Visual Body, Visual Connections, Black Light Connections: International Limited
Uploaded by
Michael OkwuwaVisual Body, Visual Connections, Black Light Connections: International Limited
Uploaded by
Michael OkwuwaJC International Limited RC.
413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15483
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
RMJ 050120201
X-OVER SUB
DS 55
7.3/16
6.23/32
11/16
5.7/8
OK
4IF
7.3/16
2.3/16
4.11/16
OK
ACC
1.85
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
1 0 0 0 1
COMMENTS:
FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
JC International Limited RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15484
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
RMI 0501202.15
CIRCULATING SUB
PIN
PIN
DS 55
7.1/4
1.1/2
6.13/16
5.1/2
OK
ACC 1.10
2" WECO
7.1/4
1.1/2
OK
ACC
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
1 0 0 0 1
COMMENTS:
FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
JC International Limited RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15485
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
2040019
X-OVER SUB
5.1/2 FH
7.1/4
6.15/16
5/8
5.15/16
8.1/4
GT
NC 50
7.3/16
2.3/8
6.11/16
4.11/16
3/4
4.7/16
SD
ACC
1.70
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
0 0 0 1 1
COMMENTS:
NOT FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
JC International Limited RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15486
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
JC 001
X-OVER SUB
NC 50
6.3/8
6.1/8
3/4
5.5/16
OK
4IF
6.3/16
2.13/16
6.1/8
4.7/16
OK
ACC
2.05
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
1 0 0 0 1
COMMENTS:
FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
JC International Limited RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15487
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
003
X-OVER SUB
5.1/2 FH
6.15/16
6.13/16
9/16
5.7/8
OK
NC 50
6.15/16
2.7/8
6.19/32
4.1/2
OK
ACC
1.38
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
1 0 0 0 1
COMMENTS:
FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
JC International Limited RC. 413243
Port Harcourt Office: Plot 5 JC Street, Off Peter Odili Road, P.O. Box 6427 Trans Amadi Port Harcourt, Rivers State. Tel: +234-84-489909 Lagos Office: 56A Bourdillon Road, P.O. Box 52224 Ikoyi. Tel: +234-1-842-5813 E-mail: [email protected] Website: www.jcinternationalng.com
DRILLING TOOLS & SUBS INSPECTION REPORT
ROTARY SHOULDER CONNECTIONS
CUSTOMER: OANDO ENERGY SERVICES
RIG: INTEGRITY
LOCATION: OFFSHORE
REPORT NO.
P.O.NO.
15488
W.O.NO.
DATE: 03/04/2013
INSPECTION PROGRAM:
VISUAL BODY, VISUAL CONNECTIONS, BLACK LIGHT CONNECTIONS
SPECIFICATION: DS-1 STANDARD. CAT. 3-5 CATEGORY 1 2 3-5 HDLS MPI on Critical Area Length (Ft.) ALL DIMENSIONS IN INCHES BOX TOOL JOINT Counterbore Boreback/Floatbore Depth Dia Length Dia. PIN TOOL JOINT Lead Gauge Tong Space Cond. Conn. Type OD ID Bevel Dia. SRG Dia SRG Width Conn. Length
Pin Nose
ID. NO
DESCRIPTION
Conn. Type
OD
Bevel Dia.
Tong Space
Cond.
REMARK
AOSX 0696
X-OVER SUB
NC 50
6.1/2
6.1/8
5/8
5.15/16
16.5/8
OK
5.1/2 FH
7.11/16
7.1/2
4.15/16
18.5/8
OK
ACC
3.00
SD = Seal Damaged TD = Thread Damaged BB = Belled out Box ST = Streched Threads GT = Galled Threads
CRK = Crack WO = Wash Out PS = Pitted Seal PT = Pitted Threads CT = Corroded threads
RF = Refaced ACC = Acceptable REJ = Rejected N/A = Not Applicable HB = Hard Band
LENGTHS READY FOR USE LENGHTS WITH PIN CONN. REJECTED LENGHTS WITH BOX CONN. REJECTED LENGHTS WITH PIN & BOX CONN. REJECTED TOTAL LENGTHS INSPECTED
1 0 0 0 1
COMMENTS:
FIT FOR USE
CUSTOMER SIGNATURE:..
DATE:
INSPECTOR:
NNANNA COLUMBUS
ASNT LEVEL II
Member
