Scribd
Upload
233 views5 pages

Ht640 Programming Guide

The document provides instructions for programming different versions and features of an HT640 radio: Version A has all features, Version B disables US/Canada modes and weather channels, Version C further removes a scrambler, and Version D allows programming custom channel lines. Programming the version involves pressing buttons at power on to cycle through options. Private channels can be programmed by selecting a channel number, settings, and storing. Specific channels can also be enabled in Version D mode for customization.

Uploaded by

milen65
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
233 views5 pages

Ht640 Programming Guide

The document provides instructions for programming different versions and features of an HT640 radio: Version A has all features, Version B disables US/Canada modes and weather channels, Version C further removes a scrambler, and Version D allows programming custom channel lines. Programming the version involves pressing buttons at power on to cycle through options. Private channels can be programmed by selecting a channel number, settings, and storing. Specific channels can also be enabled in Version D mode for customization.

Uploaded by

milen65
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

7.

Programming
Versions: The HT640 can be programmed to operate as four different versions: A All features available. (Typical default for UK sales) B USA and Canadian modes not available, No WX channels. (Typical default for European sales) C USA and Canadian modes not available, No WX channels, no scrambler D Programmable channel line up. (Ideal for commercial applications) PROGRAMMING PROCEDURE To change version:Press 16/9 and A/B and switch power on - switch off as soon as display flashes. Press 16/9 and MEM and switch power on hold buttons in until the version (A,B,C or d) appears on the display. Using up/down buttons select desired version and press MEM to store. Switch radio off to complete. The version of the radio has now been set. This can be changed back at any time. To program private channels, maximum 36: Press WX and MEM and switch power on - switch off as soon as display flashes. Press WX and MEM and switch power on this time holding buttons until 01 is displayed. Using the up/down buttons select which private channel position you want to program. Press 16/9 and select desired channel, select power level using H/L button on side (HLselectable, L-fixed low power, or TX inhibit), simplex/duplex is selected using the scan button. Store using the MEM button. Press 16/9 to select next private channel position if needed and repeat above. Switch radio off to complete. NOTE: In international mode P01 is programmed with M2 (161.425MHz) if no other channel has been programmed in this position. All private channels are prefixed P and located between channels 01 & 88. To enable channels in d mode:Ideal for customers who requires just a limited number of channels. For example channel 15 & 37 only. Again, the radio can be programmed back to a,b,c versions at any time. Press 16/9 and SCAN and switch power on - switch off as soon as display flashes. Press 16/9 and SCAN and switch power on this time holding buttons until 16 is displayed. Select desired channels pressing MEM to store. Switch radio off to complete. Note: Private channels can be programmed in the same way as the other versions.

23GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGEntel UK -LondonG

You might also like