Scribd
Upload
53 views1 page

Initial Address (Iam) : + Nature of Connection Indicators +

This document contains the initial address message (IAM) and subsequent release messages for a call attempt between two subscribers. The IAM provides details about the call such as the called party number, nature of address, and call indicators. The call is then released with a cause code of "unallocated number" indicating the called number was invalid.

Uploaded by

Jane Goodwin
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

Initial Address (Iam) : + Nature of Connection Indicators +

This document contains the initial address message (IAM) and subsequent release messages for a call attempt between two subscribers. The IAM provides details about the call such as the called party number, nature of address, and call indicators. The call is then released with a cause code of "unallocated number" indicating the called number was invalid.

Uploaded by

Jane Goodwin
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UPDN3-450

|CIC: 2

[12:27:14:4] IAM------>
*** INITIAL ADDRESS (IAM) ***
### TMR: 0 Cat. A: OPC: 14440 DPC: 14594 "Speech" 10 "Ordinary calling subscriber" SLS: 2 ###

+ NATURE OF CONNECTION INDICATORS + Satellite indic.: 1 "One satellite circuit in the connection" Continuity check indic.: 0 "Continuity check not required" Echo control device indic.: 1 "Outgoing half echo control device included" + FORWARD CALL INDICATORS + National/international call indic.: 0 "Call to be treated as a national call" End-to-End method indic.: 0 "No end to end method available (only link-by-link method available)" Interworking indic.: 0 "No interworking encountered (No.7 signalling used all the way)" End to End information indic.: 0 "No end to end information available" ISDN User Part indic.: 1 "ISDN user part used all the way" ISDN User Part preference indic.: 1 "ISDN user part not required all the way" ISDN access indic.: 1 "Originating access ISDN" SCCP method indic.: 0 "No indication" VPN call indic.: 0 "Non VPN call" + CALLED PARTY NUMBER + B Number: 54221117503563F Nature of address indic.(BNT): Numbering plan indic.(NAPI): Internal Network Number indic.:

4 "International number" 1 "ISDN (Telephony) numbering plan(Rec E.164)" 1 "Routing to internal network number not allowed"

+ USER SERVICE INFORMATION + Information transfer capability: 0 "Speech" Transfer mode: 0 "Circuit mode" Information transfer rate: 16 "64 kbit/s" + PARAMETER COMPATIBILITY INFORMATION + Transit at intermediate exchange indic.: 1 "End node interpretation" Release call indic.: 0 "Do not release call" Discard message indic.: 0 "Do not discard message (pass on)" Discard parameter indic.: 1 "Discard parameter" Send notification indic.: 0 "Do not send notification" Pass on not possible indic.: 1 "Discard message"

[12:27:14:5] <------REL
*** RELEASE (REL) ***
### OPC: 14594 DPC: 14440 SLS: 2 ### + CAUSE INDICATORS + Location: 4 "Public network serving the remote user (RLN)" Cause: 1 "Unallocated (unassigned)number"

[12:27:14:5] RLC------>
*** RELEASE COMPLETE (RLC) ***
### OPC: 14440 DPC: 14594 SLS: 2 ###

You might also like