0% found this document useful (0 votes)
154 views15 pages

DSL-2750U Bridge Mode Setup

This document provides instructions for setting up a DSL-2750U router in bridge mode. It describes connecting the power adapter, connecting an Ethernet LAN cable from the router to a PC, and accessing the router's web GUI by entering its default IP address of 10.0.0.2 in a browser. The username and password are listed as "admin". Setup instructions are then given to select bridging as the WAN protocol in the internet setup page of the router's web interface.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
154 views15 pages

DSL-2750U Bridge Mode Setup

This document provides instructions for setting up a DSL-2750U router in bridge mode. It describes connecting the power adapter, connecting an Ethernet LAN cable from the router to a PC, and accessing the router's web GUI by entering its default IP address of 10.0.0.2 in a browser. The username and password are listed as "admin". Setup instructions are then given to select bridging as the WAN protocol in the internet setup page of the router's web interface.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

DSL-2750U Bridge Setup

POWER ADAPTER CONNECTION

POWER UP your Business

Power Adapter Connection

Plug the 3-Pin Power Supply/ Lightning Protection unit into the wall outlet and then connect the other end of it (12VDC IN)
POWER UP your Business

LAN CONNECTION

POWER UP your Business

LAN Connection

Connect the Ethernet LAN Cable to any (yellow) port on the Router and connect the other end to the LAN port of the PC
POWER UP your Business

CONNECTING TO THE UNIT VIA WEB GUI

POWER UP your Business

Connecting to the unit via Web GUI

How to login to Unit using the Web GUI


1. Go to your Internet Explorer or Default Browser. 2. In your URL field, type the Default IP (10.0.0.2) of router. 3. A login page will appear and you will be prompted for a Username and Password these are both admin

Connecting to the unit via Web GUI

Username: Password:

admin admin

Connecting to the unit via Web GUI


If your username and password details are correct, you will be taken to the Home Screen from where you can navigate your way around.

HOW TO SETUP BRIDGING


Unlike Routing which relies on the DSL 2750U Router to handle inspection, authentication and examination, Bridging relies on another device (mostly a PC) with more advanced inspection, authentication and examination ability to provide these features.

POWER UP your Business

How to setup Bridging


In the left navigation bar, select Internet Setup

How to setup Bridging


Tick the WAN Setup Interface and click Edit.

How to setup Bridging

Scroll down to Connection Type and select Bridging as the Protocol to user

How to setup Bridging

After youve selected Bridging, click next

How to setup Bridging


Click Apply to save settings.

You might also like