Scribd
Upload
438 views2 pages

DMCO Output Boards Explained: Cross Reference

The document discusses DigitalMedia output boards (DMCO) for Crestron switchers. There are three types of DMCO boards: dual fiber output, dual CAT output with HDMI, and dual HDMI output with balanced analog audio. The DMCO boards are configured by their combinations and are installed into Crestron switchers in combinations of two boards per slot. Old DMCO part names are cross-referenced to new part names.

Uploaded by

Chetan Bhatt
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
438 views2 pages

DMCO Output Boards Explained: Cross Reference

The document discusses DigitalMedia output boards (DMCO) for Crestron switchers. There are three types of DMCO boards: dual fiber output, dual CAT output with HDMI, and dual HDMI output with balanced analog audio. The DMCO boards are configured by their combinations and are installed into Crestron switchers in combinations of two boards per slot. Old DMCO part names are cross-referenced to new part names.

Uploaded by

Chetan Bhatt
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DMCO Output Boards Explained

Cross Reference
Note: These part numbers are only for DM-MD8X8 switchers.

Old Names DMC-CATO-HD DMC-FO DMC-HDO DMC-FO-HD DMC-CATO

New Names DMCO-22 DMCO-11 DMCO-33 DMCO-13 Available while supplies last

Configuring the DMCO Boards


DigitalMedia output boards (DMCO) are configured by assembly. There are three types of boards; Dual Fiber, Dual CAT with HDMI, and Dual HDMI with Dual Balanced Analog Audio.

Type 1

Dual Fiber Output

Type 2

Dual CAT Output with HDMI

Type 3

Dual HDMI Output with Dual Balanced Analog Audio

Note: A Zero (0) in the part name corresponds to a blank slot. The DMCOs are configured through combinations of output boards. Each output board has two (2) outputs. The DM-MD8X8 can hold two (2) DMCO-XX (must use a 2-digit DMCO), while the DM-MD16X16 can hold two (2) DMCO-XXXX (must use a 4-digit DMCO), where the X is a placeholder for the board type (1, 2, 3 or 0).

DM-MD8x8

DM-MD16x16

Crestron Electronics, Inc. 15 Volvo Drive

Rockleigh, NJ 07647

800.237.2041

| crestron.com

All brand names, product names and trademarks are the property of their respective owners. 2009 Crestron Electronics, Inc

DMCO Output Boards Explained


DMCO Examples
Note: These part numbers are only for DM-MD8X8 switchers.

Note: A blank output board corresponds to the number 0 (zero).

Note:

Available DMCO configurations can be found on the DMCO product page or by using the online DigitalMediaTM Switcher Configuration Tool. Visit www.crestron.com/digitalmedia for more information.

Crestron Electronics, Inc. 15 Volvo Drive

Rockleigh, NJ 07647

800.237.2041

| crestron.com

All brand names, product names and trademarks are the property of their respective owners. 2009 Crestron Electronics, Inc

You might also like