Interactive Form QW-485 PDF
Interactive Form QW-485 PDF
Procedure Specification Demonstrated Demonstration Welding Conditions Specification, Type, and Grade or UNS Number of Base Metal(s): to Specification, Type, and Grade or UNS Number of Base Metal(s): Base Metal P- or S- Number To Base Metal P- or S- Number Welding Process (es) used Plate Pipe (Enter Diameter, of Pipe or Tube) Groove Type (Single V, Double V, Single U, etc.) Initial Cleaning Method Backing (with/without) Filler Metal (SFA) Specification: Filler Metal or Electrode Classification Filler Metal or Electrode Trade Name Size of Consumable Electrode or filler metal Tungsten Electrode Classification and Size for GTAW Consumable Insert Classification and Size for GTAW or PAW Shielding Gas Composition and Flow Rate for GTAW, PAW, GMAW (FCAW) Preheat Temperature Position (1G, 2G,etc.) of Weld Progression (Uphill or Downhill) Interpass Cleaning Method: Measured Maximum Interpass Temperature : Approximate Deposit Thickness for Each Process or Electrode Type Current Type / Polarity (AC, DCEP, DCEN) Postweld Heat Treatment Time and temperature: Visual Examination of Completed Weld (QW-302.4) Bend Test (QW-302.1) Type Result Transverse Root and Face [QW-462.3 (a)] Type Result Date of Test Side [QW-462.2] Type Result
Thickness
Alternative Radiographic Examination Results: (QW-302.2) Specimens Evaluated by Title Welding Supervised by Title Mechanical testing by: Welders Name
We certify that the statements in this record are correct and that the test coupons were prepared, welded and tested in accordance with the requirements of Section IX of the ASME Code. Manufacturer or Contractor: By: Date: Demonstration Number