Scribd
Upload
101 views1 page

4320

BIMCO ENGINEERING ENTERPRISE ENTER manufactures bright steel round bar that is 32mm in diameter, 13 metric tons in length cut into 3 meter sections, with a tolerance of +25mm/-0mm and +4mm/-0mm per meter. The steel has a chemical composition of carbon 0.17-0.22%, sulfur 0.025% max, and other elements, and is manufactured through electric arc furnace and other processes to achieve specific mechanical properties. The steel bars undergo various inspections and tests to check for surface and internal defects and meet standards.

Uploaded by

Tarun Gupta
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views1 page

4320

BIMCO ENGINEERING ENTERPRISE ENTER manufactures bright steel round bar that is 32mm in diameter, 13 metric tons in length cut into 3 meter sections, with a tolerance of +25mm/-0mm and +4mm/-0mm per meter. The steel has a chemical composition of carbon 0.17-0.22%, sulfur 0.025% max, and other elements, and is manufactured through electric arc furnace and other processes to achieve specific mechanical properties. The steel bars undergo various inspections and tests to check for surface and internal defects and meet standards.

Uploaded by

Tarun Gupta
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BIMCO ENGINEERING ENTERPRISE ENTER

(MANUFACTURERS AND ENGINEERS)

AN ISO 2001-9008 CERTIFIED UNIT OFFICE: 40, RAMAN ENCLAVE EXTN. RISHI NAGAR, LUDHIANA - 141 001
WORKS: Jaspal Banger Road, Near Tyre Factory, Dhandari, LUDHIANA - 141 010
Phone: +91-161-2300479, 9417234191 Mobile: +91-9216134193 Fax: +91-161-2300479 E-mail: mail: [email protected]

BRIGHT STEEL ROUND BAR 32 MM DIA - 13 M.T. LENGTH - 3MTRS. + 25MM/ -0MM 0MM STRAIGHT TOLERANCE PLUS 4MM/-0MM 4MM/ IN ONE MTR GRADE AISI E4320 4320 WITH RESTRICTED SULPHUR AND PHOSPHORUS The steel shall be made ade in electric arc furnance, fully killed and VAD treated. The steel shall be hot rolled, normalised, machine straightened, bright finish with sawn cut ends. The steel shall be 100% magnetic particle inspected. The bright brigh steel shall be supplied under adequate coating of anti-rust anti compound. CHEMICAL COMPOSITION CARBON 0.17 0.22 SULPHUR 0.025 MAX SILICON 0.20 0.35 NICKEL 1.65 2.0

MANGANESE PHOSPHORUS CHROMIUM MOLYBDENUM

0.45 0.65 0.025 MAX 0.40 0.60 0.25 0.30

SURFACE DEFECTS: Total depth of surface defects (like seams, laps, scar marks, folds, total decarburization or any other harmful defect) shall be as per IS:9550 latest version, against the corresponding size. MACRO EXAMINATION Macro Examination of deep acid etched sections of f bars (in as received condition) shall show no evidence of abnormalities like shrinkage-cavity, shrinkage blow-hole, porosity, sity, piping, pin-holes, pin hairline-cracks, seams or any other harmful defects. defects MICRO EXAMINATION Microstructure shall reveal uniform equiaxed grains of Ferrite and Pearlite. . The grain size shall be of ASTM No 5 or finer. The microstructure shall be free from any banding, lamination, lamination, harmful segregation or any other her detrimental defect. HARDNESS 140 200 BHN CLEANLINESS TYPE A B C D

Thin Series 1.5 1.5 1.5 1.5

Thick Series 1.0 1.0 1.0 1.0

You might also like