Scribd
Upload
52 views3 pages

Programador para PIC Serial

This document provides a circuit diagram and parts list for a simple PIC programmer that can program PIC16F84, PIC16F84A, 16C84, and 16F628 microcontrollers. The circuit uses a BC547 transistor as a switch controlled by a PC's RS-232 port to program the PIC microcontrollers. The programmer is connected to the computer's COM port and the PIC is programmed using MPLAB and IC-PROG or similar software by loading a .HEX file.

Uploaded by

Anonymous LkH6F2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
52 views3 pages

Programador para PIC Serial

This document provides a circuit diagram and parts list for a simple PIC programmer that can program PIC16F84, PIC16F84A, 16C84, and 16F628 microcontrollers. The circuit uses a BC547 transistor as a switch controlled by a PC's RS-232 port to program the PIC microcontrollers. The programmer is connected to the computer's COM port and the PIC is programmed using MPLAB and IC-PROG or similar software by loading a .HEX file.

Uploaded by

Anonymous LkH6F2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PIC Programmer Circuit diagram

Following uJDM PIC programmer circuit is a circuit which suitable to do simple pic16f84, pic16f84A, 16c84, 16f628 group programmer.

PARTS LIST R1 R2 R3 C1 10K 3.3K 15K 100F 16V

D1 Z1 Q1

LED 5.1V Zener BC547 PIC16F84,PIC16F84A, 16C84,

PIC Rs232 IC Base

16F628 RS232 Femail Connector

18 pin ic base for PIC

BC547 Transistor Pin Configuration


Using IC base for PIC Connect the PIC programmer to 1st or 2nd COM PORT of computer by using RS232 wire. USE MPLAB AND IC-PROG (or any ic programming software) to program PIC with this PIC Programmer

PIC16F84A Micro Controller

PIC PROGRAMMER

PIC 16F84A Programmer

IC Prog settings for PIC programmer and programming PIC using .HEX file

You might also like