Scribd Logo
Upload

Welcome to Scribd!

  • 430 views

    COMMNG-ELEC-043 HT Motor Precommissioning

    Uploaded by

    santoshkumar
    This document provides a checklist and test report for commissioning an HT motor that is part of a 5x660MW power project in Mundra, India. It outlines 26 check points to test the motor's nameplate details, insulation resistance, winding resistance, polarity, high voltage withstand capability, and stability of the motor differential protection. The checklist verifies proper installation and functioning of the motor, cables, controls, and protection systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    COMMNG-ELEC-043 HT Motor Precommissioning

    Uploaded by

    santoshkumar
    430 views6 pages
    This document provides a checklist and test report for commissioning an HT motor that is part of a 5x660MW power project in Mundra, India. It outlines 26 check points to test the motor's nameplate details, insulation resistance, winding resistance, polarity, high voltage withstand capability, and stability of the motor differential protection. The checklist verifies proper installation and functioning of the motor, cables, controls, and protection systems.

    Original Description:

    ele

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a checklist and test report for commissioning an HT motor that is part of a 5x660MW power project in Mundra, India. It outlines 26 check points to test the motor's nameplate details, insulation resistance, winding resistance, polarity, high voltage withstand capability, and stability of the motor differential protection. The checklist verifies proper installation and functioning of the motor, cables, controls, and protection systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    430 views6 pages

    COMMNG-ELEC-043 HT Motor Precommissioning

    Uploaded by

    santoshkumar
    This document provides a checklist and test report for commissioning an HT motor that is part of a 5x660MW power project in Mundra, India. It outlines 26 check points to test the motor's nameplate details, insulation resistance, winding resistance, polarity, high voltage withstand capability, and stability of the motor differential protection. The checklist verifies proper installation and functioning of the motor, cables, controls, and protection systems.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    PRECOMMISSIONING CHECK LIST AND TEST REPORT - HT MOTOR


    1. LOCATION 2. DESIGNATION : :

    3. NAME PLATE DETAILS : MAKE POWER VOLTAGE : : :

    FULL LOAD CURRENT : SERIAL NO. MODEL NO. FREQUENCY COS EFFICIENCY IP SPEED CONNECTION INSULATION CLASS FRAME SIZE ROTOR TYPE AMB.TEMP. NO. OF START DUTY BEARING DE/NDE : : : : : : : : : : : : : :

    4. MOTOR SPACE HEATER : POWER RATING : VOLTAGE RATING RESISTANCE VALUE : : OHMS (Applied Voltage : V)

    INSULATION RESISTANCE .

    SEPCO-III

    Adani Project

    Adani Commissioning Page 1 of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    CURRENT MEASURED HEATER OPERATION

    : : : : : : : : : : : : : :

    5. SWITCHBOARD NAME & FEEDER NO. FOR HT MOTOR 6. BREAKER TYPE 7. BREAKER STARTER TYPE 8. MOTOR POWER CABLE SIZE 9. MOTOR CONTROL CABLE SIZE 10. MOTOR ANTI CONDENSATION HEATER CABLE SIZE 11.EARTHING CABLE / STRIP SIZE 12.MOTOR TERMINALS TIGHTNESS 13.OUTDOOR MOTOR CANOPY 14. LOCAL CONTROL STATION INSTALLATION 15. FIELD AMMETER AS PER THE CT SPECIFICATION 16. PANEL AMMETER AS PER THE CT SPECIFICATION

    17. LOCAL CONTROL STATION EARTHING INSTALLATION : 18. ELECTRICAL CLEARANCE TO THE BODY :

    19. HT MOTOR RTD VALUE ( FOR Winding / Bearing) : ( RTD VALUE AT AMBIENT TEMPERATURE ) BEARING TEMPERATURE GAUGE READING AT AMBIENT TEMPERATURE 1) DRIVING END : 2) NON DRIVING END : TERMINAL RESISTANCE TERMINAL WINDING BEARING NO. VALUE NO. Rph DRIVING END

    RESISTANCE VALUE

    SEPCO-III

    Adani Project

    Adani Commissioning Page 2 of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    Yph

    NON DRIVING END

    Bph

    20. INSULATION RESISTANCE VALUE OF MOTOR :

    Megger Make : Megger Sl.no : Voltage Rating of Megger :S.NO 1. 2. REFERENCE U1 V1 + W1 + EARTH V1 U1 + W1 + EARTH

    5 kV
    R15 R60 R600 POLARISATION INDEX = R600 / R15

    SEPCO-III

    Adani Project

    Adani Commissioning Page 3 of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    3.

    W1 U1 + V1 + EARTH

    21. ROTOR INSULATION RESISTANCE TEST :

    Megger Make :. Megger Sl.no : Voltage Rating of Megger ..V.


    S.NO 1. REFERENCE IR VALUE

    22. WINDING RESISTANCE TEST : ( microohms / milliohms / ohms ) U1 U2 V1 V2 W1 W2

    23. POLARITY TEST : S.NO 1. DESCRIPTION U1 U2 V1 V2 W1 W2

    24. HIGH VOLTAGE TEST : THIS TEST WILL BE CONDUCTED, ONLY IF RECOMMENDED BY MANUFACTURER / VENDOR. VOLTAGE APPLIED : 10kV (AC ). TIME DURATION : 60 SECONDS. S.NO 1. 2. 3. REFERENCE U1 EARTH V1 EARTH W1 EARTH EARTHED V1 + W1 EARTH W1 + U1 EARTH U1 + V1 EARTH LEAKAGE CURRENT (milliamps) REMARK

    SEPCO-III

    Adani Project

    Adani Commissioning Page 4 of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    25. CHECK LIST S.NO 1.

    Check List
    Check that motor base frame ( solo plate ) is properly grouted / bolted to the foundation. Check that motor is firmly bolted to the base frame. Check that motor is free to rotate by hand , without any abnormal sound. Check the condition of grease in motor bearings. Check continuity of earthing up to earth riser / grid. Check Continuity / IR value proper termination at both ends for following points. Power cable (Including Phase Indication) Space heater cable. Local start/stop station cable. Check that Motor / Drive is clearly labelled. Check for cleanliness of Motor & its terminal box. Check Local start / stop station functionally upto HT Feeder. Check that Motors and push button stations in hazardous are designed for the same. Check that Cable glands are properly installed and terminals covers are properly closed. Direction of motor from driving end. Check speed switch(if provided) upto HT Feeder. Check Space Heater operation from HT feeder.

    Status o.k / not o.k

    Remarks

    2.

    3.

    4. 5. 6. 6.1 6.2 6.3 7. 8. 9. 10. 11. 12. 13. 14.

    SEPCO-III

    Adani Project

    Adani Commissioning Page 5 of 6

    COMMISSIONING PROCEDURE COMMNG / ELEC / 043

    PROJECT : 5 x 660MW Mundra Power Project.

    26. CHECK STABILITY OF MOTOR DIFFERENTIAL PROTECTION: Current Measured in Motor Differential Relay. (i) When Current is injected B/W Uphase & Vphase.Bypassing the Uphase & Vphase winding by putting the loop across the winding. Description Phase Side Neutral Side I d Differential Current I r Restraint Current Uph Vph Wph 3Io

    -----

    (ii) When Current is injected B/W V phase & W phase. Bypassing the V phase & W phase winding by putting the loop across the winding. Description Phase Side Neutral Side I d Differential Current I r Restraint Current Uph Vph Wph 3Io

    -----

    SEPCO-III

    Adani Project

    Adani Commissioning Page 6 of 6

    You might also like