Scribd
Upload
21K views7 pages

Hard Copy Devices

The document discusses different types of printers categorized as either hard copy or soft copy output devices. It describes impact printers like dot matrix, daisy wheel, and line printers that work by striking pins against an ink ribbon, as well as non-impact printers like laser and inkjet printers. Impact printers tend to be noisier but can print multipart forms, while non-impact printers are quieter but cannot print forms. The document provides details on the printing mechanisms and characteristics of each printer type.

Uploaded by

abinayanalli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
21K views7 pages

Hard Copy Devices

The document discusses different types of printers categorized as either hard copy or soft copy output devices. It describes impact printers like dot matrix, daisy wheel, and line printers that work by striking pins against an ink ribbon, as well as non-impact printers like laser and inkjet printers. Impact printers tend to be noisier but can print multipart forms, while non-impact printers are quieter but cannot print forms. The document provides details on the printing mechanisms and characteristics of each printer type.

Uploaded by

abinayanalli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 7

HARD COPY DEVICES

Output that is readable by the user can be categorized into two categories:

• Hard copy - Hard copy is a relatively permanent form of output that can
be read immediately or stored for later use, such as paper. Printers are the
most common hard copy output devices.
• Soft copy - Soft copy is a transient form of output, for example, text on a
screen display. It is lost when the computer is turned off unless it is saved
in the main memory or on a disk.

The quality of the pictures obtained from a device depends on dot size and
the number of dots per inch, or lines per inch, that can be displayed. To produce
smooth characters in printed text strings, higher-quality printers shift dot positions
so that adjacent dots overlap.

Printers are also classified by the following characteristics

Quality of type: The output produced by printers is said to be either letter


quality (as good as a typewriter), near letter quality, or draft quality. Only daisy-
wheel, ink-jet, and laser printers produce letter-quality type. Some dot-matrix
printers claim letter-quality print, but if you look closely, you can see the
difference.

Speed: Measured in characters per second (cps) or pages per minute (ppm), the
speed of printers varies widely. Daisy-wheel printers tend to be the slowest,
printing about 30 cps. Line printers are fastest (up to 3,000 lines per minute). Dot-
matrix printers can print up to 500 cps, and laser printers range from about 4 to 20
text pages per minute.

Impact or non-impact: Impact printers include all printers that work by


striking an ink ribbon. Daisy-wheel, dot-matrix, and line printers are impact
printers. Non-impact printers include laser printers and ink-jet printers. The
important difference between impact and non-impact printers is that impact
printers are much noisier.
A plotter is another hard copy output device that reproduces graphic
images on paper using a pen that is attached to a movable arm. Pen plotters can
draw complex line art, including text, but do so very slowly because of the
mechanical movement of the pens. When computer memory was very expensive,
and processor power was very limited, this was often the fastest way to produce
color high-resolution vector-based artwork, or very large drawings efficiently.

Graphics: Some printers (daisy-wheel and line printers) can print only text.
Other printers can print both text and graphics.

Fonts : Some printers, notably dot-matrix printers, are limited to one or a few
fonts. In contrast, laser and ink-jet printers are capable of printing an almost unlimited
variety of fonts. Daisy-wheel printers can also print different fonts, but you need to
change the daisy wheel, making it difficult to mix fonts in the same document.
Impact & Non-impact printers

Refers to a class of printers that work by banging a head or needle against an ink ribbon
to make a mark on the paper. Impact printers include dot-matrix printers, daisy-wheel
printers, and line printers. In contrast, laser and ink-jet printers are non-impact printers.
The distinction is important because impact printers tend to be considerably noisier than
non-impact printers but are useful for multipart forms such as invoices.

Impact printers

Of all the printer types, however, impact printers have relatively low consumable costs.
Ink ribbons and paper are the primary recurring costs for impact printers. It press formed
character faces against an inked ribbon onto the paper.

Types of impact printers

• Daisy wheel printer : A type of printer that produces letter-quality type. A


daisy-wheel printer works on the same principle as a ball-head typewriter. The
daisy wheel is a disk made of plastic or metal on which characters stand out in
relief along the outer edge. To print a character, the printer rotates the disk until
the desired letter is facing the paper. Then a hammer strikes the disk, forcing the
character to hit an ink ribbon, leaving an impression of the character on the
paper. You can change the daisy wheel to print different fonts.
Daisy-wheel printers cannot print graphics, and in general they are noisy and slow,
printing from 10 to about 75 characters per second. As the price of laser and ink-jet
printers has declined, and the quality of dot-matrix printers has improved, daisy-wheel
printers have become obsolete.
• Dot matrix printer: A type of printer that produces characters and illustrations
by striking pins against an ink ribbon to print closely spaced dots in the
appropriate shape. Dot-matrix printers are relatively expensive and do not
produce high-quality output. However, they can print to multi-page forms (that
is, carbon copies), something laser and ink-jet printers cannot do.

Compared to laser and ink-jet printers, dot-matrix printers are notorious for making a
racket.

• Line printer: A high-speed printer capable of printing an entire line at one time.
A fast line printer can print as many as 3,000 lines per minute. Because of the
nature of the print mechanism, line printers are much faster than dot-matrix or
daisy-wheel printers; The disadvantages of line printers are that they cannot print
graphics, the print quality is low, and they are very noisy.
Non-Impact printers

Non­impact printers are much quieter than impact printers as their printing 
heads do not strike the paper. A type of printer that does not operate by striking a
head against a ribbon. The term non-impact is important primarily in that it distinguishes
quiet printers from noisy (impact) printers

Types of non-impact printers

• Laser printer: A type of printer that utilizes a laser beam to produce an image
on a drum. The light of the laser alters the electrical charge on the drum
wherever it hits. The drum is then rolled through a reservoir of toner, which is
picked up by the charged portions of the drum. Finally, the toner is transferred
to the paper through a combination of heat and pressure. The standard of print 
is very good and laser printers can also produce very good quality 
printed graphic images too. 

• Ink-jet printers: A type of printer that works by spraying ionized ink at


a sheet of paper. Magnetized plates in the ink's path direct the ink onto
the paper in the desired shapes. Ink-jet printers are capable of producing
high quality print approaching that produced by laser printers.
A typical ink-jet printer provides a resolution of 300 dots per inch, although
some newer models offer higher resolutions. In general, the price of ink-jet printers is
lower than that of laser printers. However, they are also considerably slower. Another
drawback of ink-jet printers is that they require a special type of ink that is apt to
smudge on inexpensive copier paper.
HARD COPY DEVICES

Submitted by,

N.
Abinaya
III BCA-‘A’

71302.

Printers Mechanism

You might also like