Scribd
Upload
78 views2 pages

GSM Based Wireless Appliances Monitoring and Control

This document presents a GSM-based home appliance control system that uses an embedded system with inputs and outputs to control appliances locally and allows a homeowner to monitor and control appliances remotely via SMS messages by sending commands to and receiving status from the system through a GSM modem. The system was designed, implemented, and tested using an 89S52 microcontroller, MAX232 interface, ULN2003 driver, relays, and loads with software developed in C.

Uploaded by

praveen_kodgirwar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
78 views2 pages

GSM Based Wireless Appliances Monitoring and Control

This document presents a GSM-based home appliance control system that uses an embedded system with inputs and outputs to control appliances locally and allows a homeowner to monitor and control appliances remotely via SMS messages by sending commands to and receiving status from the system through a GSM modem. The system was designed, implemented, and tested using an 89S52 microcontroller, MAX232 interface, ULN2003 driver, relays, and loads with software developed in C.

Uploaded by

praveen_kodgirwar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

GSM-based Wireless Home Appliances Control system

This paper presents the emerging applications of the GSM technology. Using the public GSM networks, a home automation system has been proposed, designed, implemented and tested. The design of a stand-alone embedded system that can control home appliances locally using built-in input and output peripherals is presented. Remotely, the system allows the homeowner monitoring and controlling the house appliances via the mobile phone set by sending commands in the form of SMS messages and receiving the appliances status. The GSM modem provides the communication media between the homeowner and the system by means of SMS messages. The system software driver is also developed using an interactive C programming language platform.

SOFTWARE:

Embedded C Code ucFlash Keil Compiler

HARDWARE:

89S52 Microcontroller MAX232 Interface ULN2003 Driver Relays AC LOADS

Block Diagram:

16*2 LCD DISPLAY

89S52 MCU GSM MODEM MAX232 INTERFACE

ULN2003 RELAYS CURRENT DRIVER AC LOADS

You might also like