This document provides specifications for sizing a pressure relief valve. It lists the mass flow rate, relief load conditions, and flow parameters. Given these inputs, it calculates the required relief area as 0.460441 in^2. Based on the effective orifice area from standard tables, a 1-1/2G3 valve is selected with an actual relieving rate of 12154 kg/hr.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document provides specifications for sizing a pressure relief valve. It lists the mass flow rate, relief load conditions, and flow parameters. Given these inputs, it calculates the required relief area as 0.460441 in^2. Based on the effective orifice area from standard tables, a 1-1/2G3 valve is selected with an actual relieving rate of 12154 kg/hr.
This document provides specifications for sizing a pressure relief valve. It lists the mass flow rate, relief load conditions, and flow parameters. Given these inputs, it calculates the required relief area as 0.460441 in^2. Based on the effective orifice area from standard tables, a 1-1/2G3 valve is selected with an actual relieving rate of 12154 kg/hr.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document provides specifications for sizing a pressure relief valve. It lists the mass flow rate, relief load conditions, and flow parameters. Given these inputs, it calculates the required relief area as 0.460441 in^2. Based on the effective orifice area from standard tables, a 1-1/2G3 valve is selected with an actual relieving rate of 12154 kg/hr.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 3
PSV-Tag No.
Sized based on . Mass Flow 24521 lb/hr Normal 11125.68 kg/hr Relief Load 11125.68 kg/hr Flow conditions at relief k Ratio of specific heats P cf critical flow nozzle pressure (psia) P 1 Upstream relieving pressure (psia) Set Pressure 8273.71 kPag 10% Factor 9101.081 kPag 9086.381 kPaA = 1317.87 psia k(Cp/Cv) 1.21 Pcf 741.3489 psia Downstream pressure 1654.742 kPag 1640.042 kPaA 237.87 psia Therefore Critical Flow Relief Area Required: A Required effective discharge area (in2) W Required flow through orifice (lb/hr) C Coefficient determined by k-value, see table 8 API 520 Kd Effective coefficient of discharge P1 Upstream releiving pressure Kb Capacity correction factor Kc Combination Correction Factor T Temperature (oR) Z Compressibility Factor M Molecular Weight W 11125.68 kg/hr 24521 lb/hr C 338 (From Table 8 API 520 Page # 50 See the Value Against k(Cp/Cv) ) K d 0.62 Use 0.62 P 1 1317.87 K b 1 K c 0.9 T 130 o F 54.44444 o C 590 o R (Comp. Factor) Z 0.82 Molecular wt. 22.21 Area ( A ) 0.460441 in 2 Designation Effective Orifice Area (in 2 ) (Decide The Orifice From API-526 Table1 Page # 08) Orifice G Effective Orifice Area 0.503 (From API-526 Table 1 Page #08) Therefore Valve selected - 1-1 /2G3 (Select The End Connection from the API526 from its Orifice table) Actual Relieving Rate 12154 kg/hr 26787.5 lb/hr M TZ K K P CK W A c b d 1 = 1 1 1 2
Prediction of HETP For Randomly Packed Towers Operation:integration of Aqueous and Non-Aqueous Mass Transfercharacteristics Into One Consistent Correlation
