Scribd
Upload
32 views4 pages

Column 1

Design OF COLUMN (l / d) = 6500 / 600 = 10. 12 Biaxial Bending Hence the column is designed as short column. Tie Reinforcement Diameter - greater 1. 12 / 4 = 3 2. 6 mm Adopt 8 mm dia. Bars. Pitch of ties is least of 1. Least lateral dimension= 600 mm 2. 16 x diameter of bars = 192 mm 3. 48 times dia. Of bars a longitudinal and 8mm lateral ties at 200

Uploaded by

sibirich123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
32 views4 pages

Column 1

Design OF COLUMN (l / d) = 6500 / 600 = 10. 12 Biaxial Bending Hence the column is designed as short column. Tie Reinforcement Diameter - greater 1. 12 / 4 = 3 2. 6 mm Adopt 8 mm dia. Bars. Pitch of ties is least of 1. Least lateral dimension= 600 mm 2. 16 x diameter of bars = 192 mm 3. 48 times dia. Of bars a longitudinal and 8mm lateral ties at 200

Uploaded by

sibirich123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN OF COLUMN

(L/d) = 6500/600 = 10.83 < 12


Biaxial Bending
Hence the column is designed as short column
Data
Size of column = 600x600 mm
Clear cover(d) = 40 mm
Concrete Mix = M20
Characteristics strength of steel = Fe 415
d/D=0.067
Reinforcement, From STAADPRO V8i analysis,
Factored load Pu = 1392 kN
Factored moment Mux = 174.48kNm
Muy = 150.95kNm
Equivalent Moment
The Reinforcement in section is designed for the axial compressive load P u
and the equivalent moment given by the relation:
Mu =1.15

=1.15
Mu=265.32KNm
Pu/fckbD = 1392*103/20*600*600
=0.193
Mu/fckbD2 = 265.32*106/20*600*600*600
=0.0614
Non dimensional Parameters:
Refer Chart:44 of sp16(fy=415 N/mm2) and (d/D=0.10) and read out he value of:
p/fck =0.04
p=20*0.04 =0.8
Asc =(pbD/100) =0.8*600*600/100
=2880mm2
Provide 4 bars of 25mm diameter main bar and 4 bars of 20mm diameter as
distributor(Ast =3218 mm2)
P =(100*3218)/(600*600)
P=0.893
(p/fck) =0.893/20
=0.045

Refer chart -44 in SP16 and read out (Mux1/fckBd2) corresponding to the value of
(Pu/fkBd)= 0.193 and (p/fck)=0.045
(Mux1/fckBd2) =0.065
Mux1 =0.065*20*600*600*600
=280.80KNm
Due to symmetry,Mux1 =Muy1 =280.80KNm
Puz =[0.45fkAc + 0.75fyAS]
=(0.45*20)[(600*600)-3218]+[0.75*415*3218]
=4212.6KNm
Pu/Puz=1392/4212.6
=0.335
Hence,
n=1.3
Check for Safety under biaxial bending
[(Mux/Mux1) n +(Muy/Muy1) n]

=[(174.48/280.80)1.3 +(150.95/280.80)1.3]
=0.984<1
Hence the section is safe under biaxial bending.
Tie Reinforcement
Diameter greater

1. 12/4 = 3
2. 6 mm
Adopt 8 mm dia. Bars
Pitch of ties is least of
1. Least lateral dimension= 600 mm
2. 16 x diameter of bars = 192 mm
3. 48 times dia. of bars

= 384 mm

Adopt 200 mm of pitch


Adopt 8 mm dia bars
Pitch = 200 mm
Reinforcement Details:
Provide 4 bar of 25mm and 4 bars of 20mm diameter a longitudinal and 8mm
lateral ties at 200mm centers

You might also like