Scribd
Upload
20 views

Chromium Plating Step For Covering The Stamping Edges: The Preliminary Degreasing and The Subsequent Brushing

The document describes a 5-step process for chromium plating sheet metal that has been stamped with openings. First, the sheet material is chromium plated before stamping. Second, openings like hole patterns are stamped into the sheet using a multiple tool. Third, stamping burrs are deburred, skipping degreasing and brushing due to the prior chromium plating. Fourth, the sheet undergoes another chromium plating to coat the stamped edges and surfaces. Fifth, final steps of protecting and packaging the product are repeated from the previous example.

Uploaded by

Laxmi Rao
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
20 views

Chromium Plating Step For Covering The Stamping Edges: The Preliminary Degreasing and The Subsequent Brushing

The document describes a 5-step process for chromium plating sheet metal that has been stamped with openings. First, the sheet material is chromium plated before stamping. Second, openings like hole patterns are stamped into the sheet using a multiple tool. Third, stamping burrs are deburred, skipping degreasing and brushing due to the prior chromium plating. Fourth, the sheet undergoes another chromium plating to coat the stamped edges and surfaces. Fifth, final steps of protecting and packaging the product are repeated from the previous example.

Uploaded by

Laxmi Rao
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EXAMPLE 2

Step 1: sheet material, preferably in the form of coils, is already chromium plated prior to any stamping oper ation. Step 2: the openings, for example, in the form of hole patterns are stamped into the sheet metal, preferably
with a multiple tool.

Step 3: the deburxing of the stamping burrs takes place in accordance with Step 3 of Example 1, whereby

the preliminary degreasing and the subsequent brushing


are obviated due to the prior chromium plating. Step 4: the sheet material is subjected to a subsequent

chromium plating step for covering the stamping edges


and surfaces. Step 5: the Steps 6 and 7 of Example 1 are repeated.

You might also like