Scribd
Upload
1K views1 page

Formula To Calculate Gear Pump Displacement

The document provides a formula to calculate the displacement of a gear pump in cubic centimeters per revolution based on the gear width, tip diameter, and distance between gear centers when meshed. It includes photos of an example gear set with dimensions and uses the formula to calculate the displacement as 19.52cc/rev, noting the actual displacement of the example gear set is 19cc, showing the formula provides a reasonably accurate estimate. A disclaimer is given that the formula is a general guide and cannot be relied on to be perfectly accurate.

Uploaded by

Stroia Constantin Marius
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Formula To Calculate Gear Pump Displacement

The document provides a formula to calculate the displacement of a gear pump in cubic centimeters per revolution based on the gear width, tip diameter, and distance between gear centers when meshed. It includes photos of an example gear set with dimensions and uses the formula to calculate the displacement as 19.52cc/rev, noting the actual displacement of the example gear set is 19cc, showing the formula provides a reasonably accurate estimate. A disclaimer is given that the formula is a general guide and cannot be relied on to be perfectly accurate.

Uploaded by

Stroia Constantin Marius
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Formula to calculate gear pump displacement.

Q=
Q b da a = = = =

x b x (da2 a2)
Displacement cm3/rev. Gear Width cm. (see photo 1) Gear tip diameter cm. (see photo 2) Gear Centres (when meshed) cm. (see photo 3)

P Photo 1 shows gear width 1.614cm Photo 2 shows tip diameter 5.039cm Photo 3 - shows gear centres 4.206cm

Example gear set shown

x 1.614

x (5.0392 4.2062) = 19.52cc/rev.

Please note this is a general guide and cannot be relied on to be 100 % accurate (mind you the gear set in the photo is actually 19cc so it works pretty well). UHE do not accept any liability for misapplication of this information

You might also like