involve turning the printer on while holding two buttons, which will put the printer in service mode. From there, pressing another button four times will select the reset waste ink counter function. Pressing the power button will set the change and restart the printer with a reset counter.

    Original Description:

    Reset canon printer

    Original Title

    Reset All Canon.doc

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for resetting the waste ink counter on a Canon GENERIC "S" SERIES printer. The instructions involve turning the printer on while holding two buttons, which will put the printer in service mode. From there, pressing another button four times will select the reset waste ink counter function. Pressing the power button will set the change and restart the printer with a reset counter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    34 views1 page

    Canon Generic "S" Series Reset Code

    Uploaded by

    daswindra
    The document provides instructions for resetting the waste ink counter on a Canon GENERIC "S" SERIES printer. The instructions involve turning the printer on while holding two buttons, which will put the printer in service mode. From there, pressing another button four times will select the reset waste ink counter function. Pressing the power button will set the change and restart the printer with a reset counter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    Canon GENERIC S SERIES RESET CODE Waste Ink Counter Reset. (1) matiin printer.

    (2) pencet & tahan tombol RESUME, lalu pencet & tahan tombol POWER. (3) lepasin tombol RESUME, lalu pencet and lepasin tombol RESUME dua (2) kali in succession. Note: you are still tahan the POWER tombol). The printers carriage will reset or move momentarily. If the above was properly performed the printer will enter the Service Mode. (4) Pencet the RESUME tombol 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key pencet. 1. Service/Factor y test printout, including ink sensor check.

    2. EEPROM Info printout. 3. EEPROM Initialization. 4. Reset the Waste ink counter. 5. Printer model setting. (More selections beyond this point However it is best leave them unaltered You have been warned!) After selecting the desired mode (eg 4), pencet the POWER tombol to set the change, and return to the top of the function selection menu. Pencet the POWER tombol again to restart the printer.

    You might also like