Scribd
Upload
131 views3 pages

8051 VER 1.0 Programmer

This document describes an 8051 programmer that can program, read, verify, write lock bits, erase, and blank check Atmel 8051 microcontrollers. It uses a parallel interface and supports the Intel Hex format. Key features include supporting various Atmel 8051 series chips and communicating via RS-232. It can be used as both a standalone programmer and interfaced with a computer.

Uploaded by

0sandeep
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views3 pages

8051 VER 1.0 Programmer

This document describes an 8051 programmer that can program, read, verify, write lock bits, erase, and blank check Atmel 8051 microcontrollers. It uses a parallel interface and supports the Intel Hex format. Key features include supporting various Atmel 8051 series chips and communicating via RS-232. It can be used as both a standalone programmer and interfaced with a computer.

Uploaded by

0sandeep
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

8051 Programmer

Data Sheet
Overview: This is a Simple to use & low cost, yet powerful flash microcontroller programmer for Atmel (8051) AT89Cxx 40pin, AT89Cxxxx 20pin and AT89Sxx series devices. It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable. This is parallel mode high voltage programmer.

8051 Programmer
Data Sheet Introduction
When code is compiled into a windows program, its turned into "binary" which means its not human-readable (which is tough for machines to understand), instead it is machine-readable. Under windows, these programs (often called applications or executable) are often named ending with .exe (for example notepad.exe or winword.exe), on Macs, they are often named ending with .App (although the Finder hides it). For microcontrollers, binary files end in .hex (short for Intel Hex Format) There are other formats possible, but this is pretty much standard. Your compiler will generate a .hex file from code, and then all you have to do is transfer that .hex program to the chip!

Features
Programmer for 8051 Architecture Supports Atmel series 89c51, 89c52, 89c55, 89s51, 89s52, 89s53, 89s8252 Adapter for programming 89C2051, 1051, 4051 Communication Rs232 Supports Intel Hex Format For USB Connection use USB to UART converter

Used to Program Wide range of 8051 series Programmers You may also use this programmer as a standalone serial programmer that can be used to conveniently program 8051 series microcontrollers.

Advantages
2 UART makes it possible to increase functionality and

connectivity. ARM JTAG connector provides external connectivity. Fast I2C and CAN supported. Extended ports to use them with other external devices or modules

Toll Free: 1800 102 4578; +91-80-23100221; +918050024578 Global Logica Software Technologies (Make My Product) #118, MIG 2nd Stage, KHB Colony, 80ft Road, Basaveshwarnagar, Bangalore-560079, e-mail: [email protected], Website: www.makemyproduct.in

8051 Programmer

Application

Block Diagram

SV1 RES K4 8051 Programmer

MISO SCK GND

RS232

Computer Computer
8051 Programmer

JP2

VCC

+5 V / VCC

Device Image

2
Toll Free: 1800 102 4578; +91-80-23100221; +91-8050024578; Fax: +91-80-23100221 Global Logica Software Technologies (Make My Product) #118, MIG 2nd Stage, KHB Colony, 80ft Road, Basaveshwarnagar, Bangalore-560079 E-mail: [email protected], Website: www.makemyproduct.in

Target Board

MOSI

You might also like