Scribd
Upload
51 views29 pages

Beams From Engessam Modified

The document provides design details for a rectangular cross-section subjected to pure bending moment. It includes the design inputs, calculations to determine the required steel area and number of bars, and the final design values. The final design uses 7 diameter 18 mm bars, with 4 bars in the first row and 3 bars in the second row. Additional details provided include the required steel area for stirrup hangers and shrinkage bars.

Uploaded by

Livian Teddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
51 views29 pages

Beams From Engessam Modified

The document provides design details for a rectangular cross-section subjected to pure bending moment. It includes the design inputs, calculations to determine the required steel area and number of bars, and the final design values. The final design uses 7 diameter 18 mm bars, with 4 bars in the first row and 3 bars in the second row. Additional details provided include the required steel area for stirrup hangers and shrinkage bars.

Uploaded by

Livian Teddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 29

Design Rect. Sec.

Subjected TO pure Bending Moment

3.00E+06

kg.cm

250

Kg/cm2

3600

Kg/cm2

30

Cm

70

Cm

0.44

0.194

0.0125

get

65

From Table (4-1) Design Aids

Check of single or double R.F.T sec.

You must design as

4098250

Kg.cm

Design As Single R.F.T. Sec.

Click To Design As Single R.F.T Sec.

Click to get final design as single R.F.T

Cm

Click To Design As Double R.F.T Sec.

Click to get design in table

Design Rect. Sec.

Inputs
Mu

Fcu

Fy

Cmax./d

Rmax.

max.
Design

Check of single or do

Calculate Mu max.

Mumax.

You must design as

Click To Design As Single R.F.T S

OR

Click to get final design as single R

OR

Click to get design in table

Click to return to main page

114.3487

Cm

15.65133

Cm

Take "a" logic value from a1or a2

15.65133408

Cm

6.5

so, a =

22.88

16.75997025

15

cm2

15.65133408

Cm

you choose

bars

18

mm

Max.no of bars in one row =

rows

Asact.=

17.81

cm2

Asmax.=

24.38

cm2

Asmin.=

5.958

cm2

No. Of bars in row #1 =

No. Of bars in row #2 =

No. Of bars in row #3 =

Asmin<Asact.<Asmax. Safe

Final Design

30

Cm

30

Cm

70

Cm

Asact.

17.8128303

Cm

Use

18

No. Of bars in row #1 =

No. Of bars in row #2 =

No. Of bars in row #3 =

Stirrup hangers steel =

3.56256607

Cm

Use

10

Use

12

Shrinkage bars

Use

10

/30cm

Use

12

/30cm

1-max. no of rows =3

2-min. no of bars in one row = 2 bars

3-max. diameter =25 mm

4-min. diameter of bar = 12 mm

5- ........

........ 5-

6-stirrups hangers stell=0.2 Asact

7-shrikage bars(in case t70cm)=0.08.Asact

Design Results in table

)Spacings bet.shrikage bars row(Cm

No. of groups shrinkage bars

)Stirrup hangers steel(Cm

30

3.35199405

2 diameter 10 is accepted

10

OR

5
OR

12

2 diameter 12 is accepted

" "n 4 8

2.5

x1
x2

calculate "a" value


1676.3

217913

x1.a-x2.a+Mu=0

Take "a" logic value

114.35

Cm

15.651

Cm

Input

check of "a" value

check of amin.

amin.

use a

check of amax.

amax.

Safe

Calculate As

As

n1

16.76

16.762

16.76

n2

n3

n4

n5

Check of n and

No.of rows of main steel

Check of As

Safe
Safe

Click to return to main page

Final Des

Asact.

Use

No. Of bars in row #1

No. Of bars in row #2

No. Of bars in row #3

Stirrup hangers steel

OR

Shrinkage

OR

Remarks

1-max.

2-min. no of ba

3-max. di

4-min. diame

5- ........

5- ........

6-stirrups han

7-shrikage bars(in c

Design Results in table


Asreq.(Cm)

b(Cm)

16.75997025

30

t(Cm) Asact.(Cm) no. of bars (n)

70

16.95

15

Stirrup hangers s

Diameter (mm)

12

3.351994

OR
Use
18.09

16
OR

OR
Use
17.78

18

OR
19

22

OR
19.6

25

n=

13

bars

Diam.()=

18

mm

max. no. of bars in one row =

bars

2.5

no.of rows =

rows

no. of bars in row #1=

bars

Choose n ,diameter

no. of bars in row #1=

bars

no. of bars in row # 2=

bars

no. of bars in row # 3 =

bars

114.3486659

15.65133408

1.13

2.01

2.54

3.8

4.9

Click To return main page

You might also like