Scribd
Upload
58 views0 pages

Corolla

This document provides instructions for overhauling the front brake components of a Toyota Corolla, including removing the front wheel, draining the brake fluid, removing the front disc brake cylinder sub-assembly by disconnecting the flexible hose and removing bolts, removing the front disc brake pad kit by taking out the pads and anti-squeal shims, and removing additional front disc brake components like the pad support plates, cylinder slide pin, and bush dust boots.

Uploaded by

Andre Salandy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views0 pages

Corolla

This document provides instructions for overhauling the front brake components of a Toyota Corolla, including removing the front wheel, draining the brake fluid, removing the front disc brake cylinder sub-assembly by disconnecting the flexible hose and removing bolts, removing the front disc brake pad kit by taking out the pads and anti-squeal shims, and removing additional front disc brake components like the pad support plates, cylinder slide pin, and bush dust boots.

Uploaded by

Andre Salandy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 0

3201I--01

C80676
C68548
Disc Brake Cylinder Mounting
Bush Dust Boot
32--28
-- BRAKE FRONT BRAKE
140N COROLLA(186W) (RM821E)
FRONT BRAKE
OVERHAUL
1. REMOVE FRONT WHEEL
2. DRAINBRAKE FLUID
NOTICE:
Donotletbrakefluidremainonapaintedsurface. Washitoff immediately.
3. REMOVE FRONT DISC BRAKE CYLINDER
SUB--ASSY
(a) Removetheunionboltandgasketfromthediscbrakecyl-
inder, then disconnect the flexible hose.
HINT:
Gasket has 2 types: 2--peace type and 1--peace type.
(b) Hold the cylinder slide pin and remove the 2 bolts.
4. REMOVE DISC BRAKE PADKIT FRONT (PADONLY)
[ 04465/ 4705]
(a) Remove the 2 brake pads with anti--squeal shims.
(b) Remove the anti--squeal shimNo. 1 and anti--squeal shimNo. 2 fromthe each pad.
5. REMOVE FRONT DISC BRAKE PADSUPPORT PLATE
[ 47716/ 4705]
6. REMOVE FRONT DISC BRAKE PADSUPPORT PLATE
[ 47717/ 4705]
7. REMOVE FRONT DISC BRAKE CYLINDERSLIDE PIN
[ 47715A/ 4705]
(a) Remove the cylinder slide pins fromthe disc brake cylinder mounting.
8. REMOVE FRONT DISC BRAKE BUSHDUST BOOT
[ 47775/ 4705]
(a) Remove the 2bushdust boots fromthe disc brake cylin-
der mounting.
BACK TO CHAPTER INDEX
TO MODEL INDEX
PAGES FROM MANUAL ENGINE & CHASSIS RM821E
CONTINUED
To Alphabetical Index
To Sub Index

You might also like