A D VA N C E D

I M A G I N G

M A D E

A F F O R D A B L E

NeuViz 16

NeuViz 16

Quality You Can Afford

The pursuit of ever more accurate
imaging procedures is complicated by
the relentless pressure on healthcare
institutions and physicians to produce
more affordable diagnoses. In order
to meet these conflicting demands,
Neusoft has developed the NeuViz 16,
16-slice computed tomography scanner,
to achieve cost-effective, cutting-edge
patient care.

NeuViz 16 offers multi-detector capability

to generate clearer 3-D images of complex
anatomical structures in an exceptionally
compact design.

Key Features
Friendly tool bar and
graphical user interface
Effortless patient data input
Intuitive registration and
clinical procedure selection
Easy-to-use workflow
for efficient operation

Efficiency
16-slice technology reduces exam time for more rapid diagnosis
and maximum patient throughput
Reliable system performance
Low environmental costs due to minimal space requirements
and optimal energy efficiency
Compact design simplifies site planning

Clinical Benefits
Diagnostic insight is found at the intersection of modern imaging and advanced
information technology.
The NeuViz 16 operators console establishes an efficient environment for acquisition,
reconstruction and post-processing using Neusofts embedded computer-aided
diagnostic (CAD) software.
Neusoft IT solutions provides visually enhanced 2D and 3D images and stabilize
system performance to improve the diagnostic capabilities of CT.
UroCARE | OsteoCARE* | NeuColonCARE*

Integrated Detector combines the widest detector

coverage in its class with our with DAS system to
dramatically improve signal-to-noise ratio for high
resolution scanning, shorter breath-hold times,
lower patient dose and improved patient comfort.
Patented Dynamic Focal Spot technology enables
exceptional spatial resolution during axial and spiral
scanning by alternately sampling two fan beams and
doubling the reconstruction data samples to produce
a more detailed image.
Dose Reduction functions reduce radiation exposure.
Features including Automatic Current Selection,
DoseRight Dose Modulation, and dedicated pediatric
protocols deliver optimal dose efficiency without
compromising image quality. Modulation optimization
tools enhance user experience, improves image quality
and reduces patient dose by up to 50 percent.

*Not available in all countries

Advanced Technology

Exceptionally Compact Design

With a footprint less than 190 sq. ft. (17.7 m), the NeuViz 16 enables
hospitals and private practices with limited space to install a 16-slice CT
scanner where previously only a single-slice system could be accommodated.

Rest Assured
with Remote Service Capabilities*
The Neusoft Remote Service package continuously links the
NeuViz 16 scanner directly to our online service center
to proactively detect performance deviations and prevent
further damage.
The Remote Service package provides ease of mind by ensuring
that your NeuViz 16 is running at maximum performance and
continually being serviced by technical experts.
*Optional. Broadband Internet is required.

N E U V I Z 1 6 T E C H N I C A L S P E C I F I C AT I O N S

Generator
Maximum output: 50kw
MA range: 30mA~420mA
KV switch: 90KV, 120KV, 140KV

Phantom:
1. Tower phantom (7inch, 10inch) for system calibration
2. Step phantom for system calibration
3. Philips System Phantom for QA purpose

Detector

X-Ray Tube

Material: Solid-State GOS

Number of elements: 16,128
Active elements per slice: 672
Detector arrangement: 24 rows
Slip ring: Capacitive -1.1 Gbps transfer rate
Scan collimation: 16x1.5mm, 12x1.5mm, 10x1.5mm,
16x0.75mm, 12x0.75mm, 10 x0.75mm,
8x0.75mm, 2x0.75mm, 4x0.75mm
Data acquisition rate: 1160, 2320, 4640 views/rotation
Image quality
Spatial resolution: 15.0 lp/cm @ cut-off [512X512 matrix,
120KV, 250mAs, FOV 50mm, 12mm, ED,
System Phantom, 22.38 mGy]
Low contrast resolution: 4.0 mm @ 0.3% [120kVp, 250 mAs, 9mm
250mm FOV, USA filter, 39.8mGy surface,
20 cm CATPHAN phantom]
Noise: 0.35%
[120kVp, 250mAs, 9mm, 250mm FOV, SA
filter, 20 cm water equivalent phantom]
Absorption range: -1024 to +3072 Hounsfield units
Absorption rate: 98%
CTDI: [120KV, 180mA, 1.0s, 16*1.5mm]
Head: 15.8 mGy/100mAs surface
14.3 mGy/100mAs Center
Body: 9.6 mGy/100mAS surface
4.6 mGy/100mAs Center

Dynamic Focal Spot (DFS) doubles the data sampling density effectively
doubling the number of detectors and providing high spatial resolution in
axial and spiral scanning.
Beam fan angle: 52 degree
Collimator type: lead, 4mm.
Filter: (Ti (Thickness: 1.2mm) + Teflon (Thickness:
2mm)) equiv 6.68mm Al

Anode storage capacity: 5.0 MHU

Focal spots: 0.5x1.3mm (small)
1.0x1.3mm (large)
Anode rotate speed: 6300 RPMISO
Center to focal spot distance: 570mm
Focus to detector distance: 1040mm
Anode continuous cooling rate: 6KWMax.
Anode heat dissipation rate: 9.6KW (815 kHU/min)
Cooling Mode: oil cooling

Gantry System
Gantry aperture: 700mm (700mm10mm)
Gantry tilt: +/-30 (0.5increments) accuracy +/- 2
Scan speed(s/360): 0.5s, 0.6s, 0.75s, 1.0s, 1.5s, 2s (Partial scan
speed: 0.33s for 240)
Scan localizer: (Laser positioning lamp) sagittal and
transverse localizer

Patient Table System

Longitudinal Motion
Manual stroke: 1580 mm
Scannable range: 1500 mm
Max scan range: 1500mm
Speed: 0.1 to 100 mm/sec.
Position accuracy: 0.25 mm
Vertical Motion
Range: 430 to 970 mm above floor; 1.0 inc
Table load capacity: 200 kg (440 lbs.) with 0.25mm z-axis
accuracy
Speed: 9mm~15mm/sec.
Floating tabletop: Carbon-fiber tabletop with foot pedal and
push button table brake release

Scan and Image Acquisition

Scout Scanning
Scan orientation: PA, AP, LAT
Scan range: 50m~1500mm
Scan speed: 100mm/sec.
FOV variable: 50-500mm
Spiral Scanning
Multiple, bi-directional, contiguous slices acquired simultaneously with continuous table
movement during scans.
Spiral exposure: Up to 100 sec. of uninterrupted
spiral scanning (Power<36kW, acquisition
time max = 102s, 36kW<Power<42kW,
acquisition time max = 80s, Power>42kW,
acquisition time max = 60s)

Spiral pitch: 0.5 to 1.5 (user selectable 0.1 inc or auto

pitch factor 0.5, 0.6, 0.67, 0.86, 1.0, 1.2,
1.5)
Slice thickness: 0.75mm, 1mm, 1.5mm, 2mm, 2.5mm,
3mm, 4mm, 5mm, 6mm, 7mm, 8mm,
9mm, 10mm
Axial Scanning
Multiple-slice scan with up to 16 contiguous slices acquired simultaneously
with incremental table movement between scans.
Fused modes for reconstructing partial volume artifacts free thick slices
from thin slice acquisition.
Slice thickness: 0.75mm, 1.5mm, 3mm, 4.5mm, 6mm, 9mm and 12mm.
Dynamic Multi-scanning
Multiple (continuous) axial scanning without table movement for fast dynamic
contrast study.
Dynamic scan: 1s, 2s, 3s
Cycle time: 0.6s
Scan times 0.5, 0.6, 0.75, 1, 1.5, 2 seconds for
full 360 scans
Manual Scanning places slice-by-slice scans under operator, triggered by
enable button or foot pedal.

Console Computer
Dell Precision T5400 Workstation
Operating system: Windows XP
CPU frequency: >=2GHz (Xeon processor)
Graphic processor: 1 GPU
Memory: 8GB
Hard disk capability: 750GB

Max. storage of images: Storage capacity >= 400,000

DVD RW driver: 7500 images of 512 matrix/per 4.7GB Disk
with embedded DICOM viewer
User interface: CH & EN
Monitor: 19 LCD
Monitor resolution matrix: 1280x1024
DICOM 3.0 configuration: DICOM Print/Store; DICOM Send
Option configurations: DICOM MPPS/DICOM Modality Worklist
(HIS/RIS)
Connectivity: 10/100/1000Mbps (10/100/1000BaseT)
UPS: APC UPS for console 1000VA, 670W, 4.5A

CT Site Planning
Dimensions & Weight
Gantry: 2244mm(L) x 890mm(W) x 1920mm(H)
Gantry weight: <=1900kg
Gantry package: 2370mm(L) x 1030mm(W) x 2250mm(H)
Couch: 2420mm(L) x 575mm(W) x 1055mm(H)
Couch weight: <=430kg
Couch package: 2570mm(L) x 970mm(W) x 1230mm(H)
Console table: 1400mm(L) x 800mm(W) x 760mm(H)
Power Supply Requirement
Power capacity: 80KVA
Input voltage: 3-phase 4-line (with isolation transformer),
power supply from these options:
200/208/220/230/240/380/400/415/440/4
60/480VAC

Voltage variation: tolerance +10%

Drop with loading: 5% of the rating
3-phase unbalance: 5%
Frequency: 50Hz/60Hz1Hz
Grounding resistance: Independent grounding
Resistance <4: Common grounding resistance<1
Environment Requirements
Minimum area of scan room: 18 m2Min.
Area of operating room: 4.8 m2
Recommended room size: 20 m2
Minimum height of ceiling: 2300 mm
Temperature of scan room: 18C~24C
Temperature of control room: 15C~30C
Humidity of scan room: 30%~60%
Humidity of control room: 20%~ 80%
Atmospheric pressure: 70kPa~106kPa
Temperature of transportation
and storage: -20C+55C Shock is less than 10G with package
Humidity of transportation
and storage: 10%90% (no-condensing)
Atmospheric pressure: 50kPa106kPa
Running noise: <70dB(A) (1 meter distance)
Heat dissipation:
Gantry: 26,638 BTU/hr
Computer: 2,561 BTU/hr

About Neusoft
Neusoft, the largest IT solutions and services provider
in China, offers a rich portfolio of products and solutions
across industries including: telecommunications, electric
power, FSI manufacturing and trade logistics, healthcare,
education and transportation.
Neusoft Medical Systems offers a comprehensive portfolio
of digital medical imaging systems including CT and MRI
scanners, digital X-ray equipment and diagnostic ultrasound
systems. In recognition of our development efforts,
Neusoft received the 2010 Frost and Sullivan New Product
Innovation Award for remarkable contribution to sustaining
innovative new product development in the medical
imaging industry.
Neusoft Medical provides powerful yet affordable medical
technology to over 60 countries and regions, with more
than 5,000 customers worldwide.

Neusoft Medical Systems USA, Inc.

12941 N. Freeway, Suite 633
Houston, TX 77060
http://medical.neusoft.com/en
Tel: (866) 520-2626
[email protected]

Neusoft Medical Systems

Neusoft Park
Huannan Industrial Area
New & High-Tech Development Zone
110179, P.R. China
Tel: (86 24) 8366 5681
[email protected]

Neusoft Medical (Middle East) FZ - LLC

Dubai Healthcare City, Building 26 Al Bakar
Office # 705/706
P.O. Box 115321 - Dubai, UAE
http://medical.neusoft.com
Tel: +971 4 44 04 885
[email protected]

12/11