Scribd
Upload
31 views

Cds Photoconductive Photocells: Pdv-P8001

This document summarizes the specifications and characteristics of the CdS Photoconductive Photocell PDV-P8001. It is packaged in a two-leaded plastic-coated ceramic header measuring 4.29mm x 3.4mm x 2mm. It has a visible light response and is designed to sense light from 400-700nm. Its applications include camera exposure, shutter controls, and night light controls. It has maximum ratings for applied voltage, continuous power dissipation, and operating/storage temperature. Its electro-optical characteristics include dark resistance, illuminated resistance, sensitivity, spectral response range, rise time, and fall time.

Uploaded by

Byron Xavier Lima Cedillo
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Cds Photoconductive Photocells: Pdv-P8001

This document summarizes the specifications and characteristics of the CdS Photoconductive Photocell PDV-P8001. It is packaged in a two-leaded plastic-coated ceramic header measuring 4.29mm x 3.4mm x 2mm. It has a visible light response and is designed to sense light from 400-700nm. Its applications include camera exposure, shutter controls, and night light controls. It has maximum ratings for applied voltage, continuous power dissipation, and operating/storage temperature. Its electro-optical characteristics include dark resistance, illuminated resistance, sensitivity, spectral response range, rise time, and fall time.

Uploaded by

Byron Xavier Lima Cedillo
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CdS Photoconductive Photocells PDV-P8001

PACKAGE DIMENSIONS INCH [mm] PACKAGE DIMENSIONS INCH [mm]


.010 [0.25] .169 [4.29] +.015 [0.38] -.010 [0.25] .079 [2.00] EPOXY ON LEADS 3 mm MAX 2X .016 [0.40]

.134 [3.40]

.010 [0.25] .200 [5.08]

PLASTIC COATED 2X 1.023 [26.0]

CERAMIC PACKAGE

FEATURES
Visible light response Sintered construction Low cost

DESCRIPTION
The PDV-P8001 are (CdS), Photoconductive photocells designed to sense light from 400 to 700 nm. These light dependent resistors are available in a wide range of resistance values. Theyre packaged in a two leaded plastic-coated ceramic header.

APPLICATIONS
Camera exposure Shutter controls Night light Controls

ABSOLUTE MAXIMUM RATING (TA)= 23C UNLESS OTHERWISE NOTED


SYMBOL Vpk Pd po/t TO TS PARAMETER Applied Voltage Continuous Power Dissipation Operating and Storage Temperature Soldering Temperature* -30 MIN MAX 150 100 +75 +260 UNITS V mW/C C C

* 0.200 inch from base for 3 seconds with heat sink.

ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23C UNLESS OTHERWISE NOTED


SYMBOL RD RI S lrange lpeak tr Tf CHARACTERISTIC Dark Resistance Illuminated Resistance TEST CONDITIONS MIN 0.2 3 0.6 400 520 55 20 700 TYP MAX 11 After 10 sec. @ 10 Lux @ 2856 K 10 Lux @ 2856 K LOG(R100)-LOG(R10)** Sensitivity LOG(E100)-LOG(E10)*** Spectral Application Range Flooded Spectral Application Range Flooded Rise Time 10 Lux @ 2856 K Fall Time After 10 Lux @ 2856 K UNITS MW KW W/Lux nm nm ms ms

**R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 K respectively . ***E100, E10: luminances at 100 Lux and 10 Lux 2856 K respectively.
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. REV 3/30/06

You might also like