Students Project - Pro/ENGINEER Wildfire

Create all the components of the Butterfly Valve shown in Figure 1 and Figure 2 and then assemble them. The dimensions for the various components are given in Figure 3 through Figure 11. Assume the missing dimensions for the components.

Figure 1 Butterfly Valve assembly

Figure 2 Inside view of the Butterfly Valve

Figure 3 Solid model of the Body

Figure 4 Top view of the Body

Figure 5 Left side view of the Body

Figure 6 Sectioned front view of the Body

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Project 1

Students Projects - Pro/ENGINEER Wildfire

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 7 Top view of the Arm

Figure 9 Dimensions of the Shaft

Figure 8 Sectioned front view of the Arm

Figure 10 Dimensions of the Retainer

Figure 11 Dimensions of the Plate, the Nut, and the Screw

Students Project - Pro/ENGINEER Wildfire

Create different components of the Double Bearing assembly and then assemble them as shown in Figure 12. Figure 13 shows the exploded view of the assembly. The dimensions of various components are given in Figure 14 to Figure 18.

Figure 12 Double Bearing assembly

Figure 13 Exploded view of Double Bearing assembly

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Project 2

Students Projects - Pro/ENGINEER Wildfire

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 14 Top view of the Cap

Figure 16 Top view of the Base

Figure 15 Front view of the Cap

Figure 17 Front view of the Base

Figure 18 Dimensions of the Bushing and the Bolt

Students Project - Pro/ENGINEER Wildfire

In this tutorial you will create all the components of the Wheel Support assembly and then assemble them together as shown in Figure 19. The exploded view of the assembly is shown in Figure 20. The dimensions of the components are shown in Figure 21, to Figure 25.

Figure 19 Wheel Support assembly

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Project 3

Students Projects - Pro/ENGINEER Wildfire

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 20 Exploded view of the Wheel Support assembly

Figure 21 Dimensions of the Base

Figure 22 Dimensions of the Support

Students Project - Pro/ENGINEER Wildfire

Figure 23 Front view of the Wheel

Figure 24 Sectioned side view of the Wheel

Figure 25 Dimensions of the Shoulder Screw, Bolt, Nut, Bushing, and Washer

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Projects - Pro/ENGINEER Wildfire

Students Project 4
For getting training on high-end CAD/CAM packages, visit www.cadcim.com
Create all the components of the Bracket Support assembly and then assemble them as shown in Figure 26. The Bill of Material is shown in Figure 27 and exploded view of the assembly is shown in Figure 28. The dimensions of the components are given in Figure 28 to Figure 33.

Figure 26 Pulley Support assembly

Figure 27 Parts list for the Pulley Support assembly

Students Project - Pro/ENGINEER Wildfire

Figure 28 Exploded view of the Pulley Support assembly

Figure 29 Dimensions of the Pulley

Figure 30 Dimensions of the Bushing

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

10

Students Projects - Pro/ENGINEER Wildfire

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 31 Left side view of the Bracket

Figure 32 Sectioned front view of the Bracket

Figure 33 Dimensions of the Washer, Cap Screw, Turn Screw, and Nut