Scribd Logo
Upload

Welcome to Scribd!

  • 352 views

    Drill Collar According To DS1

    Uploaded by

    Hayder Habib
    (1) This inspection report details the inspection of 4 drill collar joints according to specification DS-1. (2) The inspection found the outside diameter, threads, joints, bore back, counter bore, bevels, and other dimensions to be acceptable on all 4 joints. (3) Abbreviations used in the report are defined.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Drill Collar According To DS1

    Uploaded by

    Hayder Habib
    352 views1 page
    (1) This inspection report details the inspection of 4 drill collar joints according to specification DS-1. (2) The inspection found the outside diameter, threads, joints, bore back, counter bore, bevels, and other dimensions to be acceptable on all 4 joints. (3) Abbreviations used in the report are defined.

    Original Title

    Drill Collar According to DS1

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    (1) This inspection report details the inspection of 4 drill collar joints according to specification DS-1. (2) The inspection found the outside diameter, threads, joints, bore back, counter bore, bevels, and other dimensions to be acceptable on all 4 joints. (3) Abbreviations used in the report are defined.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    352 views1 page

    Drill Collar According To DS1

    Uploaded by

    Hayder Habib
    (1) This inspection report details the inspection of 4 drill collar joints according to specification DS-1. (2) The inspection found the outside diameter, threads, joints, bore back, counter bore, bevels, and other dimensions to be acceptable on all 4 joints. (3) Abbreviations used in the report are defined.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SEENOPEX INSPECTION SERVICES

    Inspection Report for Drill Collar According To DS-1


    Customer: Well Name & Location: Connection & OD Size: IDC IDC WORK SHOP NC50 & 6 3/4" Date Of Service : Seenopex Work Order Dimensional (3) 16/08/203 IDC-167 III Min bevel width Min counter bore depth Category
    1

    SPX-IMS-F-063
    /32

    18/32 3-5

    Condition Serial No.

    Pin

    Box
    Pin Tong

    Body
    Overall (ft) Box Tong

    BB cly

    Bevel

    C 1010 C 751 C 1641 C 1272

    ACC ACC ACC ACC

    ACC ACC ACC ACC

    ACC ACC ACC ACC

    6 5/8" 6 5/8" 6 5/8" 6 3/4"

    3" 3" 3" 3"

    4 23/32" 4 23/32" 4 23/32" 4 23/32"

    1" 1" 1" 1"

    6 3/8" 6 3/8" 6 3/8" 6 3/8"

    6 5/8" 6 5/8" 6 5/8" 6 3/4"

    5 10/32" 5 10/32" 5 10/32" 5 10/32"

    4 5/8" 4 5/8" 4 5/8" 4 5/8"

    8" 8" 8" 8"

    6 3/8" 6 3/8" 6 3/8" 6 3/8"

    Bevel

    SRG

    SRG

    Body

    CB

    BB

    Box

    OD

    OD

    Pin

    ID

    20 3/4" 18" 15" 19"

    28 1/8" 20 3/8" 32 1/4" 31 1/2"

    29' 1" 28' 2" 28' 10" 29' 2"

    Result: Remarks
    OD EGR GT G (good)

    04 Joints Were Found Acceptable (Ready To Use).

    Abbreviations:
    Outside Diameter Diameter Elevator Groove Recess Galled Thread 100-90 % Coating Colors Code: ID SGR TP F (fair) Red Inside Diameter Length Slip Groove Recess Thread Pitting 75-90 % Coating Short T. Joint SRG CR SP P (poor) Yellow Stress Relief Groove Width Crack Seal Pitting Less than 75 % Coating 2 Class
    nd

    CB B TD E Orange

    Counter Bore Depth Bent Thread Damage Nil 3 Class


    rd

    BB NP. PC SD

    Bore Back Not Present Premium Class Seal Damage

    FB NA. RF M WT

    Float Bore Not Applicable Reface Mashed Wall Thickness Need Hard Banding

    Blue

    Re-cut Conn.

    Green

    Inspector:

    OSAMA ALI

    Supervisor:

    Mostafa Hassan

    You might also like