Commview Technical Specifications: Network Monitor and Analyzer
Commview Technical Specifications: Network Monitor and Analyzer
Promiscuous mode:
10/100/1000 Mbps Ethernet Token Ring Non-promiscuous mode: Dial-up Adapter Wireless Ethernet 802.11 a/b/g/n/ac Loopback Interface Operating Systems Windows XP / Vista / 7 / 8 or Windows Server 2003 / 2008 / 2012 (both 32- and 64-bit versions).
System Requirements
Available Filters By Ethernet protocol By IP protocol By MAC address By IP address (including wildcards) By port By text By process Advanced Boolean rules than allow creating complex formulas.
the OS being used. Recommended: 1600 MHz processor, 1 GB of RAM, 50 MB disk space for program files, extra disk space may be required if captured packets are logged to the disk. Depending on the traffic volume and usage mode, the requirements may be higher. Supported Capture File Formats CommView native format (NCF) Network Instruments Observer Network General Sniffer for DOS Network General Sniffer for Windows Microsoft NetMon WildPackets EtherPeek WildPackets AiroPeek Wireshark/Tcpdump (pcap) Wireshark/ Pcapng Plain ASCII
Copyright 1998-2013 TamoSoft. All Rights Reserved. No part of this document can be reproduced, duplicated or modified in any form, including electronic means, without the express written permission of TamoSoft. CommView is a registered trademark of TamoSoft. All other product names and trademarks are the property of their respective holders.
Phone (USA): +1 866 582 6675 Phone (UK): +44 (0) 2070 602 806 Fax: +64 3 310 2413
[email protected]
WWW.TAMOS.COM