Scribd
Upload
399 views2 pages

Checklist of Support Design

The document provides a checklist for creating a bill of materials (BOM) for pipe supports and secondary steel structures with 17 items: 1. Specify the format and source for the pipe support BOM. 2. Include corrosion-resistant materials like Corflex or stainless steel depending on temperature. 3. Include spring displacement, operating loads, and preset loads from software. 4. Manually include anchor bolts and check for turnbuckles, snubber positions, and special designs. 5. Manually include sliding and tribomat plates as required and note trapeze and clamp lengths. 6. Check support numbers, models, and types against the support list. 7. Verify quantities and

Uploaded by

Sakshi Agrawal
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
399 views2 pages

Checklist of Support Design

The document provides a checklist for creating a bill of materials (BOM) for pipe supports and secondary steel structures with 17 items: 1. Specify the format and source for the pipe support BOM. 2. Include corrosion-resistant materials like Corflex or stainless steel depending on temperature. 3. Include spring displacement, operating loads, and preset loads from software. 4. Manually include anchor bolts and check for turnbuckles, snubber positions, and special designs. 5. Manually include sliding and tribomat plates as required and note trapeze and clamp lengths. 6. Check support numbers, models, and types against the support list. 7. Verify quantities and

Uploaded by

Sakshi Agrawal
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Checklist of Lisega BOM 1. Format of Lisega BOM, refer PEB. 2.

Create lisega BOM from LICAD for better accuracy. 3. Include Corflex (Temp < 200C) or stainless steel sheet (Temp > 200C) for stainless steel pipes corflex are available as per standard widths. 4. Include anchor bolts manually HILTI or SPITFIX as agreed on the project. 5. Check spring Displ (mm), OPE loads (kN), Preset loads (kN/hanger). Displacement OPE movement in vertical direction. + For UP - For DOWN OPE Loads HOT Load in kN from LICAD F(H) Preset load From LICAD F (k) value. Must be per spring. 6. Check turnbuckle included in the Rod hanger or not. 7. For Snubbers provide the preset position in the Remarks column. 8. For special design supports include into the Remarks column e.g. direction of force and value. 9. Include PTFE sliding plate and Tribomat plate manually in the BOM as required. 10. Wherever PTFE or tribomat plate is required include SS plate manually in the BOM. SS plate to be shop welded below the clamp base. 11. Mention trapeze hanger length, vertical riser clamp length in the BOM. 12. Check the support BQ number along with PDMS model. 13. Type of support should be mentioned as per support list. 14. Check quantity of support component as required.

Checklist of Secondary steel BOM 1. 2. 3. 4. Check the beam sections used should be as agreed during starting of project. Check the plate thickness; prefer to use standard plate thickness. Do not model in PDMS the secondary steel in proposal. Check all plates are covered in the sec steel BOM. Plates are not coming directly from PDMS. 5. Remove lugs plate from the secondary steel BOM. 6. Format of secondary steel BOM should be as follow. 7. Overview of all steel & plates dimensions, weight and quantity.

You might also like