FLR300

ENGINEERING DATA SHEET TIME DELAY RELAY 2 PDT, 2 AMP

Time delay relay (on operate, on release or repeat cycle timer) Fixed or adjustable timing delay Contact arrangement Power supply 2 PDT Direct current

PRINCIPLE TECHNICAL CHARACTERISTICS

Contacts rated at Weight Dimensions of case 2 Amps / 28 Vdc < 40 grams 44mm x 28.6mm x 13.3mm max

Tin plated hermetically sealed metal can.

APPLICABLE SOCKETS: S300 S302

CONTACT ELECTRICAL CHARACTERISTICS

Minimum operating cycles 100,000 cycles 100,000 cycles 500,000 cycles 100 cycles Contact rating per pole and load type resistive load inductive load (L/R=5ms) low level (30A/30mV max) resistive overload Load Current in Amps @28VdC 2 0.75 4 @115Vac/60-400Hz 0.3 -

NUMBERING SYSTEM
FLR300 - B 4 A 0.1s A 1 Basic series designation___________________| | | | | | | 1-Mounting Styles (A,B,C,D,J)______________________| | | | | | 2-Terminal Types (1,2,4)_______________________________| | | | | 3-Types Of Operation (A,B,C)__ ____________________________| | | | 4-Time range (1,2,3,4) or fixed time in s _______________________| | | 5-Temperature Range (A,B) ____________________________________________| | 6-Accuracy (1,2,3) ________________________________________________________|

Featuring LEACH power and control solutions www.esterline.com

AMERICAS 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 . . Tel: (01) 714-736-7599 Fax: (01) 714-670-1145

EUROPE 2 Rue Goethe 57430 Sarralbe France . . Tel: (33) 3 87 97 31 01 Fax: (33) 3 87 97 96 86

ASIA Units 602-603 6/F Lakeside 1 No.8 Science Park West Avenue Phase Two, Hong Kong Science Park Pak Shek Kok, Tai Po, N.T. Hong Kong Tel: (852) 2 191 3830 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Esterline Power Systems prior to choosing a component.

Date of issue: 3/06

- 57 -

Page 1 of 4

MOUNTING STYLES

FLR300

3.8

A A

28.6 MAX

ISO M3 B B : : ISO
C : : UNC UNC
4
0.15

1 12.7

J
12.3 MAX

0.5

0.15

M3 OR 4.40 UNC 2 B 3.8 12.3 MAX 35.7

0.15

CONTRASTING BEAD

13.3 MAX 26 MAX

35.5 36.7 44 MAX

35.5 36.7 44 MAX

44 MAX

Dimensions in mm Tolerances unless otherwise specified 0.25 mm

TERMINAL TYPES
1.57
0.03

1.57 5.08 2.54

0.03

5.08

2.54

1
7.6 6.9
0.2

2 2
1.3 7.9 MAX 2
0.1

4 4

FIXED FIXED PERIOD PERIOD

SILICON GASKET SHORE A 15-30

1.57

0.03

0.76

0.04

1.57

0.03

0.76

0.04

5.08

2.54

2.54

5.08

1 1

2
1.3
0.1

ADJUSTABLE ADJUSTABLE PERIOD PERIOD

7.6

6.9

0.2

7.9 MAX 4 2 SILICON GASKET SHORE A 15-30 6.6

-0.2

TIN PLATED PINS

SOLDER HOOKS

GOLD PLATED PINS

Date of issue: 3/06

- 58 -

Page 2 of 4

TYPES OF OPERATION

FLR300

28 V 28 0 V 0 V

POWER SUPPLY POWER SUPPLY

TIME
OUTPUT OUTPUT
DE - ENERGIZED DE-ENERGIZED

ENERGIZED ENERGIZED

CODE CODE A A :: TIME TIME DELAY DELAY ON ON OPERATE OPERATE

ENERGIZED ENERGIZED OUTPUT OUTPUT DE-ENERGIZED DE - ENERGIZED

CODE B : TIME DELAY DELAY CODE B ON ON RELEASE RELEASE

TIME
OUTPUT DE-ENERGIZED DE - ENERGIZED

TIME

TIME
CODE C C : REPEAT CYCLE CYCLE TIMER CODE (CYCLIC RATIO = ( CYCLIC RATIO = 1) 1)

ENERGIZED DE-ENERGIZED ENERGIZED DE - ENERGIZED

TIMING RANGE
ADJUSTABLE Range 1: 0.1 to 2.5 seconds Range 2: 0.4 to 10 seconds Range 3: 3.2 to 80 seconds Range 4: 25 to 625 seconds Rx = 356 * (T - to) Rx = 91.20 * (T - to) Rx = 11.38 * (T - to) Rx = 1.42 * (T - to) where R x in kohms T : desired time in seconds, to: time measured with R x = 0.

E xample to determine R x value for a T time of 10 seconds: Choose range 3; measure time with R x = 0 (for example : to = 3.1 s); substract to from 10 seconds (10s - 3.1s = 6.9s); calculate R x = 11.38 kohms/s (range 3) x 6.9s T heoretical resistance: R x = 78.5 kohms

GENERAL CHARACTERISTICS
Temperature range - Code A - Code B Operating Voltage Recycle Time Dielectric strength between all pins connected together and can Insulation resistance at 100 Vdc (same condition as above) Sinusoidal vibration Shock -55 C to +125 C -40 C to +85 C 18 to 32 Vdc (AIR norm 2021 E) less than or equal to 50 ms 750 V / 50 Hz greater than or equal to 100 M 20G / 10 to 2000 Hz 50G / 11 ms

Date of issue: 3/06

- 59 -

Page 3 of 4

ACCURACY
fixed period Code 3 Code 2 Code 1 10% 5% 3% 10% 5% 3% adjustable period Accuracy resistor Rx to choose 5% 100 ppm / C 2% 100 ppm / C 1% 50 ppm / C

FLR300

SCHEMATIC DIAGRAM/TERMINAL LAYOUT

FIXED FIXED PERIOD PERIOD

ADJUSTABLE ADJUSTABLEPERIOD PERIOD

B B A A

1 1

0V 0V 2 X2 X2 2

3 3

Y2 Y2 X1 X1 + POWER SUPPLY SUPPLY + POWER

B B A A

1 1

X2 X2

0V 0V 2 2

3
Y1 Y1

X1 X1
RX RX

+ POWER SUPPLY SUPPLY + POWER

1 1 B B A

X2 X2

2 2

3 3 B B
A

1 1 X2 X2

2 2

X1 X1

Y2 X1 X1

Y1 Y1

1 1 B B A A

X2 X2

2 2

3 3
B B

1 1 X2 X2

2 2

A A X1 X1 Y2 Y2 X1 X1 Y1 Y1

NOTES
1. Relays with B,C,D mounting and terminal 4 are compatible with socket families S300, SF300, S302, SF302... 2. Isolation spacer pads for PCB mounting available on request. 3. For other mounting styles or terminal types, please contact the factory.

Date of issue: 3/06

- 60 -

Page 4 of 4

S300, S301, S302

ENGINEERING DATA SHEET RELAY SOCKET 10 AMP
BASIC SOCKET SERIES DESIGNATION FOR:

Series M300 (DC Coil), M301 (DC Coil), M302 (DC Coil), FD300, FLS300, FLR300

GENERAL CHARACTERISTICS
Crimp tool contact #22 Insertion and extraction tool #22 Crimp tool contact #16 Insertion and extraction tool #16 Weight Temperature range M 22520/2-01 with turret M 22520/2-14. M 81969/14-01. M 22520/1-01 with turret M 22520/1-02 or MS 3191-1. M 81969/14-03 . 35g max. 70 C to +125 C. AMERICAS 6900 Orangethorpe Ave. P.O. Box 5032 Buena Park, CA 90622 . . Tel: (01) 714-736-7599 Fax: (01) 714-670-1145 EUROPE 2 Rue Goethe 57430 Sarralbe France . . Tel: (33) 3 87 97 31 01 Fax: (33) 3 87 97 96 86 ASIA Units 602-603 6/F Lakeside 1 No.8 Science Park West Avenue Phase Two, Hong Kong Science Park Pak Shek Kok, Tai Po, N.T. Hong Kong Tel: (852) 2 191 3830 Fax: (852) 2 389 5803

Featuring LEACH power and control solutions www.esterline.com

Data sheets are for initial product selection and comparison. Contact Esterline Power Systems prior to choosing a component.

Date of issue: 12/09

- 17 -

Page 1 of 4

TERMINAL LAYOUT
CODE A A S300 S300 CODE CODE D D S302 S302 CODE

S300, S301, S302

3 B A

X2

1 B A

X2

X1 Y1

X1 Y2

POSITION SEE CODE POSITION, TOLERANCE TOLERANCE SEE CODE B B FOR M300 RELAY RELAY FOR M300

POSITION, TOLERANCE TOLERANCESEE SEE CODE CODE B POSITION, FOR RELAY FOR M302 RELAY

CODE B CODE B S301 S301

15.24 10.16 5.08 3 5.08 B A X1 12.68 DEPTH 9 MM 2 X2 1 DETAIL 0.9 3.2

CODE C C S301 CODE S301

DETAIL 2.0 DEPTH 9 MM 0.9 3.2

MOUNTING HOLE HOLE LAYOUT LAYOUT MOUNTING

35.7
0.3 0.1

2 B A X1 28.2
0.3

14.1

X2

FOR M301 M301 RELAY, RELAY, FOR FOR K K COIL COIL FOR

FOR M301 M301 RELAY, FOR J FOR RELAY, FOR J COIL COIL

FOR HOLE CLEARANCE, CLEARANCE, FOR HOLE SEE HARDWARE CODE SEE HARDWARE CODE

MOUNTING HARDWARE
CODE 1 : 05-284-12
LOOSE UNC HARDWARE BOTTOM MOUNT
2.4 MAX

CODE 2 : 05-284-00
LOOSE METRIC HARDWARE TOP MOUNT

CODE 3 : 05-284-07
LOOSE METRIC HARDWARE TOP MOUNT

MOUNTING TORQUE NUT 4/40:0,45 0,1 Nm NUT 10-32:1,2 MAX :3,6 mm

MOUNTING TORQUE:0,45 0,1 Nm :3,6 mm

MOUNTING TORQUE:0,45 0,1 Nm :3,6 mm

CODE 6 : 05-284-13
LOOSE UNC HARDWARE BOTTOM MOUNT TOP MOUNT

CODE 7 : 05-284-15
LOOSE METRIC HARDWARE TOP MOUNT

1.2

1.2

MOUNTING TORQUE:0,45 0,1 Nm MOUNTING HOLE:3,6 mm MOUNTING HOLE:3,6 mm

MOUNTING TORQUE:0,45 0,1 Nm FOR RELAYS WITH CODE B TERMINALS MOUNTING HOLE:3,6 mm

CODE 8 : 05-284-20
LOOSE UNC STUDS MIL-S-12883/41 - EDIT C BOTTOM MOUNT TOP MOUNT

CODE 8 : 05-284-20
FIXED UNC STUDS PER MIL-S-12883/41 - EDIT C BOTTOM MOUNT TOP MOUNT

2.4

2.4 MAX

1.2

4.0 MAX

4.0

MOUNTIONG TORQUE: NUT 4/40:0,45 0,1 Nm - NUT 10-32: 1,2 MAX MOUNTING HOLE: 5,3 mm MOUNTING HOLE: 3,6 mm

MOUNTING TORQUE: NUT 4/40:0,45 0,1 Nm - NUT 10-32: 1,2 MAX MOUNTING HOLE: 5,3 mm MOUNTING HOLE: 3,6 mm

Date of issue: 12/09

- 18 -

Page 2 of 4

3.2 MAX

3.2

WIRE INSULATION DIAMETER FOR SEAL TO GROMMET

Code A Recommended for contact code 2 contact code 8 Dia: 1.2 ......2.4mm Code B Recommended for contact code 3 contact code 9 Dia: 0.8 ......1.6mm

S300, S301, S302

CONTACT SIZE AND STYLE

Y1-Y2 Crimpend to accomodate AWG22 Code 2 05 911 00 Crimpend to accomodate AWG16-18-20 Code 3 05 911 10 Crimpend to accomodate AWG20-22-24

05 912 00 (for product code 2+3) Contact mating end dia 0.8mm 31 036 00 (for contact code 8+9) MIL-C-39029/92-531 Bin Code colour bands or Bin Code numbering on crimpside Contact mating end dia 0.8mm Contact mating end #16 Code 8 30 315 00 Crimpend to accomodate AWG16-18-20 MIL-C-39029/92533 Bin Code colour bands or Bin Code numbering on crimpside Contact mating end #16 Contact mating end #16 Contact mating end #16 Code 9 30 315 10 Crimpend to accomodate AWG20-22-24 MIL-C-39029/92534 Bin Code colour bands or Bin Code numbering on crimpside

Code 0

Without contacts

SOCKET NUMBERING SYSTEM S300 A 1 A 2 1-Basic socket designation________________________| | | | | 2-Terminal Layout_____________________________________| | | | 3-Mounting Hardware_______________________________________| | | 4-Grommet to seal on wire insulation__________________________| | 5-Contact size and style___________________________________________|

Date of issue: 12/09

- 19 -

Page 3 of 4

MS/LEACH CROSS PART NO. AND MATING RELAYS

MS - Number LEACH P/N Contacts to accomodate wire #
-01 S300-A6A2 S300-A6B3 S301-B6A2 S301-C6A2 16-18-20 20-22-24 16-18-20 16-18-20 Loose terminals Above/below panel mounting

S300, S301, S302

Applicable for relays
M300-D4A /-L/-N/-B/-C M 301-D4F/-K M 301-D4E/-J

MIL-S-12883/41

-04 -02 -03

MS - Number LEACH P/N Contacts to accomodate wire #

-11 S300-A1A2 S300-A1B3 S301-B1A2 S301-C1A2 16-18-20 20-22-24 16-18-20 16-18-20 Loose terminals below panel mounting

Applicable for relays

M300-D4A /-L/-N/-B/-C M 301-D4F/-K M 301-D4E/-J

MIL-S-12883/41B

-14 -12 -13

MS - Number LEACH P/N Contacts to accomodate wire #

-11S -14S S300-A8A8 S300-A8B9 S301-B8A8 S301-C8A8 S302-D8A8 S300-A9A8 S300-A9B9 S301-B9A8 S301-C9A8 S302-D9A8 16-18-20 20-22-24 16-18-20 16-18-20 16-18-20 16-18-20 20-22-24 16-18-20 16-18-20 16-18-20 Fixed terminals Above/below panel mounting Loose terminals Above/below panel mounting

Applicable for relays

M300-D4A /-L/-N/-B/-C M301-D4F/-K M301-D4F/-J M302-D4A/ -L/-N/-B/-C M300-D4A /-L/-N/-B/-C M 301-D4F/-K M 301-D4E/-J M 302-D4A/ -L/-N/-B/-C

MIL-S-12883/41C

-12S -13S -15S -16S -19S

MIL-S-12883/41C

-17S -18S -20S

Date of issue: 12/09

- 20 -

Page 4 of 4