Scribd
Upload
1K views4 pages

DLT645 Serial

The ZPMC OPC Server supports communication with watt meters that use the DL/T645-1997 protocol over an RS485 serial connection. It can connect to devices via a PC's serial port or Ethernet card. The server software is compatible with various Windows operating systems and requires at least 512MB of RAM. It allows users to configure a new driver for the DL/T645-1997 protocol, create a device, specify the COM port settings and meter address.

Uploaded by

vietbkfet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

DLT645 Serial

The ZPMC OPC Server supports communication with watt meters that use the DL/T645-1997 protocol over an RS485 serial connection. It can connect to devices via a PC's serial port or Ethernet card. The server software is compatible with various Windows operating systems and requires at least 512MB of RAM. It allows users to configure a new driver for the DL/T645-1997 protocol, create a device, specify the COM port settings and meter address.

Uploaded by

vietbkfet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1/4

DL/T645 Serial

1.Overview
The ZPMC OPC Server supports communication with watt meters which use DL/T645-1997 protocol by RS485 Serial through Serial of your PC. See Configure and Connect with hardware for more details. This driver supports DL/T645-1997 for communication protocol. This driver is intended for use with the devices who follow DL/T645-1997 protocol. This application supports the following Microsoft Windows operating systems:
z z z z z

Windows 2003 Server* Windows XP* Windows 2000 Server Windows 2000 Service Pack 2 or higher Windows NT 4.0 Service Pack 6

The ZPMC OPC server requires, at a minimum, the following hardware:


z

z z

Intel Pentium III 400 MHz or equivalent processor that supports Microsoft's Windows operating system 512 MB installed RAM (256 MB free) 40 MB available disk space

Available Serial Port or Ethernet Card

2.Configure and Connect with hardware 1.The map below shows the ZPMC OPC Server connect to Intelligent Instrument by Ethernet

3.Configure ZPMC OPC Server


1.New a Driver, as following:

2/4

2.Select DLT 645 Serial as driver, as following:

3.Click finished to complete creating a new driver;

3/4

4.New a Device for the driver, as following:

5.Named the new device in Device Name textbox;

6.Input the COM Configuration;

4/4

7.Input the meters address. Click finished, ZPMC OPC Server configuration completed.

4.IO variable Addressing


See Multi-function watt-hour meter communication protocol DL/T 6451997 for more details.

You might also like