Ceramic Disc Capacitors NCD Series Class I

TEMPERATURE COMPENSATING AND

TEMPERATURE STABLE TYPES (CLASS I)
FEATURES
• PROVIDES AN ACCURATE, PREDICTABLE LINEAR CAPACITANCE
..CHANGE WITH VARIATIONS IN OPERATING TEMPERATURE
• NPO TYPES PROVIDE DRIFT FREE PERFORMANCE
• TIGHT TOLERANCES AVAILABLE
• AVAILABLE WITH FORMED LEADS AND ON TAPE *See Part Number System for Details

SPECIFICATIONS
Temperature
NPO N150 N750 SL N1500 N3300
Characteristics
Operating
-30°C ~ +85°C
Temperature Range
Capacitance Range 0.5 ~ 470pF 3.0 ~ 27pF 22 ~ 470pF 0.5 ~ 1000pF 22 ~ 2200pF 47 ~ 1000pF
Standard Tolerance ±5% (J)
Capacitance Change Over
±1% -1 ~ +2% -5% ~ +7.5% -5% ~ +9% -10% ~ +20% -13% ~ +12%
Temperature Range
1000 (C>30pF) 500 (C>30pF)
Q Factor (Min. 1MHz)
400+20C (<30pF) 200+10C (<30pF)
Insulation Resistance Minimum 10,000 Megohms
Temperature Coefficient 0±60ppm N150±60ppm N750±120ppm N330±500ppm N1500±250ppm N3300±500ppm
Working Voltage Range 50Vdc ~ 1KVdc
Dielectric Withstanding
2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum
Voltage (Test Voltage)
Load Life Cap. Change ±3% ±5% ±8% ±15% ±30% ±50% ±50%
Test @ 85°C Q Factor (min.) Shall Confom To Initial Measurements Above
1,000 Hours I.R. (min.) 10,000 Megohms
Test Conditions <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max.

NCD 101 J 500 NPO J .1LS TR F

RoHS compliant
Optional Packaging
+10
F TR = Taped and Reel
A−NPO TB = Tape and Box (Ammo)
D
B−N-150
C−N-330
Optional Lead Space (LS) and/or
+5
D−N-750 Lead Length (LL) in inches
C E−N-1500 Optional Lead Style
B F−SL
A C = Cut Lead
O A D = Inside Kink (Short Leads)
B
PERCENT CHANGE

C E = Outward Kink (Short Leads)

J = Inside Kink (Long Leads)
FROM 25OC

D K = Outward Kink (Long Leads)

-5
Temperature Coefficient
F Working Voltage DC
-10 E
TEMPERATURE
Tolerance Code
C = ± 0.25pF K = ± 10%
-55 -35 -15 +5 +25 +45 +65 +85 D = ± 0.5pF M = ± 20%
J = ± 5% Z = + 80% / - 20%
Capacitance code, expressed in pfd,
First two digits are significant, third digit is no. of
zeros. “R” indicates decimal for under 10pfd.
Series
®

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

57
 Ceramic Disc Capacitors NCD Series Class I
Standard Low Voltage
Lead Spacing (mm) - S 500Vdc & Up 100Vdc & Below
Body Standard Standard Optional Bulk Optional T&R
Diameter Bulk T&R mm (inches) mm (inches)
5 ~ 11 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 (0.2LS) 2.5 ± 0.8 (0.1LS)
7.5 ± 0.8 (0.295LS) 7.5 ± 0.8 (0.295LS)
>12 6.35 ± 0.8 5.0 ± 0.8
10.0 ± 0.8 (0.395LS) 10.0 ± 0.8 (0.395LS)
3 max. 2 max.

23 min. 23 min.

LEAD DIAMETER BODY THICKNESS

0.6MM IS STANDARD 2 ~ 4MM DEPENDENT ON CV
S S
J Style K Style
D Style E Style

5 max. 5 max.
1.5+0.2 1.5+0.2 5 max. 5 max.
23 min. 23 min. 1.5+0.2 1.5+0.2
4.7 + 1 4.7 + 1
S S
S S
(BULK AND TAPED STYLES) (BULK ONLY)

STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE

NPO N150 N750 SL N1500 N3300
Cap. Working Voltage (Vdc)
(pF) 50 50 50 50 50 50
500 1K 500 1K 500 1K 500 1K 500 1K 500 1K
100 100 100 100 100 100
0.5 ~ 18 6 6 6 6 6 7 - - - 6 6 6 - - - - - -
20 6 6 6 6 7 8 6 6 6 6 6 6 - - - - - -
22 6 6 6 6 7 8 6 6 6 6 6 6 6 6 6 - - -
27 6 6 6 7 8 9 6 6 6 6 6 6 6 6 6 - - -
33 6 6 7 - - - 6 6 7 6 6 6 6 6 6 - - -
39 6 7 7 - - - 6 6 7 6 6 6 6 6 6 - - -
47 6 7 8 - - - 6 7 8 6 6 6 6 6 6 - 6 -
56 7 7 8 - - - 7 7 8 6 6 6 6 6 6 - 6 6
68 7 7 9 - - - 7 7 9 6 6 6 6 6 6 - 6 6
75 7 7 9 - - - 7 7 9 6 6 7 6 6 7 - 6 6
82 7 7 9 - - - 7 7 9 6 6 7 6 6 7 6 6 6
100 8 8 10 - - - 8 8 10 6 6 7 6 7 7 6 6 6
120 8 8 10 - - - 8 8 10 6 6 7 6 7 7 6 6 6
150 9 9 12 - - - 9 9 12 6 7 8 6 8 8 6 6 7
180 9 9 14 - - - 9 9 14 6 7 8 6 8 8 6 7 7
220 10 10 16 - - - 10 10 16 7 8 9 7 9 9 7 7 7
270 12 12 16 - - - 12 12 16 8 9 10 8 9 10 7 7 7
330 14 14 18 - - - 14 14 18 8 10 12 8 10 12 7 7 8
470 16 16 20 - - - 16 16 20 9 12 14 9 12 14 7 8 9
560 - - - - - - - - - 10 12 14 10 14 14 8 9 11
680 - - - - - - - - - 10 14 16 10 14 16 8 10 11
750 - - - - - - - - - 12 16 16 12 16 16 8 10 11
820 - - - - - - - - - 12 16 16 12 16 16 8 10 11
1000 - - - - - - - - - 14 16 18 14 16 18 10 12 13

NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

58
Ceramic Disc Capacitors Taping Specifications
DIMENSIONS (mm) Δh
P
P2
T

P1 H1
S

H
L

d D
P0

Diameters up to
22mm max. are P2 P D
available on tape.
T = 2 ~ 7mm DEPENDENT
ON T.C. AND CV
S H1
P1
H
H0
L
t
W

d Dφ
P0

Symbol D max. d P* P0 P1 P2 S H H0 H1 Dφ W L t Δh
5.1 2.5
12.0 12.7 3.85 5.0 Max. Max.
Value 0.6 12.7 6.35 20.0 16.0 4.0 18.0 0.7 0
22.0 25.4 3.18 6.35 32.25 11.00
2.6 7.5
+0.06 ±0.8 +1.5
Tolerance --- ±1.0 ±0.2 ±0.7 ±1.0 ±0.5 --- ±0.2 ±0.5 --- ±0.2 ±2.0
-0.05 -0.2 -1.0
* -Dimension “P” is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm.
AMMO PACK
REEL
H ≤ 372 (14.64")
L ≤ 377 (14.84")
D<
H

W ≤ 55 (2.16") = 354 (13.93")

>
B D
B = 21 (.83") but
< 30 (1.18")
=
L W< = 55 (2.16")
W
Acceptable to
standard radial type cartridge. Acceptable to standard radial type cartridge with a few
W
extra accessories.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

65