Scribd
Upload
199 views

Netbackup AIR Configuration

1. Configure DNS entries for NetBackup servers nbur.techaccesspak.co and NBUTP.techaccesspak.com. 2. Verify there is sufficient storage space of 56GB on the /storage volume. 3. Configure two NetBackup storage servers - one on each server for a replicated configuration with disk pools and storage units.

Uploaded by

muhammad Noman Alam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
199 views

Netbackup AIR Configuration

1. Configure DNS entries for NetBackup servers nbur.techaccesspak.co and NBUTP.techaccesspak.com. 2. Verify there is sufficient storage space of 56GB on the /storage volume. 3. Configure two NetBackup storage servers - one on each server for a replicated configuration with disk pools and storage units.

Uploaded by

muhammad Noman Alam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

NBUR 1. more /etc/hosts nbur.techaccesspak.co NBUTP.techaccesspak.

com nbur NBUTP

2. df -h /storage 56gb 3. netbackup GUI ./jnbSA& a.device and management->credientials->storageserver>newstorgaeserver->puredisk b.storage server name:NBUTP.techaccesspak.com media server: nbur credientials:: username: root password: root confirm password:root (NBUTP) c. press NEXT stroage server credientials verify and configure d. diskpool:: diskpool name PDP e. storage unit: PSU f.finish 4. a.device and management->credientials->storageserver>newstorgaeserver->select puredisk b.storage server name:nbur.techaccesspak.com media server: nbur credientials:: username: root password: root123 confirm password:root123 (Nbur) c. press NEXT stroage server credientials verify and configure d. diskpool:: diskpool name PDPT e. storage unit: PSUT

f.finish 4. select storage server replication tab add NBUTP server name for replication. 5. devices->diskpool a. double click PDP press button add then select backup, storage unit PSU retention fixed b. press button Add select replication retention fixed 6. storage-> SLP-> new a. SLP name ASLP

You might also like