Scribd
Upload
75 views4 pages

CH 2 Eigrp: CCNP Commands

This document contains configuration examples for various CCNP routing commands related to EIGRP, OSPF, route redistribution, and BGP. It shows how to configure EIGRP parameters like manual summarization, default routes, authentication, and timers. For OSPF, it demonstrates configuring metrics, bandwidth, authentication, priority, virtual links, stub areas, and hello/dead intervals. Examples are also given for redistributing routes between different routing protocols like EIGRP, OSPF, RIP, and BGP. Route filtering using access lists and route maps is illustrated as well.

Uploaded by

محمد الصنومي
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views4 pages

CH 2 Eigrp: CCNP Commands

This document contains configuration examples for various CCNP routing commands related to EIGRP, OSPF, route redistribution, and BGP. It shows how to configure EIGRP parameters like manual summarization, default routes, authentication, and timers. For OSPF, it demonstrates configuring metrics, bandwidth, authentication, priority, virtual links, stub areas, and hello/dead intervals. Examples are also given for redistributing routes between different routing protocols like EIGRP, OSPF, RIP, and BGP. Route filtering using access lists and route maps is illustrated as well.

Uploaded by

محمد الصنومي
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CCNP COMMANDS

CH 2 EIGRP
manual
summarization.

R3(config)# interface Serial 0/0/1


R3(config-if)# ip summary-address eigrp 100 192.168.0.0 255.255.224.0

Default Route
Advertisement
Using a Static Route
and Route
Redistribution for
an ISR
Observe equal-cost
load balancing.

R1(config)# router eigrp 100


R1(config)# redistribute static

default network
advertisement.

R1(config)# ip default-network 172.31.0.0

Authentication
link authentication.

R1# conf t
R1(config)# key chain EIGRP-KEYS
R1(config-keychain)# key 1
R1(config-keychain-key)# key-string cisco
R1(config)# interface serial 0/0/0
R1(config-if)# ip authentication key-chain eigrp 1
EIGRP-KEYS
R1(config-if)# ip authentication mode eigrp 1 md5

Manipulate EIGRP
timers.

R1# conf t
R1(config)# interface serial 0/0/0
R1(config-if)# ip hello-interval eigrp 1 2
R1(config-if)# ip hold-time eigrp 1 8

R3(config)# interface S0/0/0


R3(config-if)# no ip route-cache
R3(config-if)# interface S0/0/1
R3(config-if)# no ip route-cache



( ISP

)




2

1
AS
EIGRP

CH 3 OSPF
cost

R1(config)# interface FastEthernet 0/0


R1(config-if)# ip ospf cost 50

bandwidth

R4(config)#int s0/0/0
R4(config-if)#bandwidth 64

authentication

R4(config)#interface Serial0/0/0
R4(config-if)#ip ospf authentication
R4(config-if)#ip ospf authentication-key cisco
R4(config-if)#ip ospf authentication message-digest
R4(config-if)#ip ospf message-digest-key 1 md5 cisco

Eng: Abdullah Hussein Mohammed Thabet


authentication

priority

R1(config)# interface FastEthernet 0/0


R1(config-if)# ip ospf priority 10
R2(config)# interface FastEthernet 0/0
R2(config-if)# ip ospf priority 5
R1(config)# interface loopback 1
R1(config-if)# ip ospf network point-to-point

virtual-link

R2(config)# router ospf 1


R2(config-router)# area 23 virtual-link
192.168.103.1
R3(config)# router ospf 1
R3(config-router)# area 23 virtual-link 10.1.2.1

Stub area

R2(config)# router ospf 1


R2(config-router)# area 23 stub

totally
stubby area.

R2(config)# router ospf 1


R2(config-router)# area 23 stub no-summary

Default routing

R1(config)# router ospf 1


R1(config-router)# default-information originate
always

Hello & dead Time

EAST(config)# interface FastEthernet 0/0


EAST(config-if)# ip ospf hello-interval 5
EAST(config-if)# ip ospf dead-interval 15


DR
BDR
R1 is DR and R2
is BDR





32


192.168.103.1

10.1.2.1 R3
2





23






0.0.0.0


CH 4 Redistrebution
R3(config-router)# router ospf 1
R3(config-router)# redistribute rip subnets metric 30


ospf
ospf
rip

R3(config-router)# router ospf 1


R3(config-router)# redistribute rip subnets
R3(config-router)# default-metric 30

rip
ospf

R1(config)# router ospf 1


R1(config-router)# redistribute eigrp 100 subnets metric-type 1

Eng: Abdullah Hussein Mohammed Thabet

Tow way

R1(config)# router ospf 1


R1(config-router)# default-metric 30
R1(config-router)# redistribute eigrp 100 subnets metric-type 1

R1(config)# router rip


R1(config-router)# redistribute ospf 1 metric 3

R1(config)# router eigrp 100


R1(config-router)# redistribute ospf 1 metric 10000 100 255 1 1500
R1(config-router)#

R1(config)# router eigrp 100


R1(config-router)# default-metric 10000 100 255 1 1500
R1(config-router)# redistribute ospf 1
R1(config)# access-list 1 permit 172.21.16.18 0.0.0.0
R1(config)#
R1(config)# route-map MY-ROUTE-MAP permit 10
R1(config-route-map)# match ip address 1
R1(config-route-map)# set ip next-hop 172.30.3.20
R1(config-route-map)#
R1(config-route-map)# interface S0/0/0
R1(config-if)# ip policy route-map MY-ROUTE-MAP

R1(config)# access-list 23 permit 10.1.0.0 0.0.255.255


R1(config)# access-list 29 permit 172.16.1.0 0.0.0.255
R1(config)# access-list 37 permit 10.0.0.0 0.255.255.255
R1(config)#
R1(config)# route-map REDIS-RIP permit 10
R1(config-route-map)# match ip address 23 29
R1(config-route-map)# set metric 500
R1(config-route-map)# set metric-type type-1
R1(config-route-map)#
R1(config-route-map)# route-map REDIS-RIP deny 20
R1(config-route-map)# match ip address 37
R1(config-route-map)#
R1(config-route-map)# route-map REDIS-RIP permit 30
R1(config-route-map)# set metric 5000
R1(config-route-map)# set metric-type type-2
R1(config-route-map)#
R1(config-route-map)# router ospf 10
R1(config-router)# redistribute rip route-map REDIS-RIP subnets
R1(config-router)#

Eng: Abdullah Hussein Mohammed Thabet


one way

ospf
rip

R1(config-route-map)# router rip


R1(config-router)# redistribute ospf 10 metric 5 route-map OSPFinto-RIP
R2(config)# access-list 7 permit 172.16.0.0 0.0.255.255
R2(config)#
R2(config)# router eigrp 1
R2(config-router)# distribute-list 7 out Serial0/0/0
R2(config-router)#

prefix-list

R1(config)# ip prefix-list TEN-ONLY permit 172.16.10.0/24 ge 17 le


24
R1(config)# router bgp 65000
R1(config-router)# aggregate-address 172.16.0.0 255.255.0.0
R1(config-router)# neighbor 10.1.1.1 remote-as 65001
R1(config-router)# neighbor 10.1.1.1 prefix-list TEN-ONLY out
R1(config-router)# exit

Eng: Abdullah Hussein Mohammed Thabet


ospf
Rip

172.16.0.0
s0/0/0

You might also like