Endress+Hauser: Industrial Protecting Tubes Omnigrad TA Series
Endress+Hauser: Industrial Protecting Tubes Omnigrad TA Series
Endress+Hauser: Industrial Protecting Tubes Omnigrad TA Series
FROM PIPE
General The Endress+Hauser thermowell lines cover a worldwide oriented measurement problem solving. To meet customer necessities, including different technical standards according to international/country/corporate requirements, is our commitment. The designs shown above are representative of the basic styles available.
Industrial thermowells are made from bar stock and from pipe of different diameters. The process connection can be threaded, flanged or socket weld-in. A variety of thermowell materials is available in order to cover a complete range of applications: heat treating, glass, paper, petroleum, power, chemical for example.
Endress+Hauser
Nothing beats know-how
C97EV002.CDR
C97EV002.CDR
General
Thermowell design has a great importance in obtaining accurate temperature measurements. Factors as length, thickness and mass velocity have to be carefully balanced to produce adeguate well strength as well as accuracy and response of temperature measurement. Immersion length The distance from the tip of the well to the underside of the thread/flange/socket weld-in is the immersion length. For optimum accuracy, this length should be long enough to allow the entire temperature sensitive part of the element to project into the medium being measured. For a correct temperature measurement the thermowell immersion length must be 20 times its diameter. When calculating the immersion length, the dead length to pass through walls, sockets etc. must also be taken into account.
Loading capacity of wells In many cases well failures are not due to the effect of pressure and temperature only. Inadequate strength of well can be due to improper choice of shape or material. Less familiar, and more dangerous, are the vibration effects to which wells are subjected. Fluid, flowing by the well, forms a turbulent wake (called the Von Karman trail) which has definite frequency based on the thermowell shape and process operating conditions. The standard DIN43763 as well as ASME PTC 19.3 -1974 (ANSI PTC19.3 1974) gives the formulas to enable the user to determine if a selected well is strong to withstand specific application conditions of temperature, pressure, velocity and vibrations.
Straight/Conical or Tapered Wells Tapered shank wells provide greater strength for the same sensitivity. The higher strength-to-weight ratio gives these wells a higher natural frequency than equivalent length straight/conical shank wells, permitting operation at higher fluid velocity.
Test capabilities
Hydrostatic test E+H and customer reference standards hydrostatic tests are available "on request" (i.e. Dow Chemical, Du Pont, ENI, Esso, Montedison, Shell, etc.). Two main testing methods, at ambient temperature, are available with issuing of certificates: internal and external pressure test.
Liquid penetrant test and others Additional tests such as liquid penetrant examination, ultrasonic tests, radiographic inspection are available with issuing of inspection test report certificate.
Materials
In general, the thermowell material used is governed mainly by the corrosion conditions. Occasionally the material strength rather than the corrosion resistance determines the thermowell material selection. For this reason wells are also available in several grades of stainless steel and carbon steel, Monel, Hastelloy C and Inconel 600. The high polish option for all stainless steel thermowells provides maximum corrosion resistance. Since the various materials specified for thermowells cannot meet the requirements of all possible service conditions, the material that is best
suited to the application shall be selected by the user. The thermowell material can be specified according to others installed plant units. In the case of corrosive media it is advisable to establish the suitability of a material by testing it under service conditions, since often only slight impurities are sufficient to alter the effect which such media may have on the material. For reference guide herein you find a table with the metallurgic characteristics and the application of the most commonly used materials.
$16, AISI316
0HWDOOXUJLF FKDUDFWHULVWLFV - corrosion resistance - good resistance at very low temperatures - corrosion resistance - good resistance at very low temperatures - less sensitization in welded plate fabrication in the range 450850C for short time periods - corrosion resistance - good resistance at very low temperatures -less sensitization in welded plate fabrication in the range 450850C for long time periods - corrosion resistance - good resistance at very high temperatures - better scaling resistance DIN 43763
$SSOLFDWLRQ
x2CrNiMo17132
1.4404
AISI316L
x6CrNiMoTi17122
1.4571
AISI316Ti
acetone asphalt fatty acids food & beverage hydrogen peroxide paper petroleum processing petrochemical industries soaps and detergents steam sulphur
AISI446 -
2.4816
Hastelloy C
2.4819
exit flues glass - good resistance in oxidizing and heat treatment reducing atmospheres high corrosive environment UNS N 06600 -high corrosion resistance at very high temperature environment high temperatures oxidation and reducing atmospheres superheaters waste heat boilers - excellent corrosion resistance in chemical industries aggressive fluids oxidizing and reducing atmospheres as Alum (Potassium or Sodium), - corrosion resistance in welded Calcium Bisulphate, Calcium UNS N 10276 junctions Chloride, Chromic Acid, Citric Acid, - excellent resistance to pitting and to Copper Chloride, Ferric Chloride, stress corrosion cracking Hydrobromic Acid
Uhiyr
Heavy duty
Endress+Hauser offers a complete range of standardized thermowells. Heavy duty thermowell line covers a very large amount of industrial standards as DIN, Dow Chemical, Du Pont, ENI, ME U, etc. Two different types of thermowell construction are available: from drilled bar stock and from pipe. The process connection can be threaded, flanged or socket weld-in.
Herein you can find a summary technical description of heavy duty thermowells (see Technical Information references for more details).
7$
42 mm
7$
34 mm
1/2" NPT
7$
35 mm
3/4" NPT
7$
35 mm
1/2" NPT
ENI BAR 1
7$
48 mm
3/4" NPT
ENI MAS 1
7$
48 mm
1/2" NPT
7$
27 mm
1/2" NPT
3/4" NPT
7$
27 mm
7$
36 mm
1/2" NPT
1" NPT
7$
Uhiyr!
36 mm
1/2" NPT
1" NPT
%RWWRP VKDSH
Straight
Tapered
Conical
7$
34 30 mm
Socket weld-in
7$
29 25 mm
Socket weld-in
7$
24 20 mm
Socket weld-in
DIN 43763-Form D DIN 43763-D1S type DIN 43763-D2S type DIN 43763-D4S type DIN 43763-D5S type Dow Chemical standard G6D-7002-00 (1995) Du Pont SR6T Du Pont SR7T
7$
18 mm
M14 (x1.5)
Socket weld-in
7$
34 30 mm
Flanged weld
7$
Uhiyr"
29 25 mm
Flanged weld
7$
3/4" NPT
7$
1/4"-3/8"-1/2"
1" NPT
7$
1/4"-3/8"-1/2" 3/4"-1"
1 1/2" NPT flanged or welded mounting bushing flanged or welded mounting bushing
ENI TUB 1 ENI TUB 2 ENI TUB 3 ENI TUB 4 ME U819.05 9 type
7$
1/4"-1/2"-3/4"
1/2" NPT 3/4" NPT 1/2" NPT 3/4" NPT G 1/2" G 3/4" Male
7$
Uhiyr#
1/2"-3/4"
%RWWRP VKDSH
Straight
Tapered
Conical
Conical Tapered
Medium duty
Medium duty thermowell line covers DIN standards and complete market requirements. Thermowells available are made from pipe. The process connection can be threaded, flanged or sanitary fittings. Herein you can find a summary technical description of medium and light duty thermowells (see Technical Information references for more details).
7$
912
no
7$
913
no
7$
913
flanged
7$
Uhiyr$
913
M24 (x1.5)
%RWWRP VKDSH
Straight
Tapered
TA series is particularly designed to complete E+H line of temperature sensors which includes EEx-d and heavy duty thermometers (requiring a separate thermowell). To easy select the right coupling you can use the following selection table.
7KHUPRZHOO WR WKHUPRPHWHU FRQQHFWLRQ 7\SH Male 767 (( [ G 1/2" NPT 767 (( [ G 767 767 767 767 1/2" NPT G 1/2" 767 767
Female
1/2" NPT
1/2" NPT
G 1/2"
7$ Female 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$ 7$
Uhiyr%
1/2" NPT -
G 1/2"
1/2" NPT -
Male
1/2" NPT 3/4" NPT 1/2" NPT 3/4" NPT 1/2" NPT
Female
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
1/2" NPT
Supplementary documentation
TA10 thermowell Technical Information TI151T/02/en TA11 thermowell Technical Information TI195T/02/en TA12 thermowell Technical Information TI196T/02/en TA13 thermowell Technical Information TI238T/02/en TA14 thermowell Technical Information TI234T/02/en TA530 thermowell Technical Information TI189T/02/en TA531 thermowell Technical Information TI192T/02/en TA532 thermowell Technical Information TI193T/02/en TA533 thermowell Technical Information TI194T/02/en TA540 thermowell Technical Information TI166T/02/en TA541 thermowell Technical Information TI188T/02/en TA550 thermowell Technical Information TI153T/02/en TA551 thermowell Technical Information TI237T/02/en TA555 thermowell Technical Information TI154T/02/en TA556 thermowell Technical Information TI155T/02/en TA557 thermowell Technical Information TI156T/02/en
TA558 thermowell Technical Information TI157T/02/en TA559 thermowell Technical Information TI158T/02/en TA560 thermowell Technical Information TI159T/02/en TA561 thermowell Technical Information TI176T/02/en TA565 thermowell Technical Information TI160T/02/en TA566 thermowell Technical Information TI177T/02/en TA570 thermowell Technical Information TI161T/02/en TA571 thermowell Technical Information TI178T/02/en TA572 thermowell Technical Information TI179T/02/en TA573 thermowell Technical Information TI187T/02/en TA574 thermowell Technical Information TI207T/02/en TA575 thermowell Technical Information TI162T/02/en TA576 thermowell Technical Information TI163T/02/en Welding capabilities Technical Information TI167T/02/en Liquid penetrant test Technical Information TI168T/02/en Hydrostatic test Technical Information TI169T/02/en
Export Division Endress+Hauser Instruments International GmbH + Co. P.O. Box 2222 D-79574 Weil am Rhein Germany Tel. (7621) 975-02 Tx 7-73-926 Fax (7621) 9-75-345
Endress+Hauser
Iuvtirhxu
03.97/MT