Scribd
Upload
766 views2 pages

Form Qexp-2 Suggested Format For Tube-To-Tubesheet Expanding Procedure Qualification Record For Test Qualification (Tepqr)

This document provides a suggested format for a tube-to-tubesheet expanding procedure qualification record. The format includes sections to document the company name, procedure number, expanding process used, tube and tubesheet materials, test apparatus used, test parameters such as temperature and loading rate, results of shear load tests including failure loads and modes, and approval status.

Uploaded by

Natrajj Sivakumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
766 views2 pages

Form Qexp-2 Suggested Format For Tube-To-Tubesheet Expanding Procedure Qualification Record For Test Qualification (Tepqr)

This document provides a suggested format for a tube-to-tubesheet expanding procedure qualification record. The format includes sections to document the company name, procedure number, expanding process used, tube and tubesheet materials, test apparatus used, test parameters such as temperature and loading rate, results of shear load tests including failure loads and modes, and approval status.

Uploaded by

Natrajj Sivakumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FORM QEXP-2 SUGGESTED FORMAT FOR TUBE-TO-TUBESHEET EXPANDING PROCEDURE QUALIFICATION RECORD FOR TEST QUALIFICATION (TEPQR)

Company name Procedure Qualification Record no. TEPS no. Expanding process(es) (Rolling, hydroexpanding, explosive expanding, hybrid expanding) Expanded tube length (If there is a gap in the expanded zone, record the total expanded length) Joints (HH-7) Driver types (Electric, air-driven, hydraulic, other) Tube pitch Date

Sketch of Test Array Tubesheet Material{s) Material spec. Diameter and thickness of test specimen No. and location of joints to be tested No. and description of annular grooves Hole surface finish Yield stress (from mill test report) Other

Type or grade Hole diameter and pitch arrangement

Testing Apparatus (Manufacturer, type, calibration date) Rate of loading to avoid impact [Maximum '12 in, (13 mm) per minute]

Tube Material{s) Material spec. Hole surface finish Yield stress (from mill test report) Other

Type or grade

FORM QEXP-2 (Back) Shear Load Test (See Appendix A, Fig. A-3) Tube No. Position in Array Diameter Thickness Cross-Sectional Area Test Temp.

L, (test)

Manner of Failure

Tube No.

Position in Array

Diameter

Thickness

Cross-Sectional Area

Ambient Temp.

L2 (test)

Manner of Failure,

Mean value of L, (test). Standard deviation.

Mean value of L2 (test) Standard deviation Satisfactory (see Appendix A, A-5)

f, (test) (see Appendix A, A-4 Operator's name f, (test) (see Appendix A, A-4 Manufacturer Date Remarks: By Clock no

You might also like