How To Create Compression Spring
How To Create Compression Spring
com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 1
Solidworks Tutorial #4: How to create compression
spring
Spring is a common mechanical parts, there is compression,
extension and torsion spring. Here is the basic design springs in
Solidworks
1. Click New, click Part, OK.
2. Click on Top Plane and click Sketch.
3. Click Circle , sketch a circle center at origin.
Click on Smart Dimension and
click on circle a dimension it to 0.5.
Click Exit Sketch.
This Solidworks tutorial
composes using the exact
format and delivery as
Solidworks 2008/2009
Tutorials : Beginner e-book.
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 2
4. Click on View Orientation and click on Isometric.
5. Click on Features>Curves>Helix and Spiral
and click on sketched circle as base diameter.
On its option set Define By: Height and Pitch, Constant
Pitch, Height: 2.0, Pitch: 0.2, Start Angle: 0, Clockwise
and .
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 3
6. Click on Top Plane and click Sketch,
Open Helix/Spiral tree [+] and click Sketch1
Click Sketch>Convert Entities
and click Exit Sketch.
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 4
7. Click on Sketch2, and click on
Features>Curves>Helix and Spiral
on its option set Define By: Pitch and Revolution, Pitch:
0.1, Reverse direction, Revolution: 2, Start Angle: 0,
Counterclockwise and .
8. Click the endpoint of top curve
and click Features>Reference Geometry>Plane.
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 5
On Selection select Parallel Plane at Point.
Open up part tree [+] and select Top Plane.
and .
9. Click on Plane1 and click Sketch,
now click Sketch1
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 6
Click Sketch>Convert Entities
and click Exit Sketch.
10. Click on Plane1 and click Hide.
11. Click on Sketch3, and click on
Features>Curves>Helix and Spiral
on its option set Define By: Pitch and Revolution, Pitch:
0.1, uncheck Reverse direction, Revolution: 2, Start
Angle: 0, Clockwise and .
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 7
12. Click Features>Curves>Composite Curve,
select all 3 Helix/Spiral sketches and .
13. Click on spring bottom endpoint
and click Features>Reference
Geometry>Plane.
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 8
14. The following steps are to show you how to create a plane
Normal To spring endpoint. Click on Composite Curve as a
reference curve.
and . Plane2 created.
15. Click on Plane2 and click Sketch.
Click Normal To.
Click Circle and sketch a circle center at endpoint of
Composite Curve,
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 9
Click on Smart Dimension and click on circle a
dimension it to 0.095. Click Exit Sketch.
16. Click Features>Swept Boss/Base, for
Profile and Path, click circle Sketch4 for its profile and click
CompCurve1 for its path and .
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 10
17. Save the part as Compression Spring and youre done!
and . Simple isnt it?
For more solidworks tutorials;
Go to www.solidworkstutorials.com
Love this tutorials?
Email it to your friends!
This is FREE solidworks tutorial is a complimentary
resource. You may distribute (I encourage you to share) this
tutorial as a free gift, post it on your website or include it as
part of package as long as the content is not changed and it
is delivered via this PDF file. The author and publisher
assume no responsibility or liability whatsoever on this
materials.
Solidworks Tutorial #4: How to create compression spring www.solidworkstutorials.com
(Free copy you can share this with your friends)
Solidworks Tutorial #4: How to create compression spring 11
User testimonial; I just want to thank you for writing an
excellent SolidWorks Tutorial for Beginners I purchase a
copy online and tried it. I have looked at other tutorials, and
your is the best.. The format is excellent..I was able to do all
the examples and usually by doing twice or several times it
was possible to have a better understanding of SolidWorks..
and appreciate it.. Luis Alvero