VMware Vsphere 5.1 Install Configure Manage Lab Manual

VMware vSphere: Install, Configure, Manage
Student Lab Manual ESXi 5.1 and vCenter Server 5.1
VMware Education Services VMware, Inc. www.vmware.com/education
VMware vSphere: Install, Configure, Manage ESXi 5.1 and vCenter Server 5.1 Part Number EDU-EN-ICM51-LAB-STU Student Lab Manual Revision A Copyright/Trademark Copyright 2012 VMware, Inc. All rights reserved. This manual and its accompanying materials are protected by U.S. and international copyright and intellectual property laws. VMware products are covered by one or more patents listed at http://www.vmware.com/go/ patents. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies. The training material is provided as is, and all express or implied conditions, representations, and warranties, including any implied warranty of merchantability, fitness for a particular purpose or noninfringement, are disclaimed, even if VMware, Inc., has been advised of the possibility of such claims. This training material is designed to support an instructor-led training course and is intended to be used for reference purposes in conjunction with the instructor-led training course. The training material is not a standalone training tool. Use of the training material for self-study without class attendance is not recommended. These materials and the computer programs to which it relates are the property of, and embody trade secrets and confidential information proprietary to, VMware, Inc., and may not be reproduced, copied, disclosed, transferred, adapted or modified without the express written approval of VMware, Inc. Course development: John Tuffin, Steve Schwarze, Jerry Ozbun Techincal review: John Krueger Technical editing: PJ Schemenaur Production and publishing: Ron Morton, Regina Aboud
www.vmware.com/education
TA B L E
OF
C ONTENTS
Lab 1: Installing VMware vSphere Graphical User Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Lab 2: Configuring VMware ESXi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Lab 3: Working with Virtual Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Lab 4: Using VMware vCenter Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Lab 5: Standard Virtual Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Lab 6: Accessing ISCSI Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Lab 7: Accessing IP Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Lab 8: Managing VMware vSphere VMFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Lab 9: Using Templates and Clones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Lab 10: Modifying a Virtual Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Lab 11: Migrating Virtual Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Lab 12: Managing Virtual Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Lab 13: Managing vApps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Lab 14: Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Lab 15: User Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Lab 16: Resource Pools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Lab 17: Monitoring Virtual Machine Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 Lab 18: Using Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Lab 19: Using vSphere High Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Lab 20: (Optional) Designing a Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Lab 21: Configuring VMware vSphere Fault Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Lab 22: vSphere Distributed Resource Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Lab 23: VMware vSphere Update Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Lab 24: (Optional) Installing VMware vCenter Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
ii
Lab 1
Installing VMware vSphere Graphical User Interfaces

Objective: Install student desktop components
1. Access your student desktop system. 2. Install the vSphere Client.
Preparing for the lab

Record the following information: Desktop Administrator password Location of installation software Setup language Your VMware vSphere ESXi host name ESXi host user name ESXi host root password
Lab 1 Installing VMware vSphere Graphical User Interfaces
Task 1: Access your student desktop system

In this task, you will log in to your student desktop system as user Administrator.
1. Ask your instructor how to access your student desktop system. For example, your instructor
might have you use Remote Desktop Connection.

2. Log in to your student desktop system as user Administrator, with the password that you
recorded in Preparing for the lab.
Task 2: Install the vSphere Client

In this task, you will install the VMware vSphere Client on your desktop system and verify that the installation succeeded. Students should do the steps in this task individually.
1. Go to the location of the installation software, which you recorded in Preparing for the lab. 2. Double-click autorun.exe and click Run. If Security Warning dialog boxes appear, click Run
to continue.
3. In the VMware vCenter Installer window, click vSphere Client. 4. Click Install to start the installation wizard. If Security Warning dialog boxes appear, click Run
to continue.
5. When prompted by the install wizard, perform the following actions.
Field/Setting Setup Language Welcome page End-User Patent Agreement License Agreement User Name Organization Destination Folder Ready to Install the Program
Action Select the setup language that you recorded in Preparing for the lab and click OK. Click Next. Click Next. Select I agree to the terms in the license agreement and click Next. Type VMware student. Type VMware and click Next. Accept the default and click Next. Click Install.
6. When the installation is complete, click Finish.
7. Click Exit to close the VMware vCenter Installer window. 8. Log in to your ESXi host with the vSphere Client. a. Double-click the vSphere Client icon on your student desktop system.
b. Enter the IP address or host name of your ESXi host in the IP Address/Name field. You
recorded the name in Preparing for the lab.

c. Type root for the ESXi user name and type the password that you recorded in Preparing
for the lab.

d. Click Login. e. Select Install this certificate and do not display security warnings for <host_name>
to prevent this warning from being displayed in the future.

f. Click Ignore to proceed with the connection. g. Click OK when the VMware Evaluation Notice dialog box is displayed. 9. In the Inventory pane, click Inventory to verify that your ESXi host is displayed at the top of
the inventory view on the left side of the window.

10. In the vSphere Client menu bar, select File > Exit to close the vSphere Client.
Lab 2
Configuring VMware ESXi

Objective: Configure an ESXi host
In this lab, you will perform the following tasks:
1. Connect to an ESXi host with the vSphere Client. 2. View the host hardware configuration. 3. Configure the DNS and routing information for an ESXi host. 4. Configure an ESXi host as an NTP client. 5. Configure an ESXi host to use the directory services.

Record the following information: Your VMware vSphere ESXi host name ESXi host root password Active Directory (AD) domain name Domain administrator user name Domain administrator password Preferred DNS server VMkernel default gateway Network Time Protocol (NTP) server
Lab 2 Configuring VMware ESXi 5
Task 1: Connect to an ESXi host with the vSphere Client

In this task, you will use the VMware vSphere Client to log in to an ESXi host. Students should do the steps in this task individually.
1. Log in to a system from which you can start the vSphere Client. The instructor provides you
with login procedures for your specific lab environment.

2. Double-click the vSphere Client icon on the systems desktop.
3. Enter the host name of your ESXi host, which you recorded in Preparing for the lab. 4. Type the user name root and enter the ESXi host root password that you recorded in
Preparing for the lab. Click Login.

5. If you see a certificate warning, click Ignore. 6. When the VMware Evaluation Notice window is displayed, stating when your evaluation
license expires, click OK.

7. In the vSphere Client Home page, you should see your host in the inventory panel. If you do not
see your host, click Home and click Inventory in the menu bar.
Task 2: View the host hardware configuration

In this task, you will view the health of the host hardware, as well as processor and memory information. Students should do the steps in this task individually.
1. Select your ESXi host in the inventory and click the Configuration tab. The hardware health
status view is displayed. View the status by expanding objects in the Sensor list.
TIP
When you are connected to a host through VMware vCenter Server, you use the Hardware Status tab to monitor the health of the host.
2. In the Hardware list, click Processors. View the processor model, processor speed, and other
information about your ESXi host processors.

3. In the Hardware list, select Memory. View the total physical memory and how much memory
is used by the system and how much memory is available for use by the virtual machines.
6 Lab 2 Configuring VMware ESXi
Task 3: Configure the DNS and routing information for an ESXi host
In this task, you will verify the DNS and routing information for your ESXi host. Students should do the steps in this task individually.
1. Select your ESXi host in the inventory and click the Configuration tab.
2. In the Software panel, click the DNS and Routing link. 3. Click the Properties link. 4. In the DNS Configuration panel, perform the following actions. When you are finished,
click OK. Field/Setting Domain Action Verify that the AD domain name matches the value that you recorded in Preparing for the lab. If the domain name does not match, enter the domain name that you recorded in Preparing for the lab. Use the following DNS server address If this field is populated, verify the setting matches the preferred DNS server that you recorded in Preparing for the lab. If this field is empty or incorrect, enter the value for preferred DNS server that you recorded in Preparing for the lab. Look for hosts in the following domains Default Gateway Leave the default. Click the Routing tab. Verify the IP address for the VMkernel default gateway that you recorded in Preparing for the lab. If the default gateway is not defined or is incorrect, enter the IP address that you recorded in Preparing for the lab.
5. Click OK to close the DNS and Routing Configuration dialog box.
Lab 2 Configuring VMware ESXi
Task 4: Configure an ESXi host as an NTP client

In this task, you will configure the Network Time Protocol client on the ESXi host to synchronize its time with an NTP server. Students should do the steps in this task individually.
1. Select your ESXi host in the inventory and click the Configuration tab. 2. In the Software panel, click Time Configuration. View the current settings, which show that
the NTP client is stopped and that no NTP server is defined.

3. Click Properties. The Time Configuration dialog box is displayed. 4. In the Time Configuration dialog box, perform the following actions.
Field/Setting Date and Time NTP Configuration
Action Record the date and time here: Click the box for NTP Client Enabled. Click Options.
General NTP Settings
Select Start and stop with host and click NTP Settings. In the NTP Daemon Options dialog box, click Add. Enter the NTP server name or IP address that you recorded in Preparing for the lab. Click OK to close the Add NTP Server window. Select the check box Restart NTP service to apply changes and click OK.
5. Click OK to exit the Time Configuration dialog box. 6. Verify that the Time Configuration pane lists the NTP server that you added and that the NTP
Client is listed as Running.

NOTE
If the status of the NTP Client has not changed to Running, go back to Properties dialog box and click Options. In the General panel, click Start to start the NTP service.
Task 5: Configure an ESXi host to use the directory services

In this task, you will configure your ESXi host to communicate with AD services. Students should do the steps in this task individually.
1. Select your ESXi host in the inventory and click the Configuration tab.
2. Under Software, click the Authentication Services link. 3. Click the Properties link. 4. In the Directory Services Configuration dialog box, perform the following actions.
Field/Setting User Directory Service Domain Settings Join Domain
Action Select Active Directory. Enter the AD domain name that you recorded in Preparing for the lab and click Join Domain. Enter your domain administrator user name (without the domain name) and the domain administrator password that you recorded in Preparing for the lab. Click Join Domain.
5. Click OK to close the Directory Services Configuration dialog box. 6. Verify the entries in Authentication Services Settings. 7. Leave the vSphere Client open for the next lab.
In the labs, students are now only joining the host to the AD domain. They will verify that they have configured the host/AD integration properly in lab 14. This verification is deferred because the lecture has not yet discussed AD integration (or access control in general). For now, it is sufficient for the students to have configured host/AD integration.
10
Lab 3
Working with Virtual Machines

Objective: Create and prepare virtual machines for use
1. Create a virtual machine. 2. Install a guest operating system in a virtual machine. 3. Identify a virtual machines disk format and usage statistics. 4. Install VMware Tools on a virtual machine installed with a Windows operating system. 5. Prepare your virtual machine for upcoming labs.

Record the following information: Your VMware vSphere ESXi host name ESXi host root password Virtual machine datastore name Guest operating system ISO images location Virtual machine Administrator password
Lab 3 Working with Virtual Machines
11
Task 1: Create a virtual machine

In this task, you will use the Create New Virtual Machine wizard to create a virtual machine on the your ESXi host. Students should do the steps in this task individually.
1. If the VMware vSphere Client is not already active, use it to log in to your ESXi host. Use
the root user name and the password that you recorded in Preparing for the lab.
2. In the navigation bar of vSphere Client, click Home and click the Inventory icon. 3. Right-click your ESXi host in the inventory and select New Virtual Machine. 4. When prompted by the Create New Virtual Machine wizard, perform the following actions.
Field/Setting Configuration Name (of virtual machine)
Action Click Custom and click Next. Name the new virtual machine with your first name, followed by the number of your ESXi host and a sequence number, starting with 1. For example, Greg has an ESXi host named goose06. The name of his virtual machine is Greg06-1. Click Next.
Datastore
Select the virtual machine datastore whose name you recorded in Preparing for the lab and click Next. Keep the default and click Next. Select the guest operating system that you recorded in Preparing for the lab and click Next. Keep the default and click Next. To ensure that you are configuring 384MB of memory (not GB), select MB from the dropdown menu and type 384 in the space provided. Click Next. Keep the default value of 1.
Virtual Machine Version Guest Operating System
Number of virtual processors Memory
How many NICs do you want to connect
12
Field/Setting NIC 1 Network NIC 1 Adapter Connect at Power On SCSI Controller Disk Disk Size Disk Provisioning Location Virtual Device Node Mode Independent Ready to Complete
Action Keep the default. Keep the default. Leave selected and click Next. Keep the default and click Next. Keep the default and click Next. Type 2GB. Click Thin Provision. Keep the default (store with the virtual machine) and click Next. Keep the default. Leave unselected and click Next. Click the Edit the virtual machine settings before completion check box and click Continue. The Virtual Machine Properties dialog box is displayed.
5. In the Hardware list, click New CD/DVD (adding). 6. Click Datastore ISO file. 7. Click Browse and go to the ISO images location that you recorded in Preparing for the lab. 8. Click Open. 9. Select the ISO image that corresponds to the guest operating system that you selected during
virtual machine creation and click OK.

10. In the Virtual Machine Properties dialog box, select the Connect at power on check box. 11. Click Finish to save the changes. 12. Expand the inventory and verify that the new virtual machine is displayed in the inventory
panel.
13
13. In the inventory panel, select the virtual machine that you created and click the Summary tab.
Record the following information. Summary tab field Provisioned Storage Not Shared Storage Used Storage Virtual machine 1
Task 2: Install a guest operating system in a virtual machine

In this task, you will monitor an unattended installation of a Windows guest operating system in the virtual machine from the virtual machine console. Students should do the steps in this task individually.
1. On the Summary tab, click Power On in the Commands panel. 2. Click the Open Console link and monitor installation progress.
The Windows guest operating system should perform an unattended installation. After your virtual machine powers on, it begins to install the guest operating system. The installation might take up to 25 minutes.
3. After the installation has completed, click Connect/disconnect the CD/DVD devices of the
virtual machine (the right-most active icon) in the icon bar of the virtual machine console window.
4. Select CD/DVD Drive 1 > Disconnect from datastore image. Click Yes to confirm that you
want to disconnect the device. Leave the virtual machine console open.
Task 3: Identify a virtual machines disk format and usage statistics

In this task, you will identify the virtual machine disk (VMDK) type. Students should do the steps in this task individually.
1. Right-click the <your_name>##-1 virtual machine in the inventory and select Edit Settings. 2. In the Hardware list, select Hard disk 1. 3. Under Disk Provisioning, identify the VMDK type. What type of VMDK has been
provisioned?______________
ANSWER: The disk type should read Thin Provision.
14
4. Click Cancel to close the Virtual Machines Properties dialog box. 5. Click the <your_name>##-1 virtual machine and click the Summary tab. 6. In the Resources panel, click the Refresh Storage Usage link to update the Provisioned
Storage and Used Storage metrics. Record the new values in the following table. Summary tab field Provisioned Storage Not Shared Storage Used Storage Virtual machine 1
Compare these values to the values listed in task 1, step 13. The values should be different. Although a 2GB virtual VMDK has been configured for this virtual machine, the storage space consumed by the VMDK is lower than the total allocated disk space. The used storage space increases dynamically as the virtual machine is used.
Task 4: Install VMware Tools on a virtual machine installed with a Windows operating system
In this task, you will install VMware Tools on the guest operating system. Students should do the steps in this task individually.
1. From the virtual machine console, log in to the guest operating system: a. In the menu bar of the virtual machine console, select VM > Guest > Send Ctrl+Alt+Del. b. In the Windows login screen, log in as user Administrator with the virtual machine
Administrator password that you recorded in Preparing for the lab.

2. Install VMware Tools into the Windows guest operating system: a. In the menu bar of the virtual machine console, select VM > Guest > Install/Upgrade
VMware Tools.
TIP
If you are unable to move the pointer to the menu bar, press Ctrl+Alt to release the pointer from the virtual machine console.
b. Read the warning message that is displayed and click OK. c. Click anywhere in the virtual machine console window to give mouse focus to your virtual
machine.
Lab 3 Working with Virtual Machines 15
d. The VMware Tools installation wizard starts. On the welcome page, click Next. e. On the Setup Type page, leave Typical selected and click Next. f. Click Install to start the installation. Over the span of several seconds, several windows are
displayed.
3. If you see a pop-up window informing you that hardware acceleration is not enabled, click Yes
and do steps 4a4c. If you do not see the pop-up window, hardware acceleration is already enabled. Go to step 5.
a. In the Display Properties dialog box, click the Settings tab and click the Advanced button.
You might have to move the VMware Tools Installation wizard to the side so that you can see the Display Properties dialog box.
b. Click the Troubleshoot tab. Drag the Hardware Acceleration bar from None to Full.
Click OK.
c. Click OK to exit the Display Properties dialog box. 4. Click Finish to exit the VMware Tools Installation wizard. 5. When prompted to restart the virtual machine, click Yes. 6. After the virtual machine finishes rebooting, log in as user Administrator.
Leave the virtual machine console open.
Task 5: Prepare your virtual machine for upcoming labs

In this task, you will connect to the ClassFiles-vSphere.iso image file and copy programs to your virtual machines desktop. This ISO image contains files needed for future labs. You will also turn off automatic updates to prevent your virtual disk from filling up with unnecessary files. Students should do the steps in this task individually.
1. Connect ClassFiles-vSphere.iso to your virtual machines CD-ROM drive: a. In the icon bar of the virtual machine console window, click the Connect/disconnect the
CD/DVD devices of the virtual machine icon (the right-most active icon).
b. Select CD/DVD Drive 1 > Connect to ISO image on a datastore. c. Select Classfiles-vSphere.iso and click OK. 2. Open your virtual machine console. If autorun does not open the CD-ROM, use Windows
Explorer and go to the CD-ROM drive (D:).

3. Copy the following files from the CD-ROM drive (D:) to the virtual machines desktop:
cpubusy.vbs iometer.exe
16 Lab 3 Working with Virtual Machines
NOTE
To copy files from the CD-ROM to the desktop, right-click the file on the CD-ROM and select Copy. Right-click the desktop and select Paste. You will use these files in a later lab.
4. Extract the files from the executable extpart.exe (to be used in a later lab): a. On the CD-ROM, double-click the file extpart.exe. b. In the WinZip Self-Extractor dialog box, click Unzip. Two files are unzipped to the path
C:\dell\ExtPart. Click OK.

c. Click Close to close the WinZip Self-Extractor dialog box. 5. Disconnect from the Classfiles-vSphere.iso on the CD-ROM drive: a. Right-click the virtual machine in the inventory and select Edit Settings. b. In the Hardware list, select CD/DVD Drive 1. c. Deselect the check boxes Connected and Connect at power on. Click OK. 6. Turn off automatic updates in your Windows guest operating system:
NOTE
The following steps apply to the Windows 2003 operating system. These steps help prevent the virtual machines disk from filling up with unnecessary files. A virtual machine with insufficient disk space will affect future lab exercises.
a. From the virtual machines desktop, click Start > Settings > Control Panel. b. Right-click System and select Open. c. Click the Automatic Updates tab. d. Select Turn Off Automatic Updates and click OK. e. Close the virtual machine console. 7.
Log out of your vSphere Client session (File > Exit.)
Task 2, step 2: Tell students to take a break while their guest operating system is installing. Task 3, step 6: The values Not Shared Storage and Used Storage should be the same for the virtual machine. But when, for example, linked clones are used, the values should be different. By the end of the lab, assuming the student has followed directions correctly, the virtual machine called <your_name>##-1 has a 2GB thin-provisioned virtual disk.
17
18
Lab 4
Using VMware vCenter Server

Objective: Perform basic vCenter Server inventory operations
1. Configure the VCVA for first use. 2. Install vSphere license keys. 3. Create a vCenter Server inventory datacenter object. 4. Create vCenter Server inventory folder objects. 5. Add your ESXi host to the vCenter Server inventory. 6. Use the web console to configure the vCenter Server Appliance to use Directory Services. 7. Use the vSphere Web Client to log in to the vCenter Server Appliance.
:
4

Record the following information: VMware vCenter Server Appliance name vCenter Server Appliance user name vCenter Server Appliance password Your VMware vSphere ESXi host name
Lab 4 Using VMware vCenter Server 19
ESXi host root password Enterprise Plus license key vCenter Server license key Windows Domain Administrator user name Windows Domain Administrator password
Task 1: Configure the VCVA for first use

In this task, you will connect to the vCenter Server Appliance management page and configure the appliance. Students should do the steps in this task as a team from a single student desktop.
1. Open a web browser and connect to the VCVA appliance management page at https://
<VCVA_appliance_name>:5480/
2. If you get a warning that the site security certificate is not trusted, proceed anyway to the
administration page.
3. On the VCVA Login page, log in as root with the password you recorded in Preparing for the
lab and click Login.

a. Select Install this certificate and do not display security warnings for <host_name>
to prevent this warning from being displayed in the future.

b. Click Ignore to proceed with the connection. c. Click OK when the VMware Evaluation Notice dialog box is displayed. 4. On the vCenter Server Setup page, click Accept license Agreement and click Next. 5. On the Configure Options page, click Configure with default settings and click Next. 6. On the Review configuration page, click Start. 7. Once the setup is complete, click Close. 8. Close the web browser and return to the client desktop.
Task 2: Install vSphere license keys

In this task, you will install license keys to unlock advanced features of VMware vSphere 5.X. Students should do the steps in this task as a team from a single student desktop
1. Start the VMware vSphere Client. Use it to log in to your vCenter Server Appliance with
the user name and password that you recorded in Preparing for the lab.
20
Lab 4 Using VMware vCenter Server
2. Select Home > Administration > Licensing. The Licensing pane is displayed.
3. In the Product list, expand Evaluation Mode and expand No License Key. Your vCenter
Server Appliance is in the list.

NOTE
The Reporting tab enables you to monitor vRAM use.

4. Click the Manage vSphere Licenses link at the top of the tab. 5. When prompted by the Manage vSphere Licenses wizard, perform the following actions.
Field/Setting Add License Keys
Action In Enter new vSphere license keys (one per line), enter the vCenter Server license key and the vSphere Enterprise license key. (You recorded these keys in Preparing for the lab.)
TIP
Include the hyphens: XXXXX-XXXXX-XXXXX-XXXXXXXXXX. (The text box forces you to enter a hyphen every five characters.) In Enter optional label for new license keys, type VMware Training Licenses. Click Add License Keys. Click Next.
21
Field/Setting Assign Licenses
Action Click the vCenter Server tab. In the vCenter Server tab, your vCenter Server Appliance is an unlicensed asset. The Product column on the right shows that your vCenter Server Appliance has no license key. Assign the license to your vCenter Server appliance by clicking the 25-character vCenter Server 5 Standard license key. Click Next.
Remove License Keys Confirm Changes
Click Next. Click Finish.
6. View the Product report in the Licensing pane.
Task 3: Create a vCenter Server inventory datacenter object

In this task, you will add a datacenter object to the vCenter Server inventory. Students should do the steps in this task as a team from a single student desktop.
1. Select Home > Inventory > Hosts and Clusters. 2. Click the New Datacenter icon above your vCenter Server Appliance name.
3. When the datacenter object is displayed in the inventory, type Training for the datacenter
name.
22
Task 4: Create vCenter Server inventory folder objects

In this task, you will add folder objects to the vCenter Server inventory. Students should do the steps in this task as a team from a single student desktop.
1. Select Home > Inventory > Hosts and Clusters. 2. Ensure that the Training datacenter is highlighted and click the New Folder icon above your
vCenter Server Appliance name.
3. Type Lab Servers for the folder name. 4. Select Home > Inventory > VMs and Templates. 5. Expand the inventory. 6. Click the Training datacenter and click the New Folder icon.
7. Type LabVMs for the folder name. 8. Click the Training datacenter and click the New Folder icon. Type Templates for the name of
this second folder. How does the list of inventory objects differ between the Hosts and Clusters view and the VMs and Templates view?
ANSWER: A folder object is displayed only in the view in which it was created. In other words, the Lab Servers folder is displayed only in the Hosts and Clusters view. The folders named LabVMs and VMTemplates are displayed only in the VMs and Templates view. Also, the folder icons look different in the two views.
23
Task 5: Add your ESXi host to the vCenter Server inventory

In this task, you will add your ESXi host to the Lab Servers folder in the vCenter Server inventory and view general information about your ESXi host. Students should do the steps in this task individually.
1. Select Home > Inventory > Hosts and Clusters. Click your Lab Servers folder and click the
Add Host icon above your vCenter Server Appliance name.
2. When prompted by the Add Host wizard, perform the following actions.
Field/Setting Host Username Password
Action Enter the fully qualified domain name of your ESXi host, which you recorded in Preparing for the lab. Type root. Enter the ESXi host root password that you recorded in Preparing for the lab. When you click Next, a security alert is displayed, stating that vCenter Server is unable to verify the authenticity of the specified host. Click Yes to proceed.
Host Summary Assign License
Verify the information and click Next. Select the VMware vSphere 5 Enterprise Plus license and click Next. Ignore any license warnings that might be displayed. Click Next. Do not enable lockdown mode. Click Next. Expand the Training datacenter and click the LabVMs folder. Click Next. Review the configuration summary and click Finish.
Lockdown Mode Virtual Machine Location Ready to Complete
24
3. In the Recent Tasks pane at the bottom of the vSphere Client, monitor the progress of the task.
After the task is finished, expand the Lab Servers folder and verify that your ESXi host is displayed in the inventory.
4. Click your ESXi host. 5. Click the Summary tab. View information about the ESXi host, such as its datastores,
networks, number of network interface cards (NICs) and CPUs, and memory usage.
6. Select Home > Inventory > VMs and Templates. 7. Click the LabVMs folder. You should see your virtual machine.
Remain logged in and minimize the vSphere Client open for the next lab.
Task 6: Use the web console to configure the vCenter Server Appliance to use Directory Services
In this task, you will configure the vCenter Server Appliance to use Directory Services. Students should do the steps in this task as a team from a single student desktop.
1. On the desktop of your Desktop system, double-click Google Chrome. 2. In the Google Chrome browser, navigate to the URL https://
<VCVA_appliance_name>:5480.
3. Log in to your vCenter Server Appliance with the user name and password that you recorded in
Preparing for the lab.

4. On the vCenter Server tab, click Authentication. 5. On the Authentication page, mark the Active Directory Enabled check box. 6. In the Domain text field, type vclass.local. 7. Enter the user and password text fields, type the Windows Domain user name and password that
you recorded in Preparing for the lab.

8. Click Save Settings.
NOTE
At the top of the page, under AD Authentication Settings the operation is confirmed by green text.
9. At the top of the Google Chrome browser, click the System tab. 10. Click Reboot.
25
11. On the System Reboot confirmation, click Reboot.

NOTE
The appliance takes several minutes to reboot. The System Reboot dialog box disappears after the reboot is near completion.
12. Log in to your vCenter Server Appliance with the user name and password that you recorded in

13. On the Summary page, in the Services window, monitor the services listed until four of the
five services are listed as Running.

NOTE
The vSphere Auto Deploy service is not started in this lab.

14. Click Logout user root. 15. Leave the browser open for the next task.
Task 7: Use the vSphere Web Client to log in to the vCenter Server Appliance
In this task, you log in to the vSphere Web Client and view general information about your vCenter Server Appliance environment. Students should do the steps in this task individually.
1. In the Google Chrome browser, navigate to the URL https:// <VCVA_appliance_name>:9443/vsphere-client/. 2. Log in to your vCenter Server Appliance with the vCenter Server Appliance user name and
password that you recorded in Preparing for the lab.

3. In the navigation bar on the left, click vCenter and select Datacenters under Inventory on the
left navigation pane.

4. What is the name of the datacenter listed?
ANSWER: Training
5. In the navigation bar on the left, click Training to view the list of top level objects in the right
pane.
6. When finished reviewing the list of objects, close the Google Chrome browser.
Task 1, step 5: In the VMware vClass environment, have the students run the Get Eval Licenses PowerShell script located in the Lab Files folder. The Get Eval Licenses script populates a text file named vSphereLicense.txt, in the Lab Files\Evaluation Licenses folder.
26
Lab 5
Standard Virtual Switches

Objective: Create a standard virtual switch and port group
1. View the current standard virtual switch configuration. 2. Create a standard virtual switch with a virtual machine port group. 3. Attach your virtual machine to a virtual switch port group.

Record the following information: VMware vCenter Server system name vCenter Server user name vCenter Server password vmnics to use for the Production virtual switch Virtual machine Administrator password
Lab 5 Standard Virtual Switches
27
Task 1: View the current standard virtual switch configuration

In this task, you will use the VMware vSphere Client to view the current network configuration. Students should do the steps in this task individually.
1. If the vSphere Client is not already active, use it to log in to your vCenter Server system with
the root user name and password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters. 3. In the vCenter Server inventory, select your VMware vSphere ESXi host and click the
Configuration tab.
4. In the Hardware list, select Networking. You see that a standard virtual switch was created
when this host was installed. The virtual switch is named vSwitch0. It contains a VMkernel port named Management Network and a virtual machine port group named VM Network. You see a virtual machine connected to VM Network.
Task 2: Create a standard virtual switch with a virtual machine port group
In this task, you will create a standard virtual switch for virtual machine networking and create a port group named Production. Students should do the steps in this task individually.
1. Click the Add Networking link. 2. When prompted by the Add Networking wizard, perform the following actions.
Field/Setting Connection Type Network Access
Action Virtual Machine and click Next. Select Create a vSphere standard switch. Select the vmnic check boxes, which you recorded in Preparing for the lab. Click Next.
Connection Settings Ready to Complete
In Network Label, type Production. Keep the default for the VLAN ID and click Next. Click Finish.
3. Verify that the Production port group is displayed in the Networking pane.
28
Task 3: Attach your virtual machine to a virtual switch port group

In this task, you will verify that your virtual machine can access the Web using the Production port group. Students should do the steps in this task individually.
1. Right-click your named virtual machine in the inventory and select Edit Settings. 2. Click Network Adapter 1. 3. In the Network Connection drop-down menu, select Production. 4. Verify that both the Connected and the Connect at power on check boxes are selected. 5. Click OK to dismiss the Edit Settings window. 6. Verify that your virtual machine can access the Web: a. Renew the virtual machine IP address:
Right-click the virtual machine in the vCenter Server inventory and select Open Console. Log in with Administrator and the virtual machine Administrator password that you specified in Preparing for lab and open a Command Prompt window (Start > Run).
Type cmd. At the command prompt, type ipconfig /release and press the Enter key. Type ipconfig /renew and press the Enter key.
b. In Internet Explorer, go to http://www.vmware.com. c. Exit Internet Explorer. d. Close the virtual machines console.
Leave the vSphere Client open for the next lab.
29
30
Lab 6
Accessing ISCSI Storage

Objective: Configure access to an iSCSI and NFS datastore
1. Add a VMkernel port group to a standard virtual switch. 2. Configure the iSCSI software adapter.

Record the following information: VMware vCenter Server system name vCenter Server user name vCenter Server password VMkernel port IP address/subnet mask VMkernel default gateway Your VMware vSphere ESXi iSCSI qualified name (IQN) Name of iSCSI target
Lab 6 Accessing ISCSI Storage
31
Task 1: Add a VMkernel port group to a standard virtual switch

In this task, you will create a VMkernel port group named IP storage on vSwitch0. Students should do the steps in this task individually.
1. If the VMware vSphere Client is not already active, use it to log in to your vCenter Server
system with the root user name and password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters. 3. In the vCenter Server inventory, select your ESXi host and click the Configuration tab. 4. In the Hardware list, click Networking. You see that a standard virtual switch was created
when this host was installed.

5. Click the Properties link for vSwitch0. 6. In the Ports tab (the default view in the vSwitch0 Properties window), click Add. 7. When the Add Network wizard starts, perform the following actions.
Field/Setting Connection Type Port Group Properties Use this port group for vMotion Use this port group for Fault Tolerance logging Use this port group for management traffic Use the following IP settings
Action Select VMkernel and click Next. Type IP Storage for the Network Label. Keep the default for the VLAN ID. Leave deselected. Leave deselected. Leave deselected. Click Next. Enter the VMkernel port IP address and subnet mask that you recorded in Preparing for the lab. Verify that the VMkernel default gateway IP address is correct. Click Next.
Summary
Click Finish.
8. Click Close in the vSwitch0 Properties window.
32
Lab 6
Task 2: Configure the iSCSI software adapter

In this task, you will enable the iSCSI software initiator, configure dynamic discovery, and display the iSCSI software adapter properties. Students should do the steps in this task individually.
1. Select Home > Inventory > Hosts and Clusters. 2. In the Hardware list, select Storage Adapters. 3. Click the Add link. 4. Click Add Software iSCSI Adapter. 5. Click OK when the warning dialog box is displayed. 6. Select iSCSI Software Adapter in the Device column. 7. Click the Properties link in the Details pane. The iSCSI Initiator Properties dialog box is
displayed.
8. Verify that the General tab displays the iSCSI initiator name and a status of Enabled. Leave the
Properties dialog box open. If the IQN does not match what you recorded in Preparing for the lab, click the Configure button. Change the IQN to match the value in Preparing for the lab.
9. Click the Dynamic Discovery tab and click Add. 10. Enter the name or IP address of the iSCSI target that you recorded in Preparing for the lab. 11. Leave the port set to 3260 and click OK. 12. Monitor the Recent Tasks pane and wait for the task to complete. 13. Verify that the iSCSI targets name and port number are listed in the Send Targets panel and
click Close.
14. When you are prompted to rescan the host bus adapter, click Yes. Wait for the rescan task to
complete.
15. Select the iSCSI software adapter from the Storage Adapters list and view the Details pane.
Record the values for the following fields to verify that a logical unit number was found. Field/setting Connected targets Devices Paths Value
Lab 6 Accessing ISCSI Storage
33
34
Lab 6
Lab 7
Accessing IP Storage
Objective: Configure access to an iSCSI and NFS datastore
1. Configure access to NFS datastores. 2. View iSCSI and NFS storage information.

Record the following information:
VMware vCenter Server system name vCenter Server user name vCenter Server password NFS server host name Path to your NFS datastore
Lab 7 Accessing IP Storage
35
Task 1: Configure access to NFS datastores

In this task, you will mount an NFS datastore with read/write permissions. Students should do the steps in this task individually.
1. Click the Configuration tab of your ESXi host. 2. In the Hardware list, select Storage. 3. In the Datastores pane, select Add Storage. 4. When prompted by the Add Storage wizard, perform the following actions.
Field/Setting Storage Type Server Folder Mount NFS read only Datastore name
Action Select Network File System and click Next. Enter the NFS server host name or IP address that you recorded in Preparing for the lab. Enter the path to the NFS datastore that you recorded in Preparing for the lab. Leave the box unselected. You want to mount the NFS datastore as read/write. Type NFS-<your_name>. For example, NFS-Mike. Click Next.
Ready to Complete
Click Finish.
36
Task 2: View iSCSI and NFS storage information

In this task, you will view information about your iSCSI and NFS storage and you will view the contents of the NFS datastore. Students should do the steps in this task individually.
1. Click the Storage Views tab of your ESXi host. 2. In the list of reports, select Show all SCSI Paths. Verify that the iSCSI adapter that you added
earlier is in the list. You might have to click the Update link in the upper-right corner.
3. Select Show all SCSI Targets (Array Ports) from the list of reports. View information about
your iSCSI storage.

4. Select Show all NAS Mounts from the list of reports. View information about your NFS
storage. Leave the vSphere Client open for the next lab.
37
38
Lab 8
Managing VMware vSphere VMFS

Objective: Create and manage VMFS datastores
1. Review your shared storage configuration. 2. Change the name of a VMFS datastore. 3. Create a VMFS datastore. 4. Expand a VMFS datastore to consume unused space on a LUN. 5. Remove a VMFS datastore. 6. Extend a VMFS datastore.

Record the following information:
VMware vCenter Server system name vCenter Server root password Shared storage type used in this lab environment Your local datastore First assigned target/LUN number Second assigned target/LUN number
Lab 8 Managing VMware vSphere VMFS 39
Task 1: Review your shared storage configuration

In this task, you will learn how to display information about the shared storage in your lab environment. Students should do the steps in this task individually.
system. To log in, use the user name root and the password that you recorded in Preparing for the lab.
2. Select your VMware vSphere ESXi host in the inventory and click the Storage Views tab. 3. In the View list, select Show all SCSI Paths from the Reports drop-down menu. In the named
SCSI adapter type column, verify that a SCSI adapter exists for the shared storage type that you recorded in Preparing for the lab.
4. In the View list, select Show all SCSI Volumes (LUNs). This view displays all SCSI LUNs
that are available to your host.
Task 2: Change the name of a VMFS datastore

In this task, you will change the name of a VMware Sphere VMFS datastore. Students should do the steps in this task individually.
1. In the View list in the Storage Views tab, select Show all Datastores. View the information for
each datastore, such as the capacity and free space.

2. Click your local datastore, whose name you recorded in Preparing for the lab to go to the
Datastores inventory view. The Show all Virtual Machines report is displayed. This report lists all virtual machines that reside on this datastore
3. In the inventory, right-click your local datastore and select Rename. 4. Type Local-ESXi##, where ## is the number of your ESXi host. For example, for an ESXi
host that ends in 02, the new name of the datastore is Local-ESXi02.
5. Verify that the new datastore name is displayed in the inventory.
Task 3: Create a VMFS datastore

In this task, you will create a private VMFS datastore on each logical unit number (LUN) that is assigned to you. Private means that this datastore is accessible only by your ESXi host. Students should do the steps in this task individually.
1. Select Home > Inventory > Datastores and Datastore Clusters, right-click the Training
datacenter, and select Add Datastore.
40
Lab 8 Managing VMware vSphere VMFS
2. When prompted by the Add Storage wizard, perform the following actions.
Field/Setting Select host Storage Type Select Disk/LUN
Action Expand the inventory hierarchy and click your ESXi host. Click Next. Select Disk/LUN and click Next. Expand the Path ID column so that it shows the LUN numbers. Click your first assigned target/ LUN number, which you recorded in Preparing for the lab. Click Next.
File System Version Current Disk Layout Enter a datastore name
Keep the default of VMFS-5 and click Next. Review the current disk layout and click Next. Type PrivateVMFS-##, where ## is the target number of your first assigned LUN that you recorded in Preparing for the lab. For example, if the target number of your assigned LUN ID is 1, the datastore name would be PrivateVMFS-01. Click Next.
Formatting Ready to Complete
Keep the default and click Next. Click Finish.
3. Return to the Datastores inventory view to create a second datastore. Right-click the Training
datacenter and select Add Datastore.
41
4. When prompted by the Add Storage wizard, perform the following actions.
Field/Setting Select host Storage Type Select Disk/LUN
Action Expand the inventory hierarchy and click your ESXi host. Click Next. Select Disk/LUN and click Next. Expand the Path ID column so that it shows the target and LUN number. Click your second assigned target/ LUN number, which you recorded in Preparing for the lab. Click Next.
File System Version Current Disk Layout Enter a datastore name
Keep the default of VMFS-5 and click Next. Review the current disk layout and click Next. Type PrivateVMFS-##, where ## is the target number of your second assigned LUN, which you recorded in Preparing for the lab. For example, if the target number of your assigned LUN ID is 2, the datastore name would be PrivateVMFS-02. Click Next.
Formatting
Click Custom Space Setting and reduce the LUN size by 1GB. For example, if the current disk size is 10GB, change the size to 9GB. (You increase this VMFS datastore to its maximum size in task 4.) Click Next.
Ready to Complete
Click Finish.
5. Monitor the progress in the Recent Tasks pane and wait for the task to complete. 6. Verify that each new VMFS datastore is displayed in the datastore inventory. 7. In the datastore inventory, click the second PrivateVMFS-## datastore that you created. 8. Click the Summary tab and record the value for Capacity: __________.
42
Task 4: Expand a VMFS datastore to consume unused space on a LUN

In this task, you will increase the size of a VMFS datastore to consume the remaining space on the LUN. Students should do the steps in this task individually.
1. Click the Configuration tab of the second PrivateVMFS-## datastore that you created in task 3. 2. Click the Properties link in the Datastore Details pane. 3. Examine the information reported in the Extent Device pane. Record the following values:
Size of the LUN used by the PrivateVMFS## datastore: __________ Size of the VMFS datastore in the datastore: __________ Are these two values the same? ________________________________________ Why are these two values the same (or different)? _________________________
ANSWER: In vClass, the LUNs are 10GB. If the student followed the lab correctly, the VMFS datastore in the datastore should be 9GB (10GB - 1GB = 9GB). These values differ because in task 3 you had the students opt to use less than the full capacity of the LUN.
4. In the Properties dialog box, click Increase. 5. When prompted by the Increase Datastore Capacity wizard, perform the following actions.
Field/Setting Extent Device
Action Select your second assigned LUN that you recorded in Preparing for the lab. This LUN should read Yes in the Expandable column. Click Next.
Current Disk Layout Extent Size Ready to Complete
Review the current disk layout. Notice the free space available on the LUN (under Primary Partitions) and click Next. Leave the Maximize available space check box selected and click Next. Review the information for accuracy and click Finish.
6. After the task is completed, review the datastore Properties dialog box and verify that the
datastore size was increased to the maximum capacity (less space for system overhead).
7. Click Close to close the datastore Properties dialog box.
43
Task 5: Remove a VMFS datastore

In this task, you will remove a VMFS datastore. Students should do the steps in this task individually.
1. In the Datastores inventory, right-click your PrivateVMFS-## datastore, where ## is the second
LUN ID that is assigned to you.

2. Click Delete. 3. Click Yes to confirm datastore deletion. 4. Verify that the datastore was removed from the inventory.
Task 6: Extend a VMFS datastore

In this task, you will increase the size of a VMFS datastore by adding an extent. Students should do the steps in this task individually.
1. In the Datastore inventory, click the PrivateVMFS-## datastore, where ## is the number of your
first assigned LUN ID.

2. Click the Configuration tab. 3. In the Datastore Details pane, click the Properties link. The Properties dialog box is displayed.
Record the size of the total capacity of the VMFS datastore here:______________.
4. Click Increase. 5. When prompted by the Increase Datastore Capacity wizard, perform the following actions.
Field/Setting Extent Device
Action Expand the Path ID column so that it shows the LUN number. Click your second assigned LUN. You recorded this LUN number in Preparing for the lab. Click Next. Review the current disk layout. Click Next. Leave the Maximize capacity check box selected. Click Next. Click Finish.
Current Disk Layout Capacity Ready to Complete
44
6. When the task completes, verify that two extents are displayed in the Extents pane. The
Extents pane should show both of your assigned LUN IDs.

NOTE
It might be necessary to click Refresh in the Properties dialog box.

7. Close the Properties dialog box. 8. In the Datastore Details pane, record the new value for Total Formatted Capacity:
___________. The value should differ from the value recorded in step 3.
9. Rename this datastore VMFS-<student_number> where student number is the number of
your assigned ESXi host. Leave the vSphere Client open for the next lab
45
46
Lab 9
Using Templates and Clones

Objective: Deploy a virtual machine from a template and clone a virtual machine
1. Copy Sysprep files to the vCenter Server instance. 2. Create a template. 3. Create customization specifications. 4. Deploy a virtual machine from a template. 5. Clone a virtual machine that is powered on.

Record the following information: VMware vCenter Server system name vCenter Server Administrator password Location of Windows Sysprep files
Sysprep files target folder Windows product key Time zone

Lab 9 Using Templates and Clones 47
VMware vSphere VMFS datastore for virtual machines Virtual machine Administrator password
Task 1: Copy Sysprep files to the vCenter Server instance

In this task, you will configure guest operating system customization on your vCenter Server system. Students should do the steps in this task as a team from a single student desktop.
1. On the desktop of your student virtual machine, double-click WinSCP. 2. Double click Upload sysprep files to the vCVA. 3. If you receive a security warning, click Update to update the certificate. 4. In the User name field, type root and click OK. 5. Enter the password you recorded in Preparing for the lab and click OK. 6. Copy all of the files from the Sysprep folder on the desktop to the VCVA sysprep/svr2003
directory.
7. Once the file copy is complete, select Disconnect from the Session menu. 8. Close the WinSCP program.
Task 2: Create a template

In this task, you will create a template by converting a virtual machine to a template. Students should do the steps in this task individually.
1. If the VMware vSphere Client is not already active, use it to log in to your vCenter Server system. Log in as user root and enter the password that you recorded in Preparing for the
lab.
2. In the vSphere Client, select Home > Inventory > VMs and Templates. 3. Expand your LabVMs folder. In this folder, you have a virtual machine named
<your_name>##-1.
4. Right-click the virtual machine and select Power > Shut Down Guest. 5. After the virtual machine has shut down, right-click the virtual machine and select Template >
Convert to Template.
6. Drag <your_name>##-1 virtual machine template from your LabVMs folder to your Templates
folder.
7. Right-click the virtual machine template and click Rename. Type <your_name>Template to
change the template name.

48 Lab 9 Using Templates and Clones
Task 3: Create customization specifications

In this task, you will create a customization specification for template deployment. Students should do the steps in this task individually.
1. In the vSphere Client, click Home. 2. In the Management panel, click Customization Specifications Manager. 3. Click New.
Field/setting Target Virtual Machine OS Name Registration Information Computer Name Product Key
Action Select Windows. Type <your_name>-CustomSpec. Click Next. Type VMware Student for Name and VMware for Organization. Click Next. Click Use the virtual machine name and click Next. Enter the product key that you recorded in Preparing for the lab and leave all other fields at their default value. Click Next. Re-enter the vCenter Server Administrator password that you recorded in Preparing for the lab. Re-enter the password in the Confirm password field and click Next. Select the time zone that you recorded in Preparing for the lab and click Next. Leave the default and click Next. Leave the default and click Next. Leave the default and click Next. Leave the default and click Next. Click Finish.
Administrator Password
Time Zone Run Once Network Workgroup or Domain Operating System Options Ready to Complete
4. Verify that your customization specification was created successfully. Lab 9 Using Templates and Clones 49
Task 4: Deploy a virtual machine from a template

In this task, you will deploy a virtual machine from your template and allow vCenter Server to customize the guest operating system. Students should do the steps in this task individually.
1. In the vSphere Client, click Home. 2. In the Inventory panel, select VMs and Templates. Right-click your named template and
select Deploy Virtual Machine from this Template.

3. When prompted by the Deploy Template wizard, perform the following actions.
Field/Setting Name
Action Name the new virtual machine with your first name, followed by the number of your VMware vSphere ESXi host and the sequence number 2. For example, if Gregs ESXi host is named ESXi01, the name of this virtual machine is Greg01-2. Select your LabVMs folder and click Next. Expand the Lab Servers folder and click your ESXi host. Click Next. Keep the default. Select your VMFS datastore for virtual machines, which you recorded in Preparing for the lab, and click Next. Select Power on this virtual machine after creation. Select Customize using an existing customization specification. Select <your_name>CustomSpec. Do not select the check box Use the Customization Wizard to temporarily adjust the specification before deployment. Click Next.
Inventory Location Host/Cluster Select a virtual disk format Select a destination storage for the virtual machine files Guest Customization
Ready to Complete
Do not select the check box Edit virtual hardware (Experimental). Click Finish.
50
Lab 9
4. Repeat steps 2 and 3 and create another virtual machine. Name this virtual machine
<your_name>##-3.
5. In the Recent Tasks pane at the bottom of the vSphere Client, monitor the progress of the
template deployment task.

6. After you have created these virtual machines, open a virtual machine console to each of your
new virtual machines.

7. Verify that each virtual machine was created properly. Check the following:
The virtual machine booted up successfully. Wait at least two minutes for Sysprep to complete its tasks, which includes a reboot of the system. You can log in to the guest operating system as Administrator with the virtual machine Administrator password that you recorded in Preparing for the lab. VMware Tools is installed with time synchronization configured. The cpubusy.vbs file is on the desktop.
8. Close the virtual machine console. Do not shut down the virtual machine.
Task 5: Clone a virtual machine that is powered on

In this task, you will clone a running virtual machine. Students should do the steps in this task individually.
1. In the LabVMs folder, right-click the <your_name>##-2 virtual machine and select Clone. 2. When prompted by the Clone Virtual Machine wizard, perform the following actions.
Field/Setting Name
Action Name the new virtual machine Hot-Clone, followed by the number of your ESXi host. For example, Greg has an ESXi host named ESXi01. The name of this second virtual machine is HotClone01. Select your LabVMs folder and click Next. Expand the Lab Servers folder and click your ESXi host. Click Next. Keep the default.
Inventory Location Host/Cluster Select a virtual disk format
Lab 9 Using Templates and Clones
51
Field/Setting Select a destination storage for the template files
Action Select your VMFS datastore for virtual machines, which you recorded in Preparing for the lab, and click Next. Select Power on this virtual machine after creation. Select Customize using an existing customization specification. Select <your_name>CustomSpec and click Next.
Guest Customization Option
Ready to Complete
Click Finish.
3. Monitor the task in the Recent Tasks pane. Allow the task to run. Check the result during the
next lab. Leave the vSphere Client open for the next lab.
52
Lab 9
Lab 10
Modifying a Virtual Machine

Objective: Modify a virtual machines hardware and add a raw LUN to a virtual machine
1. Increase the size of a VMDK file. 2. Adjust memory allocation on a virtual machine. 3. Rename a virtual machine in the vCenter Server inventory. 4. Add a raw LUN to a virtual machine and verify that the guest operating system can see it. 5. Expand a thin-provisioned virtual disk.

Record the following information: VMware vCenter Server system name vCenter Server Administrator password Virtual machine Administrator password Your raw logical unit number (LUN) ID
10
Lab 10 Modifying a Virtual Machine
53
Task 1: Increase the size of a VMDK file

In this task, you will increase the size of a virtual machines C: drive and configure the guest operating system to see the additional space. Students should do the steps in this task individually.
system as user root, with the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > VMs and Templates. 3. Verify that your Hot-Clone## virtual machine is powered on. If it is not powered on, power it
on now.
4. Right-click your Hot-Clone## virtual machine in the inventory and select Edit Settings. The
Virtual Machine Properties dialog box is displayed.

5. In the Hardware list, select Hard Disk 1. 6. In Provisioned Size, type 3GB and click OK. 7. Increase the size of the disk from within the guest operating system: a. In the inventory, right-click the Hot-Clone virtual machine and select Open Console. b. Log in to the guest operating system as user Administrator, with the virtual machine
Administrator password that you recorded in Preparing for the lab.

c. On the virtual machine desktop, double-click My Computer. Record the value for the total
size of the C: drive.____________.

ANSWER: For example, if you are using a vClass kit, this value is approximately 2GB.
d. Use Windows Explorer to open the folder C:\dell\ExtPart folder. e. Double-click the extpart.exe file. f. In Volume to extend, type C:. g. In Size to expand the volume, type 1024 (to extend the volume by 1,024MB). h. On the virtual machine desktop, double-click My Computer to verify that the C: drive was
extended. Record the value for total size of the C: drive.____________________. Does the value differ from the size recorded in step 7c?_________
ANSWER: Yes. The value should differ by ~1GB.
i. Close the virtual machines console.
54
Task 2: Adjust memory allocation on a virtual machine

In this task, you will increase the virtual machines memory. Students should do the steps in this task individually.
1. Right-click your Hot-Clone## virtual machine in the inventory and select Power > Shut Down
Guest.
2. Click Yes to confirm the shutdown. 3. After the virtual machine has shut down, right-click it and select Edit Settings. 4. Verify that Memory is selected in the Hardware list. 5. Select MB from the drop-down menu in the upper right of the Virtual Machines Properties
dialog box.
6. Immediately to the left of the drop-down menu, type 512. 7. Click OK. 8. Click the virtual machines Summary tab to verify that the memory has increased.
Task 3: Rename a virtual machine in the vCenter Server inventory

In this task, you will change the name of a virtual machine in the inventory. Students should do the steps in this task individually.
1. In the inventory, right-click your Hot-Clone## virtual machine and select Rename. 2. Rename the virtual machine to <your_name>##-4, where ## is the number of your VMware
ESXi host. For example, if Greg has an host named ESXi01. The name of his virtual machine is Greg01-4.
CAUTION
Renaming a virtual machine in the inventory does not rename the virtual machines folder or the files in the virtual machines folder.
10
55
Task 4: Add a raw LUN to a virtual machine and verify that the guest operating system can see it
In this task, you will add a raw LUN to a virtual machine that is powered on. You will verify that the guest operating system can see the new virtual disk. Students should do the steps in this task individually.
1. Add a raw LUN to the <your_name>##-2 virtual machine: a. In the inventory, right-click the <your_name>##-2 virtual machine and select Edit
Settings. The Virtual Machine Properties dialog box is displayed.

b. In the Virtual Machine Properties dialog box, click Add. c. When prompted by the Add Hardware wizard, perform the following actions.
Field/setting Device Type Select a Disk Select Target LUN Select Datastore Compatibility Mode Advanced Options Ready to Complete
Action Select Hard Disk and click Next. Select Raw Device Mappings and click Next. Select your assigned LUN, which you recorded in Preparing for the lab. Keep the default. Select Virtual. Leave the defaults. Click Finish.
d. When a new entry for the hard disk is displayed in the Hardware list with the word
(adding) next to it, click OK to add the raw LUN.

2. In the inventory, right-click the <your_name>##-2 virtual machine that you created and select
Rename. Change the name to <your_name>##-2-RDM.

3. View the <your_name>##-2-RDM virtual machine files: a. In the inventory, select the <your_name>##-2-RDM virtual machine and click the Storage
Views tab.
b. In the drop-down menu, select Show all Virtual Machine Files. c. Click the Update link. d. Verify that a new file named <your_name>##-2_1-rdm.vmdk exists. 56 Lab 10 Modifying a Virtual Machine
4. Verify that the guest operating system can see the new disk: a. Open a console to the virtual machine and log in as user Administrator, with the password
that you recorded in Preparing for the lab.

b. Select Start > Programs > Administrative Tools > Computer Management. c. Click Disk Management.
CAUTION
If a disk wizard starts, click Cancel.

d. Verify that Disk 1 is listed. Disk 1 is the raw device mapping. You can now use the guest
operating system utilities to format the drive. In this lab, you do not have to format the drive.
e. Close the Computer Management window and close the virtual machine console.
Task 5: Expand a thin-provisioned virtual disk

In this task, you will expand a thin-provisioned virtual disk to consume all the disk space that was allocated to it when it was created. Students should do the steps in this task individually.
1. View storage information for the virtual machine named <your_name>##-3: a. In the inventory, select the virtual machine named <your_name>##-3. b. Click the Summary tab and record the storage information found in the Resources panel.
Provisioned Storage Not-shared Storage Used Storage Name of VMFS Datastore

2. Right-click <your_name>##-3 and select Power > Shut Down Guest. 3. Inflate the thin-provisioned virtual disk: a. Select Home > Inventory > Datastores and Datastore Clusters. b. Right-click the datastore that you recorded in step 1 and select Browse Datastore. c. Open the folder for the virtual machine named <your_name>##-3. d. Right-click the <your_name>##-3.vmdk file and select Inflate. Wait for the operation to
finish.
Lab 10 Modifying a Virtual Machine 57
10
e. Observe the Size and Provisioned Size columns. Each column displays a different number.
When the inflate operation finishes, the Provisioned Size column is no longer visible. The Size column displays a new value equal to the size of the virtual disk.
f. Close the Datastore Browser. 4. Select Home > Inventory > VMs and Templates. 5. In the vCenter Server inventory, select the virtual machine named <your_name>##-3. 6. Click the Summary tab. 7. Record the storage information from in the Resources panel and verify that the disk is now
fully allocated. Provisioned Storage Not-shared Storage Used Storage Leave the vSphere Client open for the next lab.
58
11
Lab 11
Migrating Virtual Machines

Objective: Use vMotion and Storage vMotion to migrate virtual machines
1. Migrate virtual machine files with Storage vMotion. 2. Create a virtual switch and a VMkernel port group for vMotion migration. 3. Verify that your ESXi host meets vMotion requirements. 4. Verify that your virtual machines meet vMotion requirements. 5. Perform a vMotion migration of a virtual machine on a shared datastore. 6. Perform a vMotion migration to a private datastore 7. Prepare for the next lab.

Record the following information: VMware vCenter Server system to decommission Team vCenter Server system name VMware vSphere ESXi host to be temporarily orphaned
Lab 11 Migrating Virtual Machines 59
vmnic for the VMware vSphere vMotion network vMotion IP address vMotion subnet mask Shared datastore for virtual machines ESXi host to migrate virtual machines to Your ESXi host
Task 1: Migrate virtual machine files with Storage vMotion

In this task, you will use VMware vSphere Storage vMotion to relocate each of your virtual machine files from your private datastore to your shared datastore. Students should do the steps in this task individually.
NOTE
In this lab and the following labs, both student A and student B will log in to the team vCenter Server system simultaneously. Because you are now both managing the same vCenter Server system, you should communicate with your teammate.
1. Open the VMware vSphere Web Client. Log in to the team vCenter Server system as user
root, with the password that you recorded in Preparing for the lab.
2. Select Home > VMs and Templates and expand the LabVMs folder. 3. Right-click <your_name>##-2-RDM and click Actions > Rename. Rename the virtual machine
to <your_name>##-2 (that is, remove -RDM from the name).

4. Migrate each of your virtual machines from your private datastore to the shared datastore: a. Select <your_name>##-2 and click the Summary tab. b. Under Storage in the Related Objects panel, record the datastore that the virtual machine
resides on here: ________________________.

c. In the vSphere Web Client inventory, right-click the <your_name>##-2 virtual machine,
and then click Migrate
60
Lab 11 Migrating Virtual Machines
d. When prompted by the Migrate Virtual Machine wizard, perform the following actions.
11
Field/Setting Select Migration Type Select a virtual disk format Select a destination storage for the virtual machine files Ready to Complete
Action Select Change Datastore. Keep the default. Select the shared datastore that you recorded in Preparing for the lab. Click Next. Click Finish.
e. Monitor the progress of the task in the Recent Tasks pane. f. After the task is finished, click the Summary tab of the virtual machine that you migrated
to verify that your virtual machine is on the new datastore.
Task 2: Create a virtual switch and a VMkernel port group for vMotion migration
In this task, you will create a virtual switch with a VMkernel port that will be used in vMotion migrations. Students should do the steps in this task individually.
1. Select Home > vCenter > Hosts and Clusters. 2. In the vCenter Web Client inventory, expand vcva > Training. 3. Select your ESXi host in the inventory, and in the right pane click Manage. 4. Click Networking. 5. Click the icon Add Host Networking. 6. When prompted by the Add Network wizard, perform the following actions.
Field/Setting Connection Type Select target device Create a Standard Switch
Action Select VMkernel Network Adapter. Click Next. Select New standard switch. Click Next. Click the + sign and add the adapter that you recorded in Preparing for the lab. Click OK then click Next.
61
Field/Setting Port Properties
Action Type vMotion for the Network Label. Select the vMotion traffic check box under Available Services. Click Next.
IP Address
Select Use static IPv4 settings. Enter the vMotion IP address that you recorded in Preparing for the lab.
Subnet Mask Summary
Enter the vMotion subnet mask that you recorded in Preparing for the lab. Click Next. Confirm the settings and click Finish.
7. Verify the configuration information for the new virtual switch in the Networking panel.
Task 3: Verify that your ESXi host meets vMotion requirements

In this task, you will verify that your ESXi host meets vMotion requirements. Students should do the steps in this task individually.
1. Select Home > Hosts and Clusters. 2. Select each ESXi host and click its Summary tab. 3. View the Processor Type information to verify that the CPUs are compatible. 4. Click your ESXi hosts Manage tab. 5. Verify that a vMotion port group exists and that it is configured with a speed and duplex of
1000Mb, Full Duplex:

a. Click the Networking button. b. Verify that a vMotion port group exists. It should be a VMkernel port. c. Verify that the speed and duplex are set to 1000 full. 6. Verify that both ESXi hosts have access to the same shared datastores: a. Select Home > vCenter > Storage. b. In the vCenter Web Client inventory, expand vcva > Training. c. Select the shared datastore you recorded in Preparing for the lab. d. In the right pane, click Manage. 62 Lab 11 Migrating Virtual Machines
e. On the Manage tab, click Settings. f. Click Connectivity and Multipathing. g. Verify that both hosts are displayed in the table.
11
Task 4: Verify that your virtual machines meet vMotion requirements

In this task, you will verify that a virtual machines settings meet vMotion requirements. Perform this task for all of your named virtual machines. Students should do the steps in this task individually.
1. Select Home > vCenter > VMs and Templates. 2. In the right pane, click Summary. 3. In your LabVMs folder, click the <your_name>##-2 virtual machine 4. In the VM Hardware pane, click Edit Settings. 5. Verify that the virtual machine's CD/DVD Drive 1 is not connected to a local device and does
not have an image in a local datastore defined:

a. In the Hardware list, verify that the Summary column for CD/DVD Drive 1 shows Client
Device.
b. If the Summary column does not show Client Device, select CD/DVD Drive 1 in the list
and click Client Device to remove existing connections.

6. In the Hardware list, find Network Adapter 1. Verify that the virtual machine is either
disconnected from the network or connected to a network accessible by the destination ESXi host (your partners ESXi host).
7. Check the Hardware list for a hard disk that is labeled Hard Disk 2. a. If you have such a disk, point to the disk. b. After a moment, click the x button that appears at the right side of the row for Hard Disk 2. c. Mark the Delete files from datastore check box.
NOTE
This RDM hard disk was added in a previous lab and must be removed so that the virtual machine will be compatible with vMotion.
8. Verify that CPU affinity is not set: a. Click the arrow next to CPU to expand the advanced CPU options. b. If the Scheduling Affinity field displays a number, delete the number. 9. Click OK to apply all virtual machine changes. Lab 11 Migrating Virtual Machines 63
Task 5: Perform a vMotion migration of a virtual machine on a shared datastore

In this task, you will migrate a virtual machine while it is powered on. Students should do the steps in this task individually.
1. Select Home > Hosts and Clusters. 2. Expand the vCenter Server inventory view by clicking on the arrow next to your ESXi host so
that you can see all of your virtual machines.

3. Migrate <your_name>##-2 to your partners ESXi host: a. Click the virtual machine named <your_name>##-2 and click Actions > Migrate.
NOTE
If <your_name>##-2 is powered off, power it on before beginning the vMotion migration.

b. When prompted by the Migrate Virtual Machine wizard, perform the following actions.
Field/Setting Select Migration Type Select Destination
Action Select Change host. Expand the inventory view and select the ESXi host to migrate virtual machines to, which you recorded in Preparing for the lab. The migration requirements are validated. If the validation does not succeed, you receive warning or error messages. You will not be able to continue with the migration until the errors are resolved.
TIP
One reason that the validation might not succeed is if a raw device mapping resides in a private LUN. See task 6, step 5. vMotion Priority Ready to Complete Leave the default value. Click Finish.
4. In the Recent Tasks pane, monitor the progress of the virtual machine migration. 5. Verify that your virtual machine is displayed under your partners ESXi host in the inventory. 6. Use vMotion and verify that your other virtual machines can be migrated successfully to your
partners ESXi host.

7. Migrate <your_name>##-2 to back to your ESXi host 64 Lab 11 Migrating Virtual Machines
Task 6: Perform a vMotion migration to a private datastore

In this task, you will migrate a virtual machine while it is powered on to a private datastore on your partners ESXi host. Students should do the steps in this task individually.
1. Select Home > Hosts and Clusters. 2. Expand the vCenter Server inventory view by clicking on the arrow next to your ESXi host so
11
that you can see all of your virtual machines.

3. Migrate <your_name>##-2 to your partners ESXi host: a. Click the virtual machine named <your_name>##-2 and click Actions > Migrate.
NOTE
If <your_name>##-2 is powered off, power it on before beginning the vMotion migration.

b. When prompted by the Migrate Virtual Machine wizard, perform the following actions.
Field/Setting Select Migration Type Select Destination
Action Select Change both host and datastore Expand the inventory view and select the ESXi host to migrate virtual machines to, which you recorded in Preparing for the lab. Select the private datastore that you recorded in Preparing for the lab. Leave the default value. Click Finish.
Select Datastore vMotion Priority Ready to Complete
4. In the Recent Tasks pane, monitor the progress of the virtual machine migration. 5. Verify that your virtual machine is displayed under your partners ESXi host in the inventory.
65
Task 7: Prepare for the next lab

In this task, you will migrate all of your virtual machines back to your host. Students should do the steps in this task individually.
1. Select Home > Hosts and Clusters. 2. Expand the vCenter Server inventory view so that you can see all of your virtual machines. 3. Migrate each of your virtual machines back to your ESXi host: a. If any of your virtual machines are powered off, power it on before performing the
vMotion migration.
b. Click your virtual machine and click Actions > Migrate. c. When prompted by the Migrate Virtual Machine wizard, perform the following actions.
Field/Setting Select Migration Type Select Destination Datastore vMotion Priority Ready to Complete
Action Select Change host. or Change host and datastore for the virtual machine you migrated to private storage Expand the inventory view and select your ESXi host. The Shared datastore you recorded in Preparing for the lab. Leave the default value. Click Finish.
4. In the Recent Tasks pane, monitor the progress of the virtual machine migration. 5. Verify that your virtual machines are displayed under your ESXi host in the inventory. 6. Close the vSphere Web Client.
66
12
Lab 12
Managing Virtual Machines

Objective: Perform several virtual machine management tasks
1. Unregister a virtual machine in the vCenter Server inventory. 2. Register a virtual machine in the vCenter Server inventory. 3. Unregister and delete virtual machines from disk. 4. Take snapshots of a virtual machine. 5. Revert to a snapshot. 6. Delete an individual snapshot. 7. Use the Delete All function in Snapshot Manager.

Record the following information: VMware vCenter Server system name vCenter Server root password Virtual machine Administrator password Software ISO image location
Lab 12 Managing Virtual Machines
67
Task 1: Unregister a virtual machine in the vCenter Server inventory

In this task, you will unregister a virtual machine from the vCenter Server inventory. You will verify that the virtual machine files still exists on the VMware vSphere VMFS datastore. Students should do the steps in this task individually.
1. If the VMware vSphere Client is not already active, use it to log in to your team vCenter
Server system. To log in, use the user name root and the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > VMs and Templates. 3. Click <your_name>##-4 (where ## is the number of your VMware vSphere ESXi host) and
click the Summary tab.

4. From the Storage column in the Resources panel, record the VMFS datastore name where the
virtual machine resides:____________________________________________

5. Right-click <your_name>##-4 and select Power > Shut Down Guest. 6. After the virtual machine has shut down, right-click <your_name>##-4 and select Remove
from Inventory.
CAUTION
Do not select Delete from Disk. That operation is not recoverable.

7. Click Yes to confirm the removal and verify that <your_name>##-4 is no longer displayed in
the inventory.
8. Select Home > Inventory > Datastores and Datastore Clusters. 9. Right-click the VMFS datastore on which <your_name>##-4 is located (the name that you
recorded in step 4) and select Browse Datastore.

10. In the Datastore Browser, on the Folders tab, does a folder named <your_name>##-4
exist?________.
ANSWER: No, renaming a virtual machine does not rename the virtual machines folder to be renamed.
11. Click the <your_name>##-4 folder to view the virtual machine files.
The files in this folder were used by the virtual machine named <your_name>##-4 because you renamed Hot-Clone## in lab 10, task 3. The rename operation did not rename the original set of files created when you created Hot-Clone##. Leave the Datastore Browser open for the next task.
68
Task 2: Register a virtual machine in the vCenter Server inventory

In this task, you will register a virtual machine using a set of virtual machine files located on a datastore. You will verify that the virtual machine is displayed in the inventory. Students should do the steps in this task individually.
12
1. In the list of files to the right of Folders pane, right-click the Hot-Clone##.vmx file and select
Add to Inventory.
2. When prompted by the Add to Inventory wizard, perform the following actions.
Field/Setting Name & Location
Action Type <your_name>##-5, where ## is the number of your ESXi host. In the Inventory Location pane, select your LabVMs folder. Click Next
Host/Cluster Ready to Complete
Select your ESXi host. Click Next. Click Finish.
3. Close the Datastore Browser window. 4. Verify that the virtual machine is placed back in the inventory: a. Select Home > Inventory > VMs and Templates. b. Verify that <your_name>##-5 is in your LabVMs folder.
Task 3: Unregister and delete virtual machines from disk

In this task, you will delete the <your_name>##-5 virtual machine in your LabVMs folder. You will verify that it was permanently deleted from the VMFS datastore. Students should do the steps in this task individually.
1. Select the <your_name>##-5 virtual machine in the inventory and click the Summary tab.
Record the VMFS datastore name on which this virtual machine resides: ____________________________
2. Right-click <your_name>##-5 and select Delete from Disk. 3. Click Yes to confirm the deletion and verify that <your_name>##-5 is no longer displayed in
the inventory.
4. Select Home > Inventory > Datastores and Datastore Clusters. Lab 12 Managing Virtual Machines 69
5. Right-click the VMFS datastore on which <your_name>##-5 was located and select Browse
Datastore.
6. Verify that the virtual machine files no longer exist. The folder would have been named with the
original virtual machine name: Hot-Clone##.

7. Close the Datastore Browser.
Task 4: Take snapshots of a virtual machine

In this task, you will create a snapshot tree of a virtual machine. Students should do the steps in this task individually.
1. Select Home > Inventory > VMs and Templates. 2. Open your LabVMs folder, right-click the virtual machine <your_name>##-3, and select Open
Console.
3. Log in as user Administrator, with the virtual machine Administrator password that you

4. Drag the iometer.exe file to the Recycle Bin. To remove the iometer.exe file, empty the
Recycle Bin (right-click the Recycle Bin icon and select Empty Recycle Bin).
5. Click Yes to confirm the file deletion and leave the virtual machine console open. 6. In your LabVMs folder, right-click the virtual machine <your_name>##-3 and select Snapshot
> Take Snapshot.

7. When prompted by the Take Virtual Machine Snapshot wizard, perform the following actions.
Field/Setting Name Description Snapshot the virtual machines memory Quiesce guest file system (Needs VMware Tools installed)
Value Type Without iometer. Type Deleted iometer.exe. Click to deselect. Leave unselected.
8. Click OK and monitor the task in the Recent Tasks pane.
70
9. Drag the cpubusy.vbs file to the Recycle Bin. To remove the cpubusy.vbs file, empty the
Recycle Bin (right-click the Recycle Bin icon and select Empty Recycle Bin).
10. Click Yes to confirm the file deletion and leave the virtual machine console open. 11. Return to the virtual machine console window and take another snapshot of this virtual machine
by clicking the Snapshot icon.
12
Action Type Without iometer and cpubusy. Type Deleted cpubusy.vbs. Click to deselect. Leave unselected.
13. Click OK and monitor the task in the Recent Tasks pane. 14. If ClassFiles-vSphere.iso is not already connected, connect ClassFiles-vSphere.iso
to your virtual machines CD-ROM drive:

a. In the icon bar of the virtual machine console window, click the Connect/disconnect the
CD/DVD devices of the virtual machine icon (the right-most active icon).
b. Select CD/DVD Drive 1 > Connect to ISO image on a datastore. c. Navigate to the software ISO location that you recorded in Preparing for the lab. d. Select the ISO image Classfiles-vSphere.iso and click OK. 15. View your virtual machine console. If autorun does not open the CD-ROM, use Windows
Explorer and go to the CD-ROM drive (D:).

16. Copy the cpubusy.vbs file from the CD-ROM drive (D:) to the virtual machines desktop.
71
17. Disconnect from the Classfiles-vSphere.iso on the CD-ROM drive: a. Right-click the virtual machine in the inventory and select Edit Settings. b. In the Hardware list, select CD/DVD Drive 1. c. Select Client Device and click OK. 18. Return to the virtual machine console window and take another snapshot of this virtual machine
by clicking the Snapshot icon.
Action Type With cpubusy. Type Added cpubusy.vbs. Leave selected. Leave unselected.
20. Click OK and monitor the task in the Recent Tasks pane. 21. Click the Snapshot Manager icon in the virtual machine console.
You should see three snapshots. Leave the Snapshot Manager open.
72
Task 5: Revert to a snapshot

In this task, you revert a virtual machine to an earlier snapshot. Students should do the steps in this task individually.
1. In the Snapshot Manager, select the snapshot named Without Iometer and Cpubusy and click
12
Go to.
2. Click Yes to confirm that you want to revert to Without Iometer and Cpubusy. 3. Click Close to close the Snapshot Manager. 4. Did the virtual machine power off?___________
Why?_____________________________________________________________________
ANSWER: Yes. Because the memory state was not preserved.
5. Start your virtual machine by clicking the green arrow in the virtual machine console window. 6. Log in to your virtual machine as user Administrator. Use the virtual machine Administrator

7. Click the Snapshot Manager icon in the virtual machine console. You should see that the You
Are Here pointer has been placed below the snapshot named Without Iometer and Cpubusy.
8. Click Close to close the Snapshot Manager. 9. Do you see either iometer.exe or cpubusy.vbs on the desktop?___________________
ANSWER: No.
10. Click the Snapshot Manager icon in the virtual machine console. 11. In the Snapshot Manager, select the snapshot named With Cpubusy and click Go to. 12. Click Yes to confirm that you want to revert to With Cpubusy. 13. Click Close to close the Snapshot Manager. 14. Did the virtual machine power off?__________________________________________
ANSWER: No. Because the memory state was preserved.
15. Do you see cpubusy.vbs on the desktop?___________________

ANSWER: Yes.
16. Do you see iometer.exe on the desktop?___________________

ANSWER: No.
73
Task 6: Delete an individual snapshot

In this task, you will delete an individual snapshot. Students should do the steps in this task individually.
Are Here pointer has been placed below the snapshot named With Cpubusy.
2. In the Snapshot Manager, click the snapshot named Without Iometer and Cpubusy and click
Delete.
3. Click Yes to confirm that you want to delete Without Iometer and Cpubusy. 4. Click Close to close the Snapshot Manager. 5. Did the virtual machine power off?__________________________________________
ANSWER: No.
6. Do you see cpubusy.vbs on the desktop?___________________

ANSWER: Yes.
Task 7: Use the Delete All function in Snapshot Manager

In this task, you will delete all remaining snapshots and record the effect of this operation. Students should do the steps in this task individually.
Are Here pointer has been placed below the snapshot named With Cpubusy.
2. In the Snapshot Manager, select the last snapshot in the list and click the Delete All button. 3. Click Yes to confirm that you want to delete all remaining snapshots. 4. Were all the remaining snapshots deleted from the Snapshot Manager?_______________.
ANSWER: Yes.
5. Click Close to closed the Snapshot Manager. 6. Do you see cpubusy.vbs on the desktop?_____.
Why?______________________________________________________________________.
ANSWER: Yes. Because all writes in the remaining snapshots were committed to the base disk.
7. Close the virtual machine console.
74
Lab 13
Managing vApps
Objective: Perform vApp management tasks
1. Create a vApp. 2. Power on a vApp. 3. Remove a vApp.
13

Record the following information: VMware vCenter Server system name vCenter Server Administrator password Virtual machine Administrator password Software ISO image location
Lab 13 Managing vApps
75
Task 1: Create a vApp

In this task, you will create a vSphere vApp that contains multiple virtual machines and define a boot order sequence. Students should do the steps in this task individually.
1. Select Home > Inventory > VMs and Templates. 2. Right-click <your_name>##-2 and select Power > Shut Down Guest. Click Yes to confirm the
shutdown.
3. Repeat step 2 to shut down <your_name>##-3. Wait until both virtual machines have been
powered off.
4. Right-click LabVMs and select New vApp. 5. When prompted by the New vApp wizard, perform the following actions.
Field/Setting vApp Name Destination for vApp Resource allocation Ready to Complete
Action Type <your_name>-vApp. Click Next. Select your ESXi host. Click Next. Leave the defaults. Click Next. Click Finish.
6. Verify that the vApp appears in the inventory. 7. Drag the virtual machine named <your_name>##-2 to your vApp. 8. Drag the virtual machine named <your_name>##-3 to your vApp. 9. Do you see <your_name>##-2 or <your_name>##-3 on the left side of the vSphere Client in the
VMs and Templates view? ________________

ANSWER: No. You see the vApp but not the virtual machines themselves.
76
Lab 13
Managing vApps
10. Select your vApp and click the Virtual Machines tab. Do you see <your_name>##-2 or
<your_name>##-3? ________________
ANSWER: Yes. In the VMs and Templates view, the virtual machines in a vApp are visible on the Virtual Machines tab.
11. Select Home > Inventory > Hosts and Clusters. 12. Expand your vApp. Do you see <your_name>##-2 or <your_name>##-3 on the left side of the
vSphere Client in the Hosts and Clusters view? ________________

ANSWER: Yes. You can see the vApp and the virtual machines that the vApp contains.
13
13. Select Home > Inventory > VMs and Templates. 14. Right-click your vApp and select Edit Settings. 15. Click the Start Order tab. 16. Select <your_name>##-2 and click the down arrow twice. <your_name>##-2 is placed in
group 2.
17. Verify that <your_name>##-3 is displayed first, in group 1. 18. Select <your_name>##-3 and change the value in the Startup sequence proceeds when field
from 120 to 20 (seconds).

19. Select <your_name>##-2 and change the value in the Startup sequence proceeds when field
from 120 to 20 (seconds).

20. Click OK.
Task 2: Power on a vApp

In this task, you will power on the vApp that you created.
1. Right-click your vApp and select Power On. 2. Monitor the tasks in the Recent Tasks pane. What did you observe? ________________
ANSWER: The startup pauses at 20 percent and moves to 40 percent when the second virtual machine begins to start up.
Lab 13 Managing vApps
77
Task 3: Remove a vApp

In this task, you will remove the vApp that you created.
1. Right-click your vApp and select Shut Down. Click Yes to confirm the shutdown. 2. Select Home > Inventory > Hosts and Clusters. 3. Expand your vApp. Drag <your_name>##-2 from your vApp to your host. 4. Repeat step 3 for <your_name>##-3. 5. Right-click your vApp and select Delete from Disk. 6. Click Yes to confirm the deletion. 7. Minimize, and leave the vSphere Client open for the next lab. 8. Using the VMware vSphere Web Client, reboot the vCenter Server Appliance. a. On the desktop of your Desktop system, double-click Google Chrome. b. In the Google Chrome browser, navigate to the URL https://
<VCVA_appliance_name>:5480.
c. Log in to your vCenter Server Appliance with the user name and password that you

d. At the top of the Google Chrome browser, click the System tab. e. Click Reboot. f. On the System Reboot confirmation, click Reboot.
NOTE
The appliance takes several minutes to reboot. The System Reboot dialog disappears after the reboot is near completion. This reboot is required to address the issue of time shift within a nested vSphere lab environment. This reboot is not required for any portion of vApp configuration within VMware vSphere.
Assuming that the student has followed directions correctly: The virtual machine named <your_name>##-1 has been deleted. The virtual machine named <your_name>##-2 has one virtual disk. Hard disk 1 is thin-provisioned and is a traditional-style (-flat.vmdk) virtual disk. The virtual machine named <your_name>##-3 has a thick eager-zeroed virtual disk. The virtual machine named <your_name>##-4 (formerly named Hot-Clone##) has been deleted. When students unregistered this virtual machine and then registered it, they were told to rename the virtual machine <your_name>##-5. The virtual machine named <your_name>##-5 (formerly named <your_name>##-4 and Hot-Clone##) has been deleted.
78
Lab 13
Managing vApps
Lab 14
Access Control
Objective: Manage user access permissions
1. Try to log in directly to the ESXi host. 2. Grant nonadministrator access to a user. 3. Explore the ESX Admins AD group.
:
14

Record the following information: Your VMware vSphere ESXi host name Your domain user name (nonprivileged account) Your domain user password Your domain administrator name Your domain administrator password
Lab 14 Access Control
79
Task 1: Try to log in directly to the ESXi host

In this task, you will explore two scenarios that prevent a user from logging in directly to the ESXi host. Students should do the steps in this task individually.
1. Use the VMware vSphere Client to log in directly to your ESXi host. Use your
nonprivileged domain user name, which you recorded in Preparing for the lab. Type the incorrect password. Was the login successful?__________
ANSWER: No.
What error message did you receive, if any? ____________________________________

ANSWER: Cannot complete due to an incorrect user name or password
Why did the login fail?_____________________________________________________

ANSWER: The login failed because authentication failed (wrong password).
2. Use the vSphere Client to log in directly to your ESXi host with your nonprivileged domain
user name and password, which you recorded in Preparing for the lab. Type the correct password. Was the login successful?__________
ANSWER: No.
What error message did you receive, if any? ____________________________________

ANSWER: The vSphere Client could not connect to <host>. You do not have permission to log in to the server: <host>.
Why did the login fail?_____________________________________________________

ANSWER: The authentication succeeded (the user typed the correct user name and password) and the users identity was established. But the user is not a member of the ESX Admins AD group. And no rule has been created in vCenter Server to grant privileges to the user.
In this task, you were unable to log in with your nonprivileged domain user account whether or not you typed an incorrect or correct password. This behavior is expected. You will provide the correct access to this account so that the user can successfully log in.
80
Task 2: Grant nonadministrator access to a user

In this task, you will grant a user read-only access.
1. Use the vSphere Client to log directly in to your ESXi host. Use your domain administrator
name and password, which you recorded in Preparing for the lab. When prompted that your ESXi host is being managed by a VMware vCenter Server instance, click OK.
2. Right-click your ESXi host. 3. Select Add Permission. 4. In the Assign Permissions wizard, click Add. 5. Set the domain to the AD domain that you recorded in Preparing for the lab. 6. Search for your nonprivileged domain user name, which you recorded in Preparing for the
lab. Select that user and click Add. Click OK.

7. In the Assigned Role pane, select Read-only.
TIP
14
If you wanted to grant a user administrator access, you could assign the Administrator role. In task 3 you will learn another way to grant administrator access.
8. Verify that the Propagate to Child Objects check box is selected. 9. Click OK. 10. Exit the vSphere Client (File > Exit). 11. Use the vSphere Client to log in directly to your ESXi host. Use your nonprivileged domain
user name and password, which you recorded in Preparing for the lab. Type the correct password. Was the login successful?__________
ANSWER: Yes.
Can this user change the power state of a virtual machine?__________

ANSWER: No.
Why or why not?__________

ANSWER: The user cannot change the power state of virtual machines because the user was granted only read-only access.
12. Exit the vSphere Client (File > Exit).
81
Task 3: Explore the ESX Admins AD group

1. Use the vSphere Client to log in to your ESXi host. Use your domain administrator user name
and password, which you recorded in Preparing for the lab. Was the login successful?__________ Why or why not?__________________________________________________________
ANSWER: Yes, the login was successful because your domain administrator account is a member of the ESX Admins AD group.
2. Select Home > Administration > Roles. 3. In the Roles column, click Administrator.
What users and groups are assigned the Administrator role?

ANSWER: Users root, dcui, and vpxuser are assigned the Administrator role. The group ESX Admins (shown as <domain name>\esx^admins) is also assigned the Administrator role. Users who are members of the ESX Admins group can log in to the ESXi host with vSphere Client. TIP
Instead of assigning administrator role to individual accounts in the vSphere Client, you can add all of those users to the ESX Admins AD group.
4. Log out of the vSphere Client (File > Exit).
82
Lab 15
User Permissions
Objective: Use a custom user role
15
1. Create a custom role in vCenter Server. 2. Assign permissions on vCenter Server inventory objects. 3. Verify permission usability.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password Active Directory domain Your domain user name (nonprivileged account) Datastore for domain users
Lab 15 User Permissions
83
Task 1: Create a custom role in vCenter Server

In this task, you will create a custom user role. Students should do the steps in this task individually.
1. Use the VMware vSphere Client to log in to your team vCenter Server system as user root,
with the password that you recorded in Preparing for the lab.
2. Select Home > Administration > Roles. 3. Click Add Role. The Add New Role dialog box is displayed. 4. In Name, type VM Creator - <your_name>. 5. In the Privileges pane, select the following privileges.
Privilege category Datastore Network Resource Virtual machine > Configuration
Privilege name Allocate space Assign network Assign virtual machine to resource pool Add new disk Add or remove device Memory
Virtual machine > Interaction Virtual machine > Inventory
All privileges. Select Interaction to include all privileges in this subcategory. Create new
6. Click OK to add the role.
Task 2: Assign permissions on vCenter Server inventory objects

In this task, you will assign the VM Creator role (which you created in task 1) to a nonprivileged user account. This role grants a user the ability to create virtual machines. Students should do the steps in this task individually.
1. Select Home > Inventory > VMs and Templates. 2. Select your LabVMs folder. 3. Click the Permissions tab.
84
Lab 15
User Permissions
4. In the Permissions tab, right-click in the white space under the list of permissions. Select Add
Permission. The Assign Permissions dialog box is displayed.

5. Click Add. 6. From the drop-down menu in the Domain panel, select the AD domain that you recorded in

7. In the search field of the Users and Group panel, enter the user name of the nonprivileged
domain account that you recorded in Preparing for the lab. Do not include the AD domain in the entry. Click Search.
8. When the search completes, select the nonprivileged domain user name in the Users and
Groups panel and click Add.

9. Click OK to continue. 10. In the Assigned Role panel, click the VM Creator - <your_name> role. 11. Leave the Propagate to Child Objects check box selected and click OK. Verify that the
permission appears in the Permissions tab.

TIP
15
Notice that you assigned your custom role to a specific folder. In the steps that follow, you will assign the custom role to a specific host, datastore, and network. As a result, the user can create virtual machines, but only in the specified folder, host, datastore, and network. On the other hand, you can assign the role on an object higher in the vCenter Server inventory, such as the vCenter Server object itself. In this case, the user would be able to create virtual machines in any folder, host, datastore, and network.
12. Select Home > Inventory > Hosts and Clusters. 13. Select your VMware vSphere ESXi host in the inventory and click the Permissions tab. 14. Add the permission (as in steps 411). 15. Select Home > Inventory > Datastores and Datastore Clusters. 16. Select the datastore for domain users that you recorded in Preparing for the lab and click the
Permissions tab.
17. Add the permission (as in steps 411). 18. Select Home > Inventory > Networking. 19. Select the Production network and click the Permissions tab. 20. Add the permission (as in steps 411).
85
Task 3: Verify permission usability

In this task, you will verify that the nonprivileged domain user account can create a virtual machine on the objects on which you defined the permission. Students should do the steps in this task individually.
1. In the lower right corner of the vSphere Client, notice that you are logged in as root. 2. Minimize this instance of the vSphere Client. 3. Start another instance of the vSphere Client. In this instance, log in to your vCenter Server
system with the nonprivileged domain user name and password that you recorded in Preparing for the lab.
4. In the lower right corner of the vSphere Client, notice that you are logged in as the
nonprivileged domain user.

5. Select Home > Inventory > VMs and Templates. LabVMs is the only folder that you see. 6. Right-click your LabVMs folder and select New Virtual Machine. 7. When prompted by the Create New Virtual Machine wizard, perform the following actions.
Field/Setting Virtual Machine Configuration Name Inventory Location Host/Cluster Datastore
Action Select Custom. Type <your_name>-Temp, where <your_name> is your first name (for example, Brian-Temp). Your LabVMs folder is selected for you. Click Next. Select your ESXi host. Only your ESXi host is listed. Click Next. Select the datastore for domain users that you recorded in Preparing for the lab. The other datastores are not displayed in the list. Click Next. Leave the default. Click Next. Leave the defaults. Click Next. Leave the defaults. Click Next. Select MB from the drop-down menu and type 4. Click Next.
Virtual Machine Version Guest Operating System CPUs Memory
86
Field/Setting Network
Action Verify that Production is the only option on the dropdown menu for NIC 1. Leave all other options at their default settings. Click Next. Leave the default. Click Next. Notice the options that are not available to you. Leave the default. Click Next. In Capacity, type 2 and leave the default at GB. Select Thin Provision. Leave the default setting for Location and click Next.
SCSI Controller Select a Disk Disk Size
Advanced Options Ready to Complete
Leave the defaults and Click Next. Click Finish.
15
8. Monitor the progress of the task in the Recent Tasks pane.
As you proceeded through the wizard, did you notice that only those inventory objects on which you assigned permissions were available for the user to select?__________
ANSWER: Yes. Students should see that only the LabVMs folder, their ESXi host, their datastore, and the ProdVMs network were available.
9. After the task is completed, verify that the virtual machine was created successfully. 10. Right-click your virtual machine in the inventory. Familiarize yourself with the options that the
role does not permit. For example, the Delete from Disk option is unavailable.
11. Exit the instance of the vSphere Client where you are logged in as the domain user. 12. Display the vSphere Client instance where you are logged in as Administrator. 13. Select Home > Inventory > Hosts and Clusters. 14. Right-click the virtual machine <your_name>-Temp and select Delete from Disk. Click Yes to
confirm deletion.
15. Exit the vSphere Client.
Task 5, step 6: If you are teaching the class in the VDC, you might encounter latency as user and group information is retrieved from AD. Be prepared to tell your students to be patient. AD response time improves with subsequent queries.
87
88
Lab 15
User Permissions
Lab 16
Resource Pools
Objective: Create and use resource pools on an ESXi host
1. Create CPU contention. 2. Create a resource pool named Fin-Test.
16
3. Create a resource pool named Fin-Prod. 4. Verify resource pool functionality.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password
Lab 16 Resource Pools
89
Task 1: Create CPU contention

In this task, you will run the cpubusy.vbs script in each virtual machine to create a heavy CPU load, resulting in contention for CPU cycles. Students should do the steps in this task individually.
1. If the VMware vSphere Client is not already active, use it to log in to your team
vCenter Server system. Log in as user root, with the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > VMs and Templates. 3. Open a console to virtual machines <your_name>##-2 and <your_name>##-3 and log in as
Administrator.
4. In each virtual machine, start an instance of the cpubusy.vbs script (on the virtual machines
desktop) by right-clicking the script and selecting Open with Command Prompt. This script runs continuously. Wait one to two minutes for it to stabilize. This script repeatedly does floating-point computations. The script also displays the duration (wall-clock time) of a computation. Example:
I did three million sines in 2 seconds!
Use the number of seconds reported as a performance estimate. You should find that the program runs at approximately the same rate in each virtual machine.
5. In the inventory view, right-click the <your_name>##-2 virtual machine and select Edit
Settings.
6. In the virtual machine Properties dialog box, click the Resources tab. 7. Click Advanced CPU. 8. In the Scheduling Affinity pane, type 1 in the space provided. The virtual machine will run
only on processor 1. Click OK.

CAUTION
CPU affinity is used mainly to create CPU contention for training purposes. Use of this feature in a production environment is strongly discouraged.
9. Repeat steps 58 to set the scheduling affinity for the other virtual machine, <your_name>##-3.
Force the virtual machine to use the same processor as the first virtual machine (processor 1). Allow cpubusy.vbs to run for a minute or two. Use the number of seconds reported as a performance estimate. You should find that the program runs at approximately the same rate in each virtual machine.
90
Task 2: Create a resource pool named Fin-Test

In this task, you will create a resource pool named Fin-Test. Students should do the steps in this task individually.
1. Select Home > Inventory > Hosts and Clusters. 2. Right-click your VMware vSphere ESXi host and select New Resource Pool. 3. Perform the following actions to assign properties to the resource pool.
Resource pool property Name CPU Resource Shares All other settings
Action Type Fin-Test. Select Low from the drop-down menu. Leave the defaults.
4. Click OK.
Task 3: Create a resource pool named Fin-Prod

In this task, you will create a resource pool named Fin-Prod. Students should do the steps in this task individually.
1. Select Home > Inventory > Hosts and Clusters. 2. Right-click your ESXi host in the inventory and select New Resource Pool. 3. Perform the following actions to assign properties to the resource pool.
16
Resource pool property Name CPU Resource Shares All other settings
Action Type Fin-Prod. Select High from the drop-down menu. Leave the default.
4. Click OK.
91
Task 4: Verify resource pool functionality

In this task, you will verify that each resource pool provides the correct amount of CPU to each virtual machine when CPU contention occurs. Students should do the steps in this task individually.
1. Select Fin-Test in the inventory and click the Summary tab. View the CPU Resource Settings
panel. Record the number of shares for this resource pool: __________________
ANSWER: 2,000
2. Select Fin-Prod and click the Summary tab. View the Resource Settings panel. Record the
number of shares for this resource pool: __________________

ANSWER: 8,000
3. Drag <your_name>##-2 to the Fin-Prod resource pool. 4. Drag <your_name>##-3 to the Fin-Test resource pool. 5. View the results of cpubusy.vbs in each virtual machine console.
Is there a difference in performance between virtual machines? Why or why not?

ANSWER: Yes. The Fin-Test resource pool (and thus the virtual machine in it) has only one-fourth of the CPU shares that the Fin-Prod resource pool has. So the virtual machine in the Fin-Test resource pool will receive only one-fourth of the CPU cycles of the logical CPU to which the virtual machines are pinned. Note: In the past, bugs have required that the virtual machines be powered off before being dragged to the resource pool.
6. Change CPU shares of the Fin-Test resource pool from Low to Normal. Right-click the Fin-
Test resource pool in the inventory and click Edit Settings.

7. Click Normal from the drop-down menu for CPU shares. Leave CPU shares at High for the
Fin-Prod resource pool.

8. Run the scripts for a few seconds and compare the performance of the script in each virtual
machine. If CPU contention occurs, you should notice a difference in performance between the virtual machines.
9. Using the process from steps 6 and 7, change CPU shares of the Fin-Prod resource pool from
High to Normal.
10. Stop the cpubusy.vbs scripts in each virtual machine. Press Ctrl+C in each cpubusy window. 11. Minimize the virtual machine consoles. You will use them in the next lab.
92
Lab 17
Monitoring Virtual Machine Performance :

Objective: See how CPU workload is reflected by system monitoring tools
1. Create CPU activity. 2. Use vSphere Web Client to monitor CPU utilization. 3. Undo changes made to your virtual machines.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password VMware vSphere Web Client URL
17
Lab 17 Monitoring Virtual Machine Performance
93
Task 1: Create CPU activity

NOTE
For this lab, you use the vSphere Web Client. All operations performed are the same whether using the VMware vSphere Client or the vSphere Web Client unless otherwise noted. In this task, you will run the cpubusy.vbs script in each virtual machine to create a heavy CPU load. Students should do the steps in this task individually.
1. Use a web browser to connect to the vSphere Web Client URL that you recorded in Preparing
for the lab. If you receive a certificate error, select to continue to the web site. Log in as user root with the team vCenter Server root password that you recorded in Preparing for the lab.
NOTE
Upon connecting to vCenter Server using the vSphere Web Client, you might receive an error indicating that there are vCenter Server instances with expiring licenses in your inventory. Close this message.
2. In the left navigation pane, select vCenter > VMs and Templates. Expand the view under your
vCenter Server to show your virtual machines.

NOTE
If you are using the vSphere Client, select Home > Inventory > VMs and Templates.
3. Maximize the consoles to the virtual machines <your_name>##-2 and <your_name>##-3 and
log in as Administrator. If you receive a certificate error, select to continue to the web site.
4. In each virtual machine, start an instance of the cpubusy.vbs script (on the virtual machines
desktop) by right-clicking the script and selecting Open with Command Prompt.
Task 2: Use vSphere Web Client to monitor CPU utilization

In this task, you will modify and monitor the CPU performance graphs. Students should do the steps in this task individually.
1. Click <your_name>##-2 in the inventory. Select the Monitor tab and click the Performance
tab. The Overview view displays by default.

NOTE
If you are using the vSphere Client, the Overview view will display as an unreachable web site because the web client is not installed.
2. Click the Advanced button. By default, the Advanced panel shows CPU usage in real time. 3. Click the Chart Options link. If necessary, unpin the right-hand column to make the link
visible. The Customize Performance Chart dialog box is displayed.
94
Lab 17
Monitoring Virtual Machine Performance
4. In the Chart Options pane, select CPU > Real-time. 5. In the Objects pane on the right, deselect the check box with the virtual machines name. 6. In the Counters pane, click None to deselect all selected counters. 7. Select the Used and Ready counters.
8. Click OK. The chart is displayed. 9. Open a new tab in your web browser to open a second instance of the vSphere Web Client. You
are not required to re-enter your connection credentials.
17
10. Select <your_name>##-3 in the inventory. Select the Monitor tab and click the Performance
tab.
NOTE
If you are using the vSphere Client, the Overview view will display as an unreachable web site because the web client is not installed.
11. Configure the CPU Performance graph for <your_name>##-3 and select the same chart options
as you did in steps 28.

12. Each web browser window now shows the configured chart for one of your virtual machines. 13. In the web browser window for each virtual machine, point to the end of the line graph to view
the current CPU ready value.
Lab 17 Monitoring Virtual Machine Performance
95
14. Record the current CPU ready value for each virtual machine.
Virtual machine name <your_name>##-2 <your_name>##-3
Latest CPU ready value
Leave the Performance Chart windows open.

15. Stop the cpubusy.vbs scripts in each virtual machine. Press Ctrl+C in each cpubusy window.
CAUTION
Make sure that this script is stopped in each virtual machine. If this script is still running, it will affect the next lab.
16. In the web browser window for each virtual machine, point to the end of the line graph to view
the current CPU ready value.

TIP
Wait for the chart to update. Performance charts update every 20 seconds. Did the Ready value change?_________ Why or why not?_______________________________________________________________
ANSWER: Yes, the Ready value should decrease significantly because the CPU contention that was created by running the cpubusy.vbs script was terminated.
Task 3: Undo changes made to your virtual machines

In this task, you will undo the changes made to each virtual machine. Students should do the steps in this task individually.
1. Close the web browser window for <your_name>##-3. 2. Close the virtual machine consoles. 3. Remove the scheduling affinity value from <your_name>##-2: a. Right-click the <your_name>##-2 virtual machine in the inventory and select Edit Settings. b. Click the Virtual Hardware tab if its not selected. c. Open the pulldown menu next to CPU and delete the value 1 from the field in the
Scheduling Affinity pane.

d. Click OK. 4. Repeat step 3 on <your_name)##-3. Close the vSphere Web Client when finished. 96 Lab 17 Monitoring Virtual Machine Performance
Lab 18
Using Alarms
Objective: Demonstrate the vCenter Server alarm feature
1. Create a virtual machine alarm that monitors for a condition. 2. Create a virtual machine alarm that monitors for an event. 3. Trigger virtual machine alarms and acknowledge them. 4. Disable virtual machine alarms.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password
18
Lab 18 Using Alarms
97
Task 1: Create a virtual machine alarm that monitors for a condition

In this task, will you create a virtual machine alarm that monitors for a specific condition. Students should do the steps in this task individually.
Server system. Log in as user root, with the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters. 3. Select the <your_name>##-2 virtual machine in the inventory and click the Alarms tab. 4. Click Definitions. Notice that the virtual machine inherited alarms defined at the vCenter
Server level.
5. Right-click anywhere to the right of the list of alarms and select New Alarm. The Alarm
Settings dialog box is displayed.

TIP
Because you are creating an alarm for the <your_name>##-2 virtual machine, this alarm will monitor only that virtual machine. If you set the alarm on an object higher in the vCenter Server inventory, the alarm will apply to multiple virtual machines. For example, if you created the alarm on the vCenter Server object itself, the alarm would apply to all virtual machines.
6. In the General tab, perform the following actions.
Field/Setting Alarm name Description Alarm Type Monitor Enable this alarm
Action Type VM CPU Usage - <your_name>. Leave blank. Select Virtual Machine and select Monitor for specific conditions or state, for example, CPU usage, power state. Leave selected.
7. Click the Triggers tab and click Add.
98
Lab 18
Using Alarms
8. Perform the following actions to add a trigger.
Trigger setting Trigger Type Condition Warning Condition Length Alert Condition Length
Action Select VM CPU Usage (%). Select Is above. Double-click the current value and type 25. Select for 30 sec from the drop-down menu. Type 50. Leave the default (5 minutes).
9. Leave Trigger if any of the conditions are satisfied selected. 10. Do not change anything in the Reporting tab. 11. Click the Actions tab. 12. Click Add. 13. Configure the following action settings.
Action setting Action
Action Click Send a notification email below the Action header to activate the drop-down menu and select Suspend VM from the list. Leave as is. (This column does not apply to this action.) Select Once from the list. Change the setting from Once to no value. Leave blank. Leave blank.
Configuration Green to Yellow Yellow to Red Red to Yellow Yellow to Green
18
14. Click OK. 15. Verify that your alarm is in the list of alarms. Your alarm should be at the end of the list. Lab 18 Using Alarms 99
Task 2: Create a virtual machine alarm that monitors for an event

In this task, you will create an alarm that responds to a specific event. Students should do the steps in this task individually.
1. Select the Training datacenter in the inventory and click the Alarms tab. 2. Click Definitions. Right-click anywhere to the right of the list of alarms and select New Alarm.
The Alarm Settings dialog box is displayed.

3. In the General tab, perform the following actions.
Field/Setting Alarm name Description Alarm Type Monitor
Action Type VM Suspended - <your_name>. Leave blank. Select Virtual Machines and select Monitor for specific events occurring on this object, for example, VM powered On. Leave selected.
Enable this alarm
4. Click the Triggers tab. 5. Click Add. 6. Double-click the trigger in the Event column to display a drop-down menu with a list of
triggers. Perform the following actions. Trigger setting Event Status Action Select VM suspended. Keep the default.
7. In the Conditions column, click the Advanced link. The Trigger Conditions dialog box is
displayed.
8. Click Add. 9. In the Argument column, select Change tag and select VM name from the list. 10. In the Operator column, leave equal to selected.
100
Lab 18
Using Alarms
11. Click the area under the Value column. Type <your_name>##-2 as the virtual machine name.
<your_name> is your first name, and ## is the number of your VMware vSphere ESXi host. The virtual machine name is case-sensitive.
12. Click OK. 13. Without making changes in either the Reporting tab or the Actions tab, click OK. Verify that
your alarm is in the list of alarms. Your alarm should be at the end of the list.
Task 3: Trigger virtual machine alarms and acknowledge them

In this task, you will trigger both alarms, view the triggered alarms, and acknowledge each alarm. Students should do the steps in this task individually.
1. Click the <your_name>##-2 virtual machine in the inventory and click the Alarms tab. Click
the Triggered Alarms button. Triggered alarms are displayed in this pane.
2. In the inventory, right-click the <your_name>##-2 virtual machine and select Open Console.
Position the virtual machine console so that you can see both the console and the Triggered Alarms pane at the same time.
3. On the virtual machines desktop, right-click cpubusy.vbs and select Open with Command Prompt. This action starts one instance of cpubusy.vbs. Wait at least 30 seconds before the
alarm is triggered. When the virtual machine is suspended, the alarm has been triggered.
NOTE
Your VM CPU Usage alarm appears only briefly in the Triggered Alarms pane. So you might not see this alarm if you are not viewing the pane at the time the alarm was triggered. But you should see your VM Suspended alarm after the virtual machine is suspended.
4. Monitor the Recent Tasks pane for the Suspend Virtual Machine task. 5. Verify that your VM Suspended alarm is triggered. You should see an entry for this alarm in the
Triggered Alarms pane. The Acknowledged and Acknowledged By fields are blank.
6. Right-click your VM Suspended alarm and select Acknowledge Alarm. The Acknowledged
and Acknowledged By fields are now populated.

7. Power on the suspended virtual machine by right-clicking the virtual machine in the inventory
18
and selecting Power > Power On.

8. In the virtual machine console, press Ctrl+C in the command window to stop cpubusy.vbs. 9. Close the virtual machine console. 10. In the Alarms tab, right-click your VM Suspended alarm and select Clear. In the inventory,
verify that the red alert icon is removed from the virtual machine.
Lab 18 Using Alarms
101
Task 4: Disable virtual machine alarms

In this task, you will disable your VM Suspended alarm and your VM CPU Usage alarm. Students should do the steps in this task individually.
1. Disable your VM CPU Usage alarm: a. Select the <your_name>##-2 virtual machine in the inventory and click the Alarms tab. b. Click Definitions. c. Right-click your VM CPU Usage alarm and select Edit Settings. d. In the General tab, deselect the Enable this alarm check box and click OK. 2. Disable your VM Suspended alarm: a. Select the Training datacenter in the inventory and click the Alarms tab. b. Click Definitions. c. Find your VM Suspended alarm in the list and right-click it. Select Edit Settings. d. In the General tab, deselect the Enable this alarm check box and click OK.
102
Lab 18
Using Alarms
Lab 19
Using vSphere High Availability

Objective: Demonstrate vSphere HA functionality
1. Create a cluster enabled for vSphere HA. 2. Add your ESXi host to a cluster. 3. Test vSphere HA functionality. 4. Determine vSphere HA cluster resource usage. 5. Manage vSphere HA slot size. 6. Configure a vSphere HA cluster with strict admission control. 7. Prepare for upcoming labs.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password VMware vSphere ESXi host to partner with Memory reservation (MB)
19
Lab 19 Using vSphere High Availability
103
Task 1: Create a cluster enabled for vSphere HA

In this task, you will create a cluster enabled for VMware vSphere High Availability. Perform this task as a team. Student A should do the steps in this task.
Server system. Log in as user root, with the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters. 3. In the inventory, right-click the Training datacenter and click New Cluster. 4. When prompted by the New Cluster wizard, perform the following actions.
Field/Setting Name Cluster Features Host Monitoring Status Admission Control Admission Control Policy Cluster Default Settings VM Monitoring Status Default Cluster Settings VMware EVC Virtual Machine Swapfile Location Ready to Complete
Action Type Lab Cluster. Click Turn on vSphere HA and click Next. Leave default selection. Leave default selection. Click Percentage of cluster resources reserved as failover spare capacity and click Next. Leave default selections and click Next. Leave default selection. Leave default selection and click Next. Leave default selection and click Next. Leave default selection and click Next. Click Finish.
5. Monitor the Recent Tasks pane. A cluster is being created.
104
Task 2: Add your ESXi host to a cluster

In this task, you will add your ESXi host to the lab cluster that you created in task 1. Students should do the steps in this task individually.
1. Expand your Lab Servers folder inventory object and select your ESXi host. 2. Drag your ESXi host to the Lab Cluster inventory object. 3. Click Yes when the warning is displayed. The warning alerts you that VMware vSphere
Distributed Resource Scheduler (DRS) is not yet enabled and that your existing resource pools will be collapsed into the cluster root resource pool.
4. Monitor the Recent Tasks pane and wait for the Configuring vSphere HA task to complete. 5. After vSphere HA is enabled, select the Lab Cluster inventory object and click the Summary
tab. The vSphere HA pane is displayed.

6. Click the Cluster Status link. 7. Review the content on each tab and answer the following questions: a. Which host is the master?_______________________________.
ANSWER: The answer depends on which host wins the election.
b. Does the number of protected virtual machines match the number of virtual machines in the
cluster?___________.
ANSWER: The number of virtual machines protected by vSphere HA varies from one team to another. The number depends on how many virtual machines the teams have created and how many of those virtual machines are powered on.
c. How many datastores will be used for heartbeating? ________________.

ANSWER: Both shared datastores are shown in the heartbest because both have live virtual machines.
8. Click OK to close the vSphere HA Cluster Status window. 9. Click the Configuration Issues link and review the errors that are listed.
TIP
The errors indicate that the ESXi hosts in the cluster have no management network redundancy. That is, each ESXi host has a single management network port configured for the cluster. vSphere HA still works if an ESXi host is configured with one management network port, but a second management network port is necessary for redundancy. For this lab, no action is necessary.
10. Click Close.
19
105
Task 3: Test vSphere HA functionality

In this task, will you verify that vSphere HA works properly. Do this task as a team. Student B should do the steps in this task.
1. In the inventory, select the master ESXi host and click the Virtual Machines tab. Write the
name of one or more powered on virtual machines on the master host: ________________________
2. Simulate a host failure by rebooting one of the hosts in the cluster:
CAUTION
Make sure that you reboot the system and that you do not shut down the system.
a. Right-click the master ESXi host that you recorded in task 2, step 7a, and click Reboot. b. When a message warns you that your host is not in maintenance mode, click Yes to reboot. c. Type Testing vSphere HA as the reason for rebooting and click OK. 3. Select Lab Cluster in the inventory and click the Tasks & Events tab. 4. Click Events to display the Events view. 5. From the drop-down menu, select Show Cluster Entries to monitor the events for your
vSphere HA cluster. The cluster entries are sorted by time. Notice the entries that vSphere HA made when the host failure was detected.
NOTE
The initial messages from the hosts might indicate failures. These messages are indicative that the virtual machines on the downed host have failed. It will take 1 to 2 minutes for the virtual machines to successfully migrate to the new host.
106
6. Select the running ESXi host in the cluster and click the Virtual Machines tab. The virtual
machines that were running on the original master ESXi host should now be running on the remaining host in the cluster.
7. Monitor the vCenter Server inventory until you see that the original master ESXi host is
available.
8. Click the Lab Cluster inventory object. 9. Click the Summary tab. 10. Click the Cluster Status link. 11. Compare the answer in task 2, step 7a. Is there a different master host?____________.
ANSWER: Yes. The slave host should have been elected the master host.
12. Click OK to close the cluster status dialog box.
Task 4: Determine vSphere HA cluster resource usage

In this task, you will record the information found on the Resource Allocation tab for Lab Cluster and answer questions based on that information. Do this task as a cluster team. Student B should do the steps in this task.
1. Select Home > Inventory > Hosts and Clusters. 2. Select Lab Cluster in the inventory and click the Resource Allocation tab. Your view should
look like the screenshot.
19
107
3. Record the following information:
CPU total capacity (MHz) for the cluster: ____________________ CPU reserved capacity (MHz) for the cluster: _____________________ CPU available capacity (MHz) for the cluster: ___________________ Determine which virtual machine in the inventory has the highest CPU requirement. Note the number of virtual CPUs (vCPUs) and CPU speed of the virtual machine: ___________________
TIP
One way to determine these values is to view each virtual machines Summary tab. View how many vCPUs the virtual machine has. Then view the Summary tab of the ESXi host on which your virtual machines are located. View the speed of the hosts CPU. The speed of the physical CPU determines the speed of the vCPU. Memory total capacity (MB) for the cluster: ____________________ Memory reserved capacity (MB) for the cluster: _____________________ Memory available capacity (MB) for the cluster: ___________________ Determine which virtual machine has the highest memory requirement. Write the memory size of the virtual machine: ___________________
TIP
One way to determine these values is to view each virtual machines Summary tab to view the memory size of the virtual machine.
4. Based on the CPU numbers, how many virtual machines can this cluster support based on the
available CPU capacity (assuming no overhead)? _________________________

5. Based on the memory numbers, how many virtual machines can this cluster support based on
the available memory capacity (assuming no overhead)? _________________________

6. If these two numbers are different, what must you do to your cluster resources to get to the
higher number?
ANSWER: Increase the amount of the restricting resource and decrease the value of CPU or memory reservation for each virtual machine, if it is set.
108
Task 5: Manage vSphere HA slot size

In this task, you will experiment with ways to control slot allocation in a vSphere High Availability cluster. The number of virtual machines that can be started in a cluster depends on how many slots are available. Do this task as a cluster team. Student A should do the steps in this task.
1. Right-click Lab Cluster in the inventory and select Edit Settings. 2. Select vSphere HA. 3. In the Admission Control Policy pane, ensure that the Host failures the cluster tolerates
policy is selected.
4. Click OK. 5. Select Lab Cluster in the inventory and click the Summary tab. 6. View slot information for this cluster: a. In the vSphere HA panel, click the Advanced Runtime Info link to view the slot
information for this cluster. How much CPU, virtual CPU space, and RAM does your default slot require? ______________________________________________________________
b. Click OK to close the window. 7. Set the CPU reservation on the virtual machine <your_name>##-3: a. Right-click <your_name>##-3 in the inventory and select Edit Settings. b. Click the Resources tab. The CPU setting is selected. c. Set the Reservation field to 512MHz. d. Click OK to commit the change. 8. View slot information for this cluster: a. In the Summary tab of the cluster, click the Advanced Runtime Info link.
Did changing the reservation change the slot size in comparison with the value that you recorded in step 6? __________ How much CPU, virtual CPU space, and RAM does your slot require now? ______________________________________________________________
b. Click OK to close the window.
19
109
9. Use the advanced vSphere HA settings to enforce a slot size: a. Right-click Lab Cluster in the inventory and select Edit Settings. b. Select vSphere HA from the list and click Advanced Options. c. In the Advanced Options (vSphere HA) window, enter the following option-value pair.
Option das.slotCpuInMHz
Value 300
d. Click OK to close the Advanced Options (vSphere HA) window. e. Click OK to commit the changes. 10. View slot information for this cluster: a. In the Summary tab of the cluster, click the Advanced Runtime Info link. Compare the
current value with what you recorded in step 10. How much CPU, virtual CPU space, and RAM does your slot require now? ______________________________________________________________
ANSWER: The Slot size CPU value should now show 300MHz.
b. Click OK to dismiss the window. 11. Remove the advanced vSphere HA setting: a. Right-click Lab Cluster in the inventory and select Edit Settings. b. Select vSphere HA from the list and click Advanced Options. c. Select das.slotCpuInMHz and delete the entry. d. Click OK to close the Advanced Options (vSphere HA) window. e. Click OK to commit your changes. 12. Remove the CPU reservation on <your_name>##-3: a. Right-click <your_name>##-3 in the inventory and select Edit Settings. b. Click the Resources tab. The CPU setting is selected. c. Change the CPU reservation to 0 (MHz). d. Click OK to commit the change.
110
Task 6: Configure a vSphere HA cluster with strict admission control

In this task, you will assign memory reservations to restrict Lab Cluster to have only four slots cluster wide. Lab Cluster will have two slots per ESXi host. Do this task as a cluster team. Student B should do the steps in this task. In task 5, when you configured your cluster with Host failures the cluster tolerates, you instructed vSphere HA to calculate slots. vSphere HA calculated space for a virtual machine to run, based on the largest CPU and memory allocation across all virtual machines. In this task, you will learn how strict admission control works.
1. Select Lab Cluster in the inventory and click the Virtual Machines tab. Shut down all virtual
machines.
2. After all virtual machines are powered off, click the Resource Allocation tab. 3. Identify the total memory capacity and divide it by the number of ESXi hosts in the cluster. The
result is the usable memory per ESXi host. For example, if you have two ESXi hosts in your cluster and the total capacity for memory is 3,410MB, then 3,410 / 2 = 1,705.
NOTE
The value for Total Capacity that you see in this step might differ from what you see in the screenshot. How much available memory is there per ESXi host? ____________________ The virtual machines have no memory reservations, so why is less memory available in the cluster than in the total memory installed in the ESXi hosts? ________________________________________________________________________
ANSWER: Because the cluster is configured to tolerate the loss of one of the two hosts, and there is overhead to run ESXi itself.
4. Assign to each virtual machine <your_name>-##-2, the memory reservation 256MB. a. Right-click each <your_name>##-2 virtual machine listed in the Resource Allocation tab
19
and select Edit Resource Settings.

b. Set the memory reservation to 256MB. c. Click OK to commit the changes. Lab 19 Using vSphere High Availability 111
5. Before powering on virtual machines, click the Lab Cluster Summary tab and click Advanced
Runtime Info. What is the total number of slots in the cluster? ____________________ Why is the vSphere Client reporting that many slots? ____________________
ANSWER: The vSphere Client reports N/A for the total number of slots because no virtual machines have been powered on yet. The slot size calculation considers only virtual machines that are powered on.
6. Click OK to close the Advanced Runtime Info window. 7. Right-click the <student_A_name>##-2 virtual machine and select Power > Power On. 8. To see the effect that powering on this virtual machine has on your cluster, click the Lab Cluster
Summary tab and click Advanced Runtime Info. Record the values that you observe: Total slots: ____________________ Used slots: ____________________ Available slots: ____________________ Failover slots: ____________________
ANSWER: There should be four total slots (two per host in the cluster): one used slot, one available slot, and two failover slots.
Why is the value for Failover slots only half the number of Total slots? __________________
ANSWER: Because you must reserve half of the slots to be able to tolerate the failure of one host in the cluster.
Record the values that you observe: CPU slot size (MHz): ____________________ Memory slot size (MB): ____________________ Why does the memory slot size not match the value you recorded in Preparing for the lab? __________________________________________________________________________
ANSWER: Because unlike the CPU slot size calculation, which is based solely on the largest CPU reservation, the calculation for memory slot size is based on the largest memory reservation, plus memory overhead.
112
9. Click OK to close the window. 10. In the inventory, right-click the <student_A_name>##-3 virtual machine and select Power >
Power On.
11. Click Advanced Runtime Info to see the number of available slots change.
How many slots are available now and why? ____________________

ANSWER: Zero slots are available because the cluster only has four slots. Of those slots, only two slots were originally available because you had to reserve two failover slots. You have used both of the two available slots.
12. Right-click the <student_B_name>##-2 virtual machine and select Power > Power On.
Was your virtual machine allowed to power on? Why or why not?
ANSWER: The virtual machine was not allowed to power on, because the cluster has no available slots.
If a cluster has N total slots, does that mean you can power on N virtual machines? ____________________
ANSWER: No. Of those N total slots, some will be failover slots. The number of virtual machines that you can run is necessarily less than the number of slots. For example, in a two-host cluster that tolerates the failure of one host, only N/2 slots are available.
Task 7: Prepare for upcoming labs

In this task, you remove the Lab Servers folder, which is no longer needed. Then you reconfigure your cluster for upcoming labs by removing the memory reservations that you set up previously and by disabling admission control. Do this task as a cluster team. Student A should do the steps in this task.
1. Right-click the Lab Servers folder inventory object and click Remove. 2. Click Yes to confirm the operation. 3. Select Lab Cluster in the inventory. 4. Click the Resource Allocation tab. 5. Click the Memory button to enter Memory view. 6. Remove the virtual machine memory reservation for each of the virtual machines: a. Select a virtual machine that has a memory reservation. b. Select the memory reservation value (for example, 256) and type 0. Press Enter. c. Select the next virtual machine. Remove the reservation as you did in step b.
19
113
7. Edit the settings of the cluster to allow the number of running virtual machines to exceed the
failover capacity of the cluster:

a. In the inventory, right-click Lab Cluster and select Edit Settings. b. In the left pane, select vSphere HA. c. In the Admission Control panel, select Disable: Allow VM power on operations that
violate availability constraints.

d. Click OK to commit your changes. 8. Keep the vSphere Client open for the next lab.
Task 5, step 6: If the Advanced Runtime Info link is missing, verify that Host Failures the Cluster Supports is selected. It is possible for both students to perform this task simultaneously, but the faster student must wait for the slower student to catch up before performing step 7. Task 7, step 8a: CPU should now show 512MHz. vSphere HA will evaluate all virtual machines to determine the highest reservations for CPU and memory, and base the slot size on that. Task 6, step 3: The same calculation can be applied to the total amount of CPU capacity: Total CPU capacity/Number of ESXi hosts in the cluster = Usable CPU cycles per host. Task 6, step 4: All training environments are assumed to have 4GB of RAM per ESXi host. If this is not the case, you might have to instruct your students to use a different value for the memory reservation. For example, a cluster that has a total memory capacity of 18,456MB has 9,228MB of memory capacity per ESXi host. To force creation of four slots in a cluster that tolerates only one host failure, you would have to assign a memory reservation of 2,048MB RAM to four virtual machines. Task 6, step 8: Note regarding the question Why does the memory slot size not match the value you recorded in Preparing for the lab?: In the Advanced Runtime Info window, be aware that the memory value in the Slot size field can fluctuate while the virtual machine is running. You might see this fluctuation because the virtual machines memory overhead can change based on the virtual machines workload. This discrepancy might affect the students answer to this question.
114
Lab 20
(Optional) Designing a Network Configuration

Objective: Design a network configuration for an ESXi host, based on a set of requirements
1. Analyze the requirements. 2. Design virtual switches and physical connections.

Based on a scenario, you design the network configuration for a VMware ESXi host, specifying the following: Virtual switches Ports and port groups Port group policies Physical connections A set of network requirements is provided. The requirements are not complete and they leave a good deal of detail to the imagination. Use your assumptions to complete those details (stating your assumptions when appropriate).
NOTE
20
This lab can be done separately by each member in the ESXi team.
Lab 20 (Optional) Designing a Network Configuration 115
Task 1: Analyze the requirements

In this task, you are the administrator in charge of configuring an ESXi host in your companys production environment. This ESXi host is one of several hosts that need to be configured identically in your production environment. This ESXi host needs to be configured so that it can be one node in a DRS/HA cluster. The cluster is not configured at this time, but all necessary networking details must be in place so that the cluster can be configured later. Details of the networking requirements include the following. Component Virtual machines and applications Networking requirements Web-based applications that are implemented by using four virtual machines arranged as follows: VM1 and VM2: Web servers, and network address translation (NAT) clients of VM3 VM3: front end for the Web servers. Acts as a NAT router for the back-end virtual machines VM4: a test box, used to test intrusion detection systems and virus-protection software, among other applications IP-based storage A NAS, used to hold running virtual machines for the test virtual machines only (storage for the production virtual machines is provided by a SAN) Four physical network adapters: one 100Mbps and three Gigabit Ethernet (GigE) cards Two physical switches and four external LANs, each named to indicate its purpose. A single physical switch is configured to handle traffic for three networks, which are implemented as VLANs. One physical switch is dedicated to the management LAN, which, by company policy, must be physically separate from all other networks. The management LAN is used by VMware vCenter Server, including being used to monitor VMware vSphere High Availability heartbeat.
Physical NICs External networks
116
Lab 20
Task 2: Design virtual switches and physical connections

In this task, you use the information in task 1 and the following diagram to draw a network configuration. Show all virtual switches and their ports and port groups and indicate the policies to be applied to each (NIC teaming, VLANs, security, traffic shaping). Also show the connections from the virtual machines to the virtual switches, as well as from the physical network interface cards (NICs) to the physical switches. There is no single correct answer. In fact, many reasonable solutions are possible. The point of this lab is not to come up with the one right answer. Rather, this lab encourages a discussion of the advantages and disadvantages of different solutions.
20
Lab 20 (Optional) Designing a Network Configuration
117
118
Lab 20
21
Lab 21
Configuring VMware vSphere Fault Tolerance

Objective: Configure Fault Tolerance for a virtual machine and verify that Fault Tolerance works
1. Prepare the virtual machine. 2. Enable Fault Tolerance logging. 3. Activate Fault Tolerance. 4. Test Fault Tolerance. 5. Disable Fault Tolerance.
NOTE
Not all classroom lab environments support VMware vSphere Fault Tolerance. If the hardware in your classroom does not support Fault Tolerance, do the exercise with the Fault Tolerance simulation provided by your instructor. Adobe Flash Player 8 or later is required to view the simulation.
Lab 21 Configuring VMware vSphere Fault Tolerance
119

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password VMware vSphere ESXi team to partner with
Task 1: Prepare the virtual machine

In this task, you will configure a virtual machine capable of using Fault Tolerance in a nested ESXi environment (that is, running ESXi hosts as virtual machines). Students should perform this lab as a team. Student A should do the steps in this task. Do this task only if your instructor tells you do it.
CAUTION
Nested ESXi is not an officially supported configuration, nor is running Fault Tolerance in nested ESXi. Neither configuration should be used in production environments. This task should be performed only by students using a nested lab environment. For example, the VMware vClass environment uses a nested environment, which requires additional steps to be performed to enable the lab to work. If you are unsure whether you should do this task, ask your instructor.
1. If the VMware vSphere Client is not already active, log in to the team vCenter Server
system as user root, with the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Virtual Machines and Templates. 3. Select one of the <your_name>##-# virtual machines, where ## corresponds to the number of
your ESXi host.

4. If the virtual machine is powered on, shut down the guest operating system. 5. Right-click the virtual machine and select Edit Settings. 6. Click CD/DVD drive 1 and ensure that the Client Device radio button is selected in the Device
Type field of the configuration.

7. Also ensure that the Mode Passthrough IDE (recommended) is selected. 8. Click the Options tab and select Advanced/General. 9. In the right pane, click Configuration Parameters. 10. In the Name column, find the replay.supported line. 11. In the Value column, change false to true. 120 Lab 21 Configuring VMware vSphere Fault Tolerance
12. Add the replay.allowFT and replay.allowBTOnly lines to the Configuration
21
Parameters.
a. On the Configuration Parameters page, click Add Row. b. In the Name column, type replay.allowFT. In the Value column, type true. c. In the Name column, type replay.allowBTOnly. In the Value column, type true. 13. To set an additional parameter, click the Options tab and select Advanced/General. Repeat this
step to enter another parameter. The Configuration Parameters page should look like the screenshot.
14. Click OK twice. Wait for the virtual machine to do a reconfiguration. After the configuration is
complete, leave the vSphere Client open and continue to the next task.
Lab 21 Configuring VMware vSphere Fault Tolerance 121
Task 2: Enable Fault Tolerance logging

In this task, you will configure a virtual switch for Fault Tolerance logging. Students should do the steps in this task individually.
1. Select Home > Inventory > Hosts and Clusters. 2. Select your ESXi host in the inventory and click the Summary tab. View the General pane.
The Host Configured for FT field should show No.

3. Click the Configuration tab. 4. Click the Networking link and click vSphere Standard Switch. 5. Scroll to the virtual switch that contains the VMkernel port named vMotion and click the
Properties link.
6. Select vMotion from the list and click Edit. 7. Select the Fault Tolerance Logging check box and click OK. 8. Click Yes to acknowledge the warning message.
Because of bandwidth requirements, in a production environment VMware does not recommend enabling both VMware vSphere vMotion and Fault Tolerance logging on a single physical or virtual adapter. Instead, dedicate one Gigabit Ethernet adapter each to vMotion and Fault Tolerance.
9. Click Close to close the vSwitch Properties dialog box. 10. Click the Summary tab and confirm that the Host Configured for FT field now shows Yes.
CAUTION
If this lab is performed in a nested ESXi environment, this field will continue to show No because ESXi is installed on virtual hardware, not physical hardware.
11. Wait for your ESXi host partner to complete this task.
Task 3: Activate Fault Tolerance

In this task, you will activate Fault Tolerance on a virtual machine. Student B should do the steps in this task.
1. If the vSphere Client is not already active, use the vSphere Client to log in to the team vCenter
Server system as user root. Use the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters. 3. Select a virtual machine in the inventory and verify that it meets the requirements for Fault
Tolerance, as outlined in the lecture book.

122 Lab 21 Configuring VMware vSphere Fault Tolerance
CAUTION
21
If this lab is performed in a nested ESXi environment, you must select the virtual machine that was configured in task 1.
4. Right-click the virtual machine and select Power > Shut Down Guest. Click Yes to confirm
shutdown.
5. Right-click the virtual machine and select Fault Tolerance > Turn On Fault Tolerance. 6. Read the warning window and click Yes to confirm that you want to activate Fault Tolerance. 7. Monitor the Recent Tasks pane while VMware vSphere High Availability is turning on Fault
Tolerance.
8. After the tasks complete, view the information in the Fault Tolerance panel on the Summary
tab of the virtual machine. On which host is the primary virtual machine? __________________________ On which host is the secondary virtual machine? ________________________
9. Power on the virtual machine and observe how the information in the Fault Tolerance panel
changes.
10. Select Lab Cluster in the inventory and click the Virtual Machines tab. Notice that both the
primary and the secondary virtual machines are displayed in the list.
Task 4: Test Fault Tolerance

In this task, you will test the Fault Tolerance configuration. Student A should do the steps in this task.
1. Open consoles to the primary and the secondary virtual machines. Arrange the consoles side by
side. Log in to the primary virtual machine as user Administrator.

2. In the primary virtual machine, open a Command Prompt window and type ipconfig.
What is the IP address of the primary virtual machine? __________________________

3. Start a continuous ping to your ESXi host: # ping -t <ESXi_host_name> 4. In the inventory, right-click your virtual machine and select Fault Tolerance > Test Failover to
simulate a virtual machine failure.

5. Quickly view the virtual machine consoles side by side and watch what happens over the next
couple of minutes. (Pay special attention to the console title bars.) What did you observe during the test? Did the ping operation see an increase in its TTL value during the failover?
Lab 21 Configuring VMware vSphere Fault Tolerance 123
6. Click the Lab Clusters Virtual Machines tab. View the host information displayed for the
primary and the secondary virtual machines.

7. In the Virtual Machines tab, double-click the primary virtual machine to open the virtual
machines Summary tab. View the Fault Tolerance information.

8. Access the console of the primary virtual machine. Press Ctrl+C to stop the continuous pings.
Close the consoles.
Task 5: Disable Fault Tolerance

In this task, you will disable Fault Tolerance for the virtual machine. Student B should do the steps in this task.
1. In the inventory, right-click the protected virtual machine and select Fault Tolerance. 2. Compare the warning messages that you would see if you were turning off Fault Tolerance
instead of disabling Fault Tolerance:

a. Click Turn Off Fault Tolerance. A warning message is displayed. Read the warning
message and notice which actions are taken. Click No.

b. Right-click the protected virtual machine and select Fault Tolerance. Select Disable Fault
Tolerance. Read the warning message and notice which actions are taken. Click No. What is the difference between Turn Off Fault Tolerance and Disable Fault Tolerance?
ANSWER: Turning off Fault Tolerance removes Fault Tolerance protection from this virtual machine and deletes all historical Fault Tolerance data. Disabling Fault Tolerance removes Fault Tolerance protection from this virtual machine but keeps historical information about Fault Tolerance performance.
3. Turn off Fault Tolerance. Right-click the protected virtual machine and select Fault Tolerance
> Turn Off Fault Tolerance. At the warning message, click Yes.
4. Verify that the Fault Tolerance pane on the Summary tab is no longer present.

This lab poses issues that you, the instructor, must be prepared to address smoothly with students. If you are delivering the labs on physical servers that are not supported by Fault Tolerance, you must explain to students that they will not perform the Fault Tolerance lab. Students will use the Fault Tolerance simulation, instead. If you are conducting this lab in the VMware vClass, be aware that the technique used to provide Fault Tolerance in the nested environment has not been thoroughly tested by VMware Engineering. It is an unsupported configuration. Although the nested environment has worked in the development of the lab exercise, VMware cannot guarantee that it will always perform in a predictable manner, or at all. No trouble tickets will be accepted for this lab. If a ticket is submitted to the VDC Support Team, the ticket will be closed with no comment. Set expectations with your students accordingly.
124
Lab 21 Configuring VMware vSphere Fault Tolerance
22
Lab 22
vSphere Distributed Resource Scheduler

Objective: Implement a DRS cluster
1. Create load imbalance. 2. Create a DRS cluster. 3. Verify proper DRS cluster functionality. 4. Create, test, and disable an affinity rule. 5. Create, test, and disable an anti-affinity rule. 6. Create, test, and disable a virtual machine to host an affinity rule.

Record the following information: Team VMware vCenter Server system name Team vCenter Server root password Virtual machine Administrator password VMware vSphere ESXi host to partner with
Lab 22 vSphere Distributed Resource Scheduler
125
Task 1: Create load imbalance

In this task, you will create load imbalance across the hosts. Student A should do the steps in this task.
1. If the VMware vSphere Client is not already active, log in to the team vCenter Server
system as user root. Use the password that you recorded in Preparing for the lab.
2. Migrate all the virtual machines to one host. See Lab 12 for a review of how to perform
migrations.
3. Select Home > Inventory > Hosts and Clusters. 4. Select Lab Cluster in the inventory and click the Virtual Machines tab. 5. Power on all virtual machines on one host. Right-click each virtual machine and select Power >
Power On. Wait for all virtual machines to power on.

6. Start an instance of cpubusy.vbs in three or four of the powered on virtual machines: a. Right-click a virtual machine and select Open Console. b. Log in to your virtual machine as user Administrator, with the password that you recorded
in Preparing for the lab.

c. Start an instance of the cpubusy.vbs script (on the virtual machines desktop) by right-
clicking the script and selecting Open with Command Prompt.

d. Repeat task 6 until you have three or four virtual machines running CPU busy.
NOTE
The number of virtual machines running cpubusy.vbs necessary to cause VMware vSphere Distributed Resource Scheduler (DRS) to begin migrations depends on the resource capacity of the lab infrastructure. Your instructor can advise you on how many virtual machines running cpubusy.vbs you need.
Task 2: Create a DRS cluster

In this task, you enable DRS on an existing cluster. Student B should do the steps in this task.
1. If the vSphere Client is not already active, log in to the team vCenter Server system as user
root. Use the password that you recorded in Preparing for the lab.
2. Select Home > Inventory > Hosts and Clusters.
126
3. Right-click the Lab Cluster inventory object and select Edit Settings: a. In the left column, ensure that Cluster Features is selected and select the Turn on
vSphere DRS check box.

b. In the left pane, click vSphere DRS and select Manual for the automation level.
22
c. Move the Migration Threshold slider to the right to Aggressive. d. Click OK to apply the changes.
Task 3: Verify proper DRS cluster functionality

In this task, you will verify that the DRS cluster is functioning properly. Student A should do the steps in this task.
1. Select Home > Inventory > Hosts and Clusters. 2. Click the Lab Cluster inventory object. 3. Click the DRS tab. 4. Click the Run DRS link. Clicking this link forces DRS to immediately evaluate the cluster and
provide recommendations instead of waiting the standard 5 minutes before generating recommendations.
5. Click the Summary tab. 6. Observe the vSphere DRS panel on the Summary tab.
Does the Current host load standard deviation field show that the load is imbalanced?_________.
ANSWER: Yes, because all the virtual machines are running on a single host.
7. Click the View Resource Distribution Chart link.
This chart displays the CPU or memory use per host. Point to each colored square. You see information on how much of the entitled resource (CPU or memory) each virtual machine is using.
8. Close the chart window. 9. Click the DRS tab. 10. Review the DRS recommendations. 11. Click Apply Recommendations and monitor the Recent Tasks pane for virtual machine
migrations. Wait for the virtual machine migrations to complete.

12. Click the Run DRS link in the upper right corner of the DRS tab. This action forces DRS to
evaluate the cluster status.

Lab 22 vSphere Distributed Resource Scheduler 127
13. Click the Summary tab.
Does the current host load standard deviation show that the load is balanced?_________.
ANSWER: No, because most of the powered-on virtual machines are running on a single host. See the instructor note at the end of this lab for more information.
14. Stop the cpubusy.vbs scripts in each virtual machine. Press Ctrl+C in each cpubusy window. 15. Close the virtual machine consoles.
Task 4: Create, test, and disable an affinity rule

In this task, you will create a rule that forces virtual machines to be placed on the same ESXi host. Students should do the steps in this task individually.
1. Select Lab Cluster in the inventory and click the Virtual Machines tab. Verify that each virtual
machine that you own is running on a different ESXi host. If the virtual machines that you own are running on the same ESXi host, select one to migrate to the other ESXi host in the cluster before you go to step 2. If you have one virtual machine on each ESXi host in the cluster, no action is necessary.
2. Right-click Lab Cluster in the inventory and select Edit Settings. The Lab Cluster Settings
dialog box is displayed.

3. In the left pane, select vSphere DRS > Rules. 4. Click Add. 5. Perform the following actions in the Rules dialog box.
Field Name Type Virtual Machines
Action Type Colocate <your_first_name> VMs. Select Keep Virtual Machines Together. Click Add. In the Virtual Machines dialog box, select the check box next to each of the virtual machines that you own, named <your_name>##-#. Click OK.
128
6. In the Rules dialog box, click OK. 7. Click OK to close the Lab Cluster Settings dialog box. 8. Click the Lab Cluster DRS tab. 9. Evaluate the cluster configuration by clicking the Run DRS link. Do you see any
22
recommendations?_________ Why or why not?_______________________________________________________________

ANSWER: Yes, because the DRS affinity rule that you created wants to keep the virtual machines together on the same host. NOTE
If you did not get a recommendation, use VMware vSphere vMotion migration to move one of your named virtual machines to the other ESXi host in the cluster. Return to the DRS tab and click Run DRS to see what the results are.
10. If you are ahead of your lab partner, wait for your partner to reach this point in the lab. 11. Student A should click Apply Recommendations and monitor the Recent Tasks pane as the
recommendation is applied. The virtual machines associated with your affinity rule are migrated to one of the two hosts in the DRS cluster.
12. Click the Virtual Machines tab. 13. Click the Host column heading to sort the virtual machines by the ESXi host on which they
reside. The virtual machines that you own should be running on the same ESXi host.
14. Right-click the Lab Cluster inventory object and select Edit Settings. 15. In the left pane, select vSphere DRS > Rules. 16. To disable the affinity rule, deselect the check box next to your affinity rule and click OK.
TIP
To delete an affinity rule, you select the rule and click Remove. For this lab, keep the rule disabled.
129
Task 5: Create, test, and disable an anti-affinity rule

In this task, you create a rule that forces the separation of virtual machines onto different ESXi hosts. Students should do the steps in this task individually.
1. Right-click Lab Cluster in the inventory and select Edit Settings. The Lab Cluster Settings

2. On the vSphere DRS > Rules page, click Add. 3. Perform the following actions in the Rules dialog box. Close the Lab Cluster Settings dialog
box when you are done. Rule field for anti-affinity rule 1 Name Type Virtual Machines Action Type Separate <your_first_name> VMs. Select Separate Virtual Machines. Click Add. In the Virtual Machines dialog box, select the check box next to each of the virtual machines that you own, named <your_name>##-#. Click OK.
4. In the Rules dialog box, click OK. 5. Click OK to close the Lab Cluster Settings dialog box. 6. Click the Lab Cluster DRS tab. 7. Click the Run DRS link to make DRS evaluate the state of the cluster and make
recommendations. A recommendation to separate your virtual machines should be displayed. If a recommendation is not displayed, check the rules that you created to verify the accuracy of your inputs.
8. If you are ahead of your lab partner, wait for your partner to reach this point in the lab. 9. Student B should click Apply Recommendations. 10. Monitor the Recent Tasks pane as the recommendations are applied. The virtual machines with
anti-affinity rules applied to them are migrated to another ESXi host in the cluster.
11. Click the Virtual Machines tab.
130
12. Click the Host column heading to sort the virtual machines by the ESXi host on which they
reside. The virtual machines you own should be running on different ESXi hosts.
13. Right-click Lab Cluster inventory object and select Edit Settings. 14. In the left pane, select vSphere DRS > Rules.
22
15. To disable the anti-affinity rule, select the check box next to your ant-affinity rule and click OK.
TIP
To delete an anti-affinity rule, you select the rule and click Remove. For this lab, the rule is only disabled.
Task 6: Create, test, and disable a virtual machine to host an affinity rule
In this task, you create virtual machine and host DRS groups. You create a rule that dictates which ESXi hosts that your virtual machines can run on. Students should do the steps in this task individually.
1. Right-click Lab Cluster in the vCenter Server inventory and select Edit Settings. 2. In the left pane, select vSphere DRS > DRS Groups Manager. 3. In the Virtual Machines DRS Groups panel, click Add. 4. In the DRS Group window, perform the following steps: a. Type <your_name>-VMs in the Name field. b. Click one of your named virtual machines to select it. c. Click >> to move your virtual machine to the box on the right. d. Perform steps 4b and 4c to move your other virtual machine to the box on the right. e. Click OK. 5. In the Hosts DRS Groups panel, click Add. 6. In the DRS Group window, perform the following steps. a. Type <your_name>-ESXi host in the Name field. b. Click the ESXi host assigned to you to select it. c. Click >> to move your ESXi host to the box on the right. d. Click OK. 7. In the left pane, click Rules. 8. Click Add. Lab 22 vSphere Distributed Resource Scheduler 131
9. In the Rules dialog box, perform the following actions.
Field/Setting Name Type Cluster VM Group
Action Type Run only on <your_name>-ESXi host. Select Virtual Machines to Hosts from the drop-down menu. Select <your_name>-VMs from the drop-down menu. Select Must run on hosts in group from the drop-down menu.
Cluster Host Group
Select <your_name>-ESXi host from the drop-down menu.
10. Click OK to close the Rules dialog box. 11. Click OK to close the Lab Cluster Settings window. 12. Click the Lab Cluster DRS tab. 13. Click the Run DRS link to make DRS evaluate the state of the cluster and make
recommendations. A recommendation to separate your virtual machines should be displayed. Why has DRS made this recommendation?_____________________________________
14. If you are ahead of your lab partner, wait for your partner to reach this point in the lab. 15. Student A should click Apply Recommendations. 16. Monitor the Recent Tasks pane as the recommendations are applied. The virtual machines with
virtual machine to host affinity rules applied to them are migrated to another ESXi host in the cluster.
17. Click the Virtual Machines tab. 18. Click the Host column heading to sort the virtual machines by the ESXi host on which they
reside. The virtual machine that you own that was running on your partners ESXi host should have been migrated to your ESXi host.
19. Right-click one of your named virtual machines in the inventory and click Migrate. 20. In the Migrate Virtual Machine wizard, perform the following actions.
Select Migration Type Select Destination
Select Change host. Expand the inventory view and select your partners ESXi host.
132
21. What do you see in the Compatibility field?________________________________________.

ANSWER: You receive the error message, Virtual machine '<your_name>##-#' on host '<host_name>' would violate a virtual machine-host affinity rule.
22. Click Cancel to close the Migrate Virtual Machine wizard.
22
23. Right-click the Lab Cluster inventory object and select Edit Settings. 24. In the left pane, select vSphere DRS > Rules. 25. To disable your virtual machine to host affinity rule, select the check box next to your rule to
remove the check and click OK. Leave your vSphere Client open for the next lab.
Task 3, step 13: Because the students have few virtual machines and hosts in the lab environment, DRS might not be able to balance the cluster. It is important that you are prepared to explain this behavior gracefully. Consider the following scenario: Suppose in the lab that a team has two hosts and three equally sized virtual machines. Running the three virtual machines on the two hosts is a scenario where the load cannot be balanced. The closest to balanced that DRS can achieve would be to run two virtual machines on one host and one virtual machine on the other. The resulting imbalance is not an indication of a failure in DRS. Correct any student misconceptions. Another DRS misconception to correct: At times, students see DRS report load imbalance in the cluster Summary tab (or in the resource distribution chart), but DRS does not make any recommendations. The students understandably (but incorrectly) conclude that DRS is not working. If this situation occurs in class, have the students examine the resource distribution chart. If all the virtual machines are green, the virtual machines are getting their resource entitlements met. If virtual machines are getting their entitlements met, then there is no benefit for DRS to migrate the virtual machines. Emphasize to students that two conditions have to be met before DRS can make recommendations: Load imbalance must be observed across the cluster. Virtual machines must not be getting their resource entitlements met. If students are still concerned that DRS is not working properly, explain that they will have to create a more real-world scenario. Instead of running only a few virtual machines, have them power on as many virtual machines as possible in the lab environment. To most quickly see DRS operating (lab time is limited), try to create extreme imbalance by running all those virtual machines on one host. Power off any remaining virtual machines on the other host. To create the other necessary condition for DRS to make recommendations, run an instance of cpubusy.vbs in as many virtual machines as possible. Verify that students have terminated the cpubusy.vbs instances.
133
134
Lab 23
VMware vSphere Update Manager

Objective: Install, configure, and use Update Manager
1. Install Update Manager. 2. Install the Update Manager plug-in into the vSphere Client. 3. Modify cluster settings. 4. Configure Update Manager. 5. Create a patch baseline. 6. Attach a baseline and scan for updates. 7. Stage the patches onto the ESXi hosts. 8. Remediate the ESXi hosts.
23
Lab 23 VMware vSphere Update Manager
135

Record the following information: VMware vSphere Update Manager system name Location of installation software Setup language Shared datastore Team VMware vCenter Server system name Team vCenter Server root password VMware vSphere ESXi patch bundle
Task 1: Install Update Manager

In this task, you will install Update Manager into one of the two desktop machines in your environment. Do this task as a team. Student A should perform this task.
1. Open a connection to the desktop of the Update Manager system that you recorded in
Preparing for the lab. This action is typically done with Remote Desktop Connection. Your instructor will provide specific details if you are to use some other technology.
2. Go to the location of the installation software, which you recorded in Preparing for the lab. 3. Double-click autorun.exe. 4. If Security Warning dialog boxes are displayed, click Run. 5. In the VMware vCenter Installer window, click the VMware vSphere Update Manager link. 6. Click Install to start the installation wizard. 7. Click Run when the Security Warning dialog box is displayed.
136
8. When prompted by the installation wizard, perform the following actions.
Field/Setting Setup Language Welcome page End-User Patent Agreement License Agreement Support Information IP Address/Name Port Username Password Database Options VMware vSphere Update Manager Port Settings
Action Select the setup language that you recorded in Preparing for the lab and click OK. Click Next. Click Next.
23
Select I accept the terms in the license agreement and click Next. Deselect Download updates from default sources immediately after installation and click Next. Enter the team vCenter Server system name or IP address that you recorded in Preparing for the lab. Accept the default. Type root. Enter the root password that you recorded in Preparing for the lab. Click Next. Accept the default and click Next. If name resolution is working, select the host name from the drop-down menu. If name resolution is not working, select the IP address from the drop-down menu. Accept the default selection for all other settings and click Next.
Destination Folder
Accept the default selection for all other settings and click Next. Click OK when the warning box is displayed.
Ready to Install the Program
Click Install.
9. Click Finish to close the installation wizard. 10. Click Exit to close the VMware vCenter Installer window. Lab 23 VMware vSphere Update Manager 137
Task 2: Install the Update Manager plug-in into the vSphere Client
In this task, you will install the Update Manager plug-in into the VMware vSphere Client on your desktop system. Students should do the steps in this task individually.
1. Open the vSphere Client and log in to your team vCenter Server system as user root. Use the

2. In the menu bar, select Plug-ins > Manage Plug-ins. 3. Under Available Plug-ins in the Plug-in Manager window, click the Download and Install link
next to VMware vSphere Update Manager Extension.

4. When prompted by the VMware vCenter Update Manager Client 5.1 wizard, perform the
following actions. If Security Warning dialog boxes are displayed, click Run. Field/Setting Setup Language Welcome page License Agreement Ready to Install the Program Action Select the setup language that you recorded in Preparing for the lab. Click Next. Select I accept the terms in the license agreement and click Next. Click Install.
a. When the installation completes, click Finish. b. When the security warning is displayed, select Install this certificate and do not display
any security warnings for <host_name> to prevent this warning from being displayed in the future.
c. Click Ignore to proceed with the connection. d. Verify in the Plug-in Manager window that the Update Manager plug-in was enabled. e. Click Close to close the Plug-in Manager window.
Keep the vSphere Client open.
138
Task 3: Modify cluster settings

In this task, you will enable VMware vSphere Distributed Resource Scheduler (DRS) in fully automated mode and disable VMware vSphere High Availability admission control. Students should work as a team to complete this task. Student B should perform this task.
1. Select Home > Inventory > Hosts and Clusters. 2. Right-click Lab Cluster in the inventory and select Edit Settings. The Lab Cluster Settings

3. In the left pane, select vSphere DRS. Select Fully Automated. This operation ensures that
23
DRS migrates virtual machines to other nodes in the cluster.

4. In the left pane, select vSphere HA. Click Disable: Allow VM power on operations that
violate availability constraints in the Admission Control field.

5. Click OK. 6. Select Lab Cluster in the inventory and click the Resource Allocation tab. 7. Observe the Reservations column to verify that no CPU and memory reservations are assigned
to virtual machines. Removing CPU and memory reservations is necessary for this training environment. In a production environment, you might not have to remove CPU or memory reservations.
Task 4: Configure Update Manager

In this task, you will import ESXi host patches from an archive on your desktop and configure settings for Update Manager. Do this task as a team. Student A should perform this task.
1. Select Home > Solutions and Applications > Update Manager. 2. Click the Configuration tab. 3. Click the Download Settings link. 4. Click the Import Patches link. 5. Click Browse and select the ESXi patch bundle that you recorded in Preparing for the lab.
Click Next.
6. When the security warning is displayed, select Install this certificate and do not display any
security warnings for <host_name> to prevent this warning from being displayed in the future.
7. Click Ignore to proceed with the connection. 8. Click Finish to complete the import operation.
139
Task 5: Create a patch baseline

In this task, you will create a patch baseline for both ESXi hosts and scan the ESXi hosts for compliance. Do this task as a team. Student B should perform this task.
1. Click the Baselines and Groups tab. 2. In the Baselines panel, click the Create link.
You see two Create links: one under the Baseline panel and one under the Baseline Groups panel. Click the Create link under the Baseline panel.
3. When prompted by the New Baseline wizard, perform the following actions.
Field/Setting Baseline Name Baseline Description Baseline Type Patch Options Patches
Action Type ESXi Host Update. Type Patch for ESXi 5.1. Keep the default value and click Next. Select Fixed and click Next. Scroll to the right and select patch ESXi510-201303202-UG. Click the down arrow under the horizontal scroll bar to add the patch to the Fixed Patches to Add pane and click Next.
Ready to Complete
Review your patch baseline. Verify the accuracy of Baseline Name and Baseline Type and click Finish.
Task 6: Attach a baseline and scan for updates

In this task, you will scan the ESXi hosts in your cluster for baseline compliance. Do this task as a team. Student A should perform this task.
1. In the upper-right corner of the Baselines and Groups tab, click the Compliance View link. 2. Select Lab Cluster in the vCenter Server inventory and click the Update Manager tab.
If you do not see the Update Manager tab, click the right arrow to access it.
3. Click the Attach link. The Attach Baseline or Group dialog box is displayed.
140
4. Select the check box next to ESXi Host Update and click Attach. 5. Click the Scan link. 6. In the Confirm Scan window, verify that the Patches and Extensions and Upgrades check
boxes are selected.

7. Click Scan. 8. Monitor the Recent Tasks pane and wait for the scan to finish. When the task is complete, the
scan should discover that the ESXi hosts are noncompliant.
23
Task 7: Stage the patches onto the ESXi hosts

In this task, you will copy the patches contained in the baseline to your ESXi host and apply the patches. Students should do the steps in this task individually.
1. You should see both ESXi hosts on the Lab Cluster Update Manager tab. Select your host
from the right pane, not from the vCenter Server inventory in the left pane.
2. Click Stage. 3. When prompted by the Stage wizard, perform the following actions.
Field/Setting Baseline Selection
Action Accept the default selections and click Next. In the Patches column, you see that zero patches are staged.
Patch and Extension Exclusion Ready to Complete
Accept the default selections and click Next. Click Finish.
4. Monitor the Recent Tasks pane for the staging tasks. Wait for the tasks to complete.
NOTE
Both team members must complete task 7 before proceeding to task 8.
141
Task 8: Remediate the ESXi hosts

In this task, you will apply the patches that were staged in task 7. Do this task as a team. Student B should perform this task.
1. Select Lab Cluster in the vCenter Server inventory. 2. To begin the patching process, click Remediate. 3. When prompted by the Remediate wizard, perform the following actions.
Field/Setting Remediation Selection Patches and Extensions Schedule Host Remediation Options
Action Leave the default and click Next. Leave the default and click Next. Leave the default and click Next. Select Disable any removeable media devices connected to the virtual machines on the host. Leave all other fields at their default selection and click Next.
Cluster Remediation Options
Deselect Disable Distributed Power Management (DPM) if it is enabled for any of the selected clusters. Click Generate Report to identify which tasks the remediation process performs for you. Click Close and click Next.
Ready to Complete
Review and verify your selections for accuracy. Click Finish.
4. Monitor the Recent Tasks pane and answer the following questions: a. Which ESXi host was remediated first?___________________ b. Was it placed into maintenance mode by the remediation process?____________________ c. Were virtual machines migrated to the other node in cluster?________________________ d. Was the patch installed on the ESXi host in maintenance
mode?________________________
e. Was the patched ESXi host rebooted?___________________ 142 Lab 23 VMware vSphere Update Manager
f. Did the patched ESXi host exit maintenance mode?_______________ g. Was the other node placed into maintenance mode?________________ h. Were the virtual machines that the ESXi host migrated to the other node in
cluster?______________
i. Was the other ESXi host patched?___________________ j. Did the other node exit maintenance mode?_________________
The hosts in Lab Cluster show 100 percent compliance when remediation completes.
23
ANSWER: a. Answer can vary. b. Yes c. All powered-on virtual machines were migrated. Any powered-off virtual machine did not get migrated. d. Yes e. Yes f. Yes g. Yes h. Yes i. Yes j. Yes Other patches either force the restart of hostd, require maintenance mode, or might require a reboot or a combination of these three actions. One patch that forces maintenance mode and a reboot has been selected to show the automation involved with applying patches.
143
144
Lab 24
(Optional) Installing VMware vCenter Server

Objective: Install vCenter Server components
1. Install vCenter Server.
:
24

Record the following information: Your VMware vCenter Server system name vCenter Server Administrator password Location of the vCenter Server installation software Setup language Local system name UNC user name UNC user password
Lab 24 (Optional) Installing VMware vCenter Server
145
Task 1: Install vCenter Server

In this task, you will install vCenter Server software. Students should do the steps in this task individually.
1. Go to the location of the vCenter Server installation software, which you recorded in Preparing
for the lab.

2. Start the VMware vCenter Installer:
If you have an ISO image or physical CD-ROM mounted on the vCenter Server systems CD-ROM drive and autorun is enabled, the installer main window is displayed. For files that are located in a local folder or that are on a network share, open the folder containing the files and double-click the autorun.exe file. If security warning messages are displayed, click Run to continue.
3. Click the vCenter Server Simple Install link and click Install. If a security warning message
is displayed, click Run to continue.

4. When prompted by the installation wizard, perform the following actions.
Field/Setting Welcome Page End-User Patent Agreement License Agreement Single Sign On Information Single Sign On Database Local System Information
Action Click Next. Click Next. Select I agree to the terms in the license agreement and click Next. You do not assign a license for this lab. In the Password and Confirm Password fields, type the password that you recorded in Preparing for the lab. Accept the default option and click Next. In the Fully Qualified Domain Name or IP address field, verify that the name you recorded in Preparing for the lab and click Next. Accept the default option and click Next. Accept the default folder and click Next.
Security Support Provider Interface Destination Folder
146
Field/Setting vCenter Single Sign On Port Settings Ready to Install Database Initialization Warning Ready to Install License Key Database Options vCenter Server Service
Action Accept the default port and click Next. Click Install. Accept the default value and click Next. Click Install. Dont enter a license key and install in evaluation mode and click Next. Select Install a Microsoft SQL Server 2008 Express instance and click Next. Select Use SYSTEM Account. Verify that the default fully qualified domain name matches your local system name, which you recorded in Preparing for the lab. If the values do not match, change the FQDN to the correct value. Click Next. Accept the default and click Next. Accept the default and click Next. Click Install.
24
Configure Ports vCenter Server JVM Memory Ready to Install the Program
5. When the installation is complete, click Finish to exit the wizard. 6. Close the VMware vCenter Installer window.
147
148

VMware Vsphere 5.1 Install Configure Manage Lab Manual

Uploaded by

Copyright:

Available Formats

VMware Vsphere 5.1 Install Configure Manage Lab Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VMware Vsphere 5.1 Install Configure Manage Lab Manual

Uploaded by

Copyright:

Available Formats

What is the purpose of this document?

What is the purpose of this document?

What topics are covered in the labs?

What topics are covered in the labs?

VMware vSphere: Install, Configure, Manage

Student Lab Manual ESXi 5.1 and vCenter Server 5.1

VMware Education Services VMware, Inc. www.vmware.com/education

VMware vSphere: Install, Configure, Manage

VMware vSphere: Install, Configure, Manage

Installing VMware vSphere Graphical User Interfaces

Preparing for the lab

Lab 1 Installing VMware vSphere Graphical User Interfaces

Task 1: Access your student desktop system

might have you use Remote Desktop Connection.

recorded in Preparing for the lab.

Task 2: Install the vSphere Client

Lab 1 Installing VMware vSphere Graphical User Interfaces

6. When the installation is complete, click Finish.

recorded the name in Preparing for the lab.

for the lab.

to prevent this warning from being displayed in the future.

the inventory view on the left side of the window.

Lab 1 Installing VMware vSphere Graphical User Interfaces

Lab 1 Installing VMware vSphere Graphical User Interfaces

Configuring VMware ESXi

Preparing for the lab

Task 1: Connect to an ESXi host with the vSphere Client

with login procedures for your specific lab environment.

Preparing for the lab. Click Login.

license expires, click OK.

Task 2: View the host hardware configuration

information about your ESXi host processors.

5. Click OK to close the DNS and Routing Configuration dialog box.

Lab 2 Configuring VMware ESXi

Task 4: Configure an ESXi host as an NTP client

the NTP client is stopped and that no NTP server is defined.

Field/Setting Date and Time NTP Configuration

General NTP Settings

Client is listed as Running.

Lab 2 Configuring VMware ESXi

Task 5: Configure an ESXi host to use the directory services

Field/Setting User Directory Service Domain Settings Join Domain

Lab 2 Configuring VMware ESXi

Lab 2 Configuring VMware ESXi

Working with Virtual Machines

Preparing for the lab

Lab 3 Working with Virtual Machines

Task 1: Create a virtual machine

Field/Setting Configuration Name (of virtual machine)

Virtual Machine Version Guest Operating System

Number of virtual processors Memory

How many NICs do you want to connect

Lab 3 Working with Virtual Machines

virtual machine creation and click OK.

Lab 3 Working with Virtual Machines

Task 2: Install a guest operating system in a virtual machine

Task 3: Identify a virtual machines disk format and usage statistics

Lab 3 Working with Virtual Machines

Administrator password that you recorded in Preparing for the lab.