PRACTICA 5 PROTOCOLO IGRP

ROUTER TIJUANA Press Enter to Start Router> Router>enable Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname tijuana tijuana(config)#int e0 tijuana(config-if)#ip address 192.168.70.1 255.255.255.0 tijuana(config-if)#no shut %LINK-3-UPDOWN: Interface Ethernet0, changed state to up tijuana(config-if)#exit tijuana(config)#int s0 tijuana(config-if)#ip address 172.10.1.1 255.255.0.0 tijuana(config-if)#clock rate 64000 tijuana(config-if)#bandwidth 64 tijuana(config-if)#no shut %LINK-3-UPDOWN: Interface Serial0, changed state to up

tijuana(config-if)#exit %LINK-3-UPDOWN: Interface Serial0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down tijuana(config)#int s1 tijuana(config-if)#ip address 175.10.1.2 255.255.0.0 tijuana(config-if)#clock rate 64000 tijuana(config-if)#bandwith 64 % Invalid input detected at '^' marker. tijuana(config-if)#bandwidth 64 tijuana(config-if)#no shut %LINK-3-UPDOWN: Interface Serial1, changed state to up tijuana(config-if)#exit %LINK-3-UPDOWN: Interface Serial1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down tijuana(config)#router igrp 100 tijuana(config-router)#network 192.168.70.1 tijuana(config-router)#network 172.10.1.1 tijuana(config-router)#network 175.10.1.2 tijuana(config-router)#variance 2 % Invalid input detected at '^' marker. tijuana(config-router)#variance2 % Invalid input detected at '^' marker. tijuana(config-router)#variance % Invalid input detected at '^' marker. tijuana(config-router)#variance 2 % Invalid input detected at '^' marker. tijuana(config-router)#exit tijuana(config)#exit %LINK-3-UPDOWN: Interface Serial0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up %LINK-3-UPDOWN: Interface Serial1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up tijuana#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route

Gateway of last resort is not set C 192.168.70.0/24 is directly connected, Ethernet0 C 172.10.0.0/16 is directly connected, Serial0 I 193.168.70.0/24 [100/651] via 172.10.1.2, 00:06:32, Serial0 I 173.10.0.0/16 [100/651] via 172.10.1.2, 00:04:31, Serial0 C 175.10.0.0/16 is directly connected, Serial1 I 195.168.70.0/24 [100/651] via 175.10.1.1, 00:04:12, Serial1 I 174.10.0.0/16 [100/651] via 175.10.1.1, 00:02:20, Serial1 I 194.168.70.0/24 [100/1040] via 175.10.1.1, 00:02:29, Serial1 tijuana#ping 194.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 194.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms tijuana#ping 195.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 195.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms tijuana#ping 193.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 193.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms tijuana#show ip protocols Routing Protocol is "igrp 100" Sending updates every 90 seconds, next due in 48 seconds Invalid after 270 seconds, hold down 280, flushed after 630 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 IGRP maximum hopcount 100 IGRP maximum metric variance 1 Redistributing: igrp 100 Routing for Networks: 192.168.70.0

172.10.0.0 175.10.0.0 Routing Information Sources: 172.10.1.2 100 00:00:03 175.10.1.1 100 00:00:06 Distance: (default is 100)

ROUTER OAXACA

Press Enter to Start

Router> Router>enable Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname oaxaca oaxaca(config)#int e0 oaxaca(config-if)#ip address 193.168.70.1 255.255.255.0 oaxaca(config-if)#no shut %LINK-3-UPDOWN: Interface Ethernet0, changed state to up oaxaca(config-if)#exit oaxaca(config)#int s0 oaxaca(config-if)#ip address 172.10.1.2 255.255.0.0 oaxaca(config-if)#clock rate 64000 oaxaca(config-if)#bandwidth 64 oaxaca(config-if)#no shut %LINK-3-UPDOWN: Interface Serial0, changed state to up oaxaca(config-if)#exit oaxaca(config)#int s1 oaxaca(config-if)#ip address 173.10.1.1 255.255.0.0 oaxaca(config-if)#clock rate 64000 oaxaca(config-if)#bandwidth 64 oaxaca(config-if)#no shut %LINK-3-UPDOWN: Interface Serial1, changed state to up

oaxaca(config-if)#exit %LINK-3-UPDOWN: Interface Serial1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down oaxaca(config)#router igrp 100 oaxaca(config-router)#network 193.168.70.1 oaxaca(config-router)#network 172.10.1.2 oaxaca(config-router)#network 173.10.1.1 oaxaca(config-router)#variance 2 % Invalid input detected at '^' marker. oaxaca(config-router)#exit oaxaca(config)#exit %LINK-3-UPDOWN: Interface Serial1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up oaxaca#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route Gateway of last resort is not set C 193.168.70.0/24 is directly connected, Ethernet0 C 172.10.0.0/16 is directly connected, Serial0 I 192.168.70.0/24 [100/651] via 172.10.1.1, 00:02:41, Serial0 C 173.10.0.0/16 is directly connected, Serial1 I 194.168.70.0/24 [100/651] via 173.10.1.2, 00:01:42, Serial1 I 174.10.0.0/16 [100/651] via 173.10.1.2, 00:04:41, Serial1 I 175.10.0.0/16 [100/651] via 172.10.1.1, 00:05:15, Serial0 I 195.168.70.0/24 [100/1040] via 173.10.1.2, 00:02:23, Serial1 oaxaca#ping 195.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 195.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms oaxaca#ping 194.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 194.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

oaxaca#ping 192.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms oaxaca#show ip protocols Routing Protocol is "igrp 100" Sending updates every 90 seconds, next due in 29 seconds Invalid after 270 seconds, hold down 280, flushed after 630 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 IGRP maximum hopcount 100 IGRP maximum metric variance 1 Redistributing: igrp 100 Routing for Networks: 193.168.70.0 172.10.0.0 173.10.0.0 Routing Information Sources: 172.10.1.1 100 00:00:00 173.10.1.2 100 00:00:00 Distance: (default is 100) oaxaca#

ROUTER VERACRUZ

Press Enter to Start

Router> Router>enable

Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname veracruz veracruz(config)#int e0 veracruz(config-if)#ip address 194.168.70.1 255.255.255.0 veracruz(config-if)#no shut %LINK-3-UPDOWN: Interface Ethernet0, changed state to up veracruz(config-if)#exit veracruz(config)#int s0 veracruz(config-if)#ip address 174.10.1.1 255.255.0.0 veracruz(config-if)#clock rate 64000 veracruz(config-if)#bandwidth 64 veracruz(config-if)#no shut %LINK-3-UPDOWN: Interface Serial0, changed state to up veracruz(config-if)#exit %LINK-3-UPDOWN: Interface Serial0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down veracruz(config)#int s1 veracruz(config-if)#ip address 173.10.1.2 255.255.0.0 veracruz(config-if)#clock rate 64000 veracruz(config-if)#bandwidth 64 veracruz(config-if)#no shut %LINK-3-UPDOWN: Interface Serial1, changed state to up veracruz(config-if)#exit veracruz(config)#exit veracruz#config t Enter configuration commands, one per line. End with CNTL/Z. veracruz(config)#router igrp 100 veracruz(config-router)#network 194.168.70.1 veracruz(config-router)#network 174.10.1.1 veracruz(config-router)#network 173.10.1.2 veracruz(config-router)#exit veracruz(config)#exit %LINK-3-UPDOWN: Interface Serial0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up veracruz#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route Gateway of last resort is not set

C 194.168.70.0/24 is directly connected, Ethernet0 C 173.10.0.0/16 is directly connected, Serial1 I 193.168.70.0/24 [100/651] via 173.10.1.1, 00:02:38, Serial1 I 172.10.0.0/16 [100/651] via 173.10.1.1, 00:08:20, Serial1 C 174.10.0.0/16 is directly connected, Serial0 I 195.168.70.0/24 [100/651] via 174.10.1.2, 00:03:30, Serial0 I 175.10.0.0/16 [100/651] via 174.10.1.2, 00:09:41, Serial0 I 192.168.70.0/24 [100/1040] via 174.10.1.2, 00:07:13, Serial0 veracruz#ping 192.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms veracruz#ping 193.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 193.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms veracruz#ping 195.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 195.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms veracruz#show ip protocols Routing Protocol is "igrp 100" Sending updates every 90 seconds, next due in 66 seconds Invalid after 270 seconds, hold down 280, flushed after 630 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 IGRP maximum hopcount 100 IGRP maximum metric variance 1 Redistributing: igrp 100 Routing for Networks: 194.168.70.0 174.10.0.0 173.10.0.0

Routing Information Sources: 173.10.1.1 100 00:00:03 174.10.1.2 100 00:00:03 Distance: (default is 100) veracruz#

ROUTER MONTERREY

Press Enter to Start

Router> Router>enable Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname monterrey monterrey(config)#int e0 monterrey(config-if)#ip address 195.168.70.1 255.255.255.0 monterrey(config-if)#no shut %LINK-3-UPDOWN: Interface Ethernet0, changed state to up monterrey(config-if)#exit monterrey(config)#int s0 monterrey(config-if)#ip address 174.10.1.2 255.255.0.0 monterrey(config-if)#clock rate 64000 monterrey(config-if)#bandwidth 64 monterrey(config-if)#no shut %LINK-3-UPDOWN: Interface Serial0, changed state to up monterrey(config-if)#exit monterrey(config)#int s1 monterrey(config-if)#ip address 175.10.1.1 255.255.0.0 monterrey(config-if)#clock rate 64000 monterrey(config-if)#bandwidth 64 monterrey(config-if)#no shut %LINK-3-UPDOWN: Interface Serial1, changed state to up monterrey(config-if)#exit

monterrey(config)#router igrp 100 monterrey(config-router)#network 195.168.70.1 monterrey(config-router)#network 174.10.1.2 monterrey(config-router)#netwrok 175.10.1.1 % Invalid input detected at '^' marker. monterrey(config-router)#network 175.10.1.1 monterrey(config-router)#exit monterrey(config)#exit monterrey#show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route Gateway of last resort is not set C 195.168.70.0/24 is directly connected, Ethernet0 C 174.10.0.0/16 is directly connected, Serial0 C 175.10.0.0/16 is directly connected, Serial1 I 194.168.70.0/24 [100/651] via 174.10.1.1, 00:02:22, Serial0 I 173.10.0.0/16 [100/651] via 174.10.1.1, 00:04:25, Serial0 I 192.168.70.0/24 [100/651] via 175.10.1.2, 00:03:43, Serial1 I 172.10.0.0/16 [100/651] via 175.10.1.2, 00:05:20, Serial1 I 193.168.70.0/24 [100/1081] via 175.10.1.2, 00:03:36, Serial1 monterrey#ping 192.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms monterrey#ping 193.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 193.168.70.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms monterrey#ping 194.168.70.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 194.168.70.1, timeout is 2 seconds: !!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms monterrey#show ip protocols Routing Protocol is "igrp 100" Sending updates every 90 seconds, next due in 11 seconds Invalid after 270 seconds, hold down 280, flushed after 630 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 IGRP maximum hopcount 100 IGRP maximum metric variance 1 Redistributing: igrp 100 Routing for Networks: 195.168.70.0 174.10.0.0 175.10.0.0 Routing Information Sources: 174.10.1.1 100 00:00:06 175.10.1.2 100 00:00:06 Distance: (default is 100)