Scribd
Upload
22 views1 page

Exercise3 6

The document provides fill-in-the-blank questions about manufacturing processes: granulation produces coarse powder with high oxide; sintering normally increases density and causes shrinkage; atomizing forces molten metal through an orifice into high velocity air or gas.

Uploaded by

tejap314
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Exercise3 6

The document provides fill-in-the-blank questions about manufacturing processes: granulation produces coarse powder with high oxide; sintering normally increases density and causes shrinkage; atomizing forces molten metal through an orifice into high velocity air or gas.

Uploaded by

tejap314
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Exercise

Fill in the blanks: 1. ______process produces a relatively coarse powder with a high percentage of oxide. 2. During sintering, ordinarily, the density of compact is ______ and ______ results. 3. In _______ process the molten metal is forced through an orifice into a stream of high velocity air, steam or inert gas. Ans. 1. Granulation, 2. Increased, shrinkage 3. Atomising

You might also like