Scribd Logo
Upload

Welcome to Scribd!

  • 189 views

    Asme - Shell External Pressure REV A

    Uploaded by

    Pohn Myint Han
    The document summarizes the design of a cylindrical pressure vessel shell made of SA 515 GR 70 steel. It provides the key design parameters including the material, design pressure and temperature, corrosion allowance, outer diameter, required thickness, equivalent length, and thickness provided. It also includes calculations for the maximum allowable working pressure and stiffening ring design.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Asme - Shell External Pressure REV A

    Uploaded by

    Pohn Myint Han
    189 views1 page
    The document summarizes the design of a cylindrical pressure vessel shell made of SA 515 GR 70 steel. It provides the key design parameters including the material, design pressure and temperature, corrosion allowance, outer diameter, required thickness, equivalent length, and thickness provided. It also includes calculations for the maximum allowable working pressure and stiffening ring design.

    Original Description:

    asme

    Original Title

    Asme_ Shell External Pressure REV A

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the design of a cylindrical pressure vessel shell made of SA 515 GR 70 steel. It provides the key design parameters including the material, design pressure and temperature, corrosion allowance, outer diameter, required thickness, equivalent length, and thickness provided. It also includes calculations for the maximum allowable working pressure and stiffening ring design.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    189 views1 page

    Asme - Shell External Pressure REV A

    Uploaded by

    Pohn Myint Han
    The document summarizes the design of a cylindrical pressure vessel shell made of SA 515 GR 70 steel. It provides the key design parameters including the material, design pressure and temperature, corrosion allowance, outer diameter, required thickness, equivalent length, and thickness provided. It also includes calculations for the maximum allowable working pressure and stiffening ring design.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Design of Pressure Vessel

    Design of Cylindrical Shell under External Pressure

    Material Design Pressure Design Temperature Corrosion Allowance Shell O/D Required Thickness Equivalent Length (L) L / Do Ratio Do / t Ratio Geometric Chart Factor From Fig. UGO-28.0 Material Chart Factor Fig No. CS 2 Maximum Allowable Working Pressure (Pa) Provided Thickness

    MATL P Temp CA Do tr Le 141.73 / 80 80 / 0.2 A

    SA 515 GR 70 0.21375 185 0.24 80.00 0.20 141.73 1.7717 406.4000 9.8209E-05 psi F inch inch inch inch 0.015 85 6 2032 5 3600 kg / cm C mm mm mm mm

    1413.743297

    psi

    99.2100559

    MAWP

    4.64

    psi

    0.32549231 kg / cm

    tp

    0.63

    inch

    16

    mm

    Stiffening Ring Calculations Ring Section Web Width Flange Width Thickness Area Provided M.I. I Flat Bar 7.87 0.00 0.50 3.94 20.34 inch2 inch4 200 0 12.7 2540 mm mm mm mm

    4 8466666.67 mm

    B A Required M.I.

    3 x (P x Do) 4 x [t + (As/Le)]

    30.42859367 6.73348E-05 1.838805056

    psi inch4
    4 765368.45 mm

    You might also like