Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    ADQ13-Open Hole Logging (Sisemic Survey)

    Uploaded by

    Dian Sikumbang
    This document outlines the job safety analysis for an open hole logging task. It identifies potential hazards at each step such as dropped tools, pinch points, pressure under rams, and well control issues. It also lists controls to mitigate the hazards, such as ensuring tools are secured, personnel are clear of lifting equipment, pressure is bled off, and proper communication is established between crews. The overall purpose is to analyze safety for open hole logging operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    ADQ13-Open Hole Logging (Sisemic Survey)

    Uploaded by

    Dian Sikumbang
    33 views2 pages
    This document outlines the job safety analysis for an open hole logging task. It identifies potential hazards at each step such as dropped tools, pinch points, pressure under rams, and well control issues. It also lists controls to mitigate the hazards, such as ensuring tools are secured, personnel are clear of lifting equipment, pressure is bled off, and proper communication is established between crews. The overall purpose is to analyze safety for open hole logging operations.

    Original Description:

    oilfield

    Original Title

    ADQ13-Open Hole Logging (Sisemic Survey).doc

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the job safety analysis for an open hole logging task. It identifies potential hazards at each step such as dropped tools, pinch points, pressure under rams, and well control issues. It also lists controls to mitigate the hazards, such as ensuring tools are secured, personnel are clear of lifting equipment, pressure is bled off, and proper communication is established between crews. The overall purpose is to analyze safety for open hole logging operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    33 views2 pages

    ADQ13-Open Hole Logging (Sisemic Survey)

    Uploaded by

    Dian Sikumbang
    This document outlines the job safety analysis for an open hole logging task. It identifies potential hazards at each step such as dropped tools, pinch points, pressure under rams, and well control issues. It also lists controls to mitigate the hazards, such as ensuring tools are secured, personnel are clear of lifting equipment, pressure is bled off, and proper communication is established between crews. The overall purpose is to analyze safety for open hole logging operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    VICO INDONESIA

    JOB SAFETY ANALYSIS.

    RIG 453
    TASK NO Created OPEN HOLE LOGGING (SISEMIC SURVEY) 17 / 2 / 1997 TASK NO Review Date ADQ13 PAGE 1 OF 3 / / 19..

    NO. 1. RIG UP.

    STEP

    HAZARD DROPPED TOOLS (DOWN HOLE ) PINCH POINTS TOOLS OVERHEAD OPENING RAMS PRESSURE UNDER RAMS

    CONTROL CLOSE BLIND RAMS ENSURE HOLE COVER IN PLACE KEEP HANDS CLEAR DONT GET UNDER OVERHEAD LIFTS PERSONNEL CLEAR OF AREA WHEN OPENING RAMS. BLEED OFF VIA CHOKE - CONFIRM NO PRESSURE ENSURE BUSHINGS LOCKED. ENSURE HOLE FULL MONITOR DRINK RATE. CLOSE ANULAR - KILL WELL (IF UNSUCCESSFUL) CUT CABLE HAVE BOLT CUTTERS AND HYDRAULIC CUTTER READY DROP TOOL INTO HOLE CLOSE BLIND RAMS ENSURE MINIMUM OF 2 ON FLOOR AT ALL TIMES

    2.

    LOGGING

    BUSHINGS NOT LOCKED WELL CONTROL WELL SWABS ANULAR FAILS TO SEAL

    APPROPRIATE SAFETY CLOTHING AND EQUIPMENT MUST BE WORN AND USED

    VICO INDONESIA
    JOB SAFETY ANALYSIS.

    RIG 453
    TASK NO Created NO. OPEN HOLE LOGGING (SISEMIC SURVEY) 17 / 2 / 1997 STEP HAZARD TASK NO Review Date ADQ13 PAGE 2 OF 3 / / 19..

    CONTROL ESTABLISH ALARM SYSTEM (PA SYSTEM) P.O.O.H SLOWLY MONITER VOLUMES ESTABLISH COMMUNICATIONS BETWEEN DRILL FLOOR AND WIRELINE OPERATOR MAKE SURE NEW CREW UNDERSTAND CONTROLS NEEDED

    3.

    PULL OUT OF HOLE

    SWABBING

    4.

    CREW CHANGE

    LACK OF COMMUNICATIONS BETWEEN CREWS

    APPROPRIATE SAFETY CLOTHING AND EQUIPMENT MUST BE WORN AND USED

    You might also like