Scribd
Upload
484 views1 page

VLSI Design Syllubus

The document provides an overview of the topics covered in a VLSI design course across 8 units. The units cover introduction to IC technologies like MOS, CMOS, BiCMOS and nano technologies. Basic electrical properties of MOS and BiCMOS circuits. VLSI design flow, design rules and layout. Gate level design including logic gates, driving large capacitive loads. Data path subsystems like shifters, adders, multipliers. Array subsystems including SRAM, DRAM, ROM. Semiconductor integrated circuit design including PLAs, FPGAs, CPLDs and standard cells. CMOS testing principles and techniques.

Uploaded by

Harold Wilson
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
484 views1 page

VLSI Design Syllubus

The document provides an overview of the topics covered in a VLSI design course across 8 units. The units cover introduction to IC technologies like MOS, CMOS, BiCMOS and nano technologies. Basic electrical properties of MOS and BiCMOS circuits. VLSI design flow, design rules and layout. Gate level design including logic gates, driving large capacitive loads. Data path subsystems like shifters, adders, multipliers. Array subsystems including SRAM, DRAM, ROM. Semiconductor integrated circuit design including PLAs, FPGAs, CPLDs and standard cells. CMOS testing principles and techniques.

Uploaded by

Harold Wilson
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

VLSI DESIGN

UNIT I INTRODUCTION : Introduction to IC Technology MOS, PMOS, NMOS, CMOS & Bi-CMOS technologiesOxidation, Lithography, Diffusion, Ion implantation, Metallisation, Encapsulation, Probe testing, Integrated Resistors and Capacitors, CMOS nano Technology UNIT II BASIC ELECTRICAL PROPERTIES : Basic Electrical Properties of MOS and BiCMOS Circuits: Ids-Vds relationships, MOS transistor threshold Voltage, gm, gds, figure of merit o; Pass transistor, NMOS Inverter, Various pull ups, CMOS Inverter analysis and design, Bi-CMOS Inverters. UNIT III VLSI CIRCUIT DESIGN PROCESSES : VLSI Design Flow, MOS Layers, Stick Diagrams, Design Rules and Layout, 2 m CMOS Design rules for wires, Contacts and Transistors Layout Diagrams for NMOS and CMOS Inverters and Gates, Scaling of MOS circuits, Limitations of Scaling. UNIT IV GATE LEVEL DESIGN : Logic Gates and Other complex gates, Switch logic, Alternate gate circuits, Basic circuit concepts, Time Delays, Driving large Capacitive Loads, Wiring Capacitances, Fan-in and fan-out, Choice of layers UNIT V DATA PATH SUBSYSTEMS: Subsystem Design, Shifters, Adders, ALUs, Multipliers, Parity generators, Comparators, Zero/One Detectors, Counters. UNIT VI ARRAY SUBSYSTEMS: SRAM, DRAM, ROM, Serial Access Memories, Content Addressable Memory. UNIT VII: SEMICONDUCTOR INTEGRATED CIRCUIT DESIGN : PLAs, FPGAs, CPLDs, Standard Cells, Programmable Array Logic, Design Approach, Parameters influencing low power design. UNIT VIII CMOS TESTING : CMOS Testing, Need for testing, Test Principles, Design Strategies for test, Chip level Test Techniques, System-level Test Techniques, Layout Design for improved Testability. TEXTBOOKS: 1. 2. 3. Essentials of VLSI circuits and systems Kamran Eshraghian, Eshraghian Dougles and A. Pucknell, PHI, 2005 Edition. VLSI Design- K.Lal Kishore, V.S.V. Prabhakar, I.K.International,2009 CMOS VLSI Design- A circuits and systems perspective, Neil H.E Weste, David Harris, Ayan Banerjee, pearson, 2009

REFERENCES: 1. Chip Design for Submicron VLSI: CMOS Layout & Simulation, - John P. Uyemura, Thomson Learning. 2. Introduction to VLSI Circuits and Systems - John .P. Uyemura, JohnWiley, 2003. 3. Modern VLSI Design - Wayne Wolf, Pearson Education, 3rd Edition, 1997. 4. VLSI Technology S.M. SZE, 2nd Edition, TMH, 2003.

You might also like